• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.3
• /
• pp.194-201
• /
• 2017

The KARI-11-180 airfoil was selected as a model for EFD-CFD comparison workshop case 1. Wind tunnel test for this model was conducted in KARI low speed wind tunnel with $0.6m{\times}3.0m$ model for the Reynolds number up to 3.0E6. The model configuration and wind tunnel test results including Cl, Cd and Cp were released at the KSAS 2015 spring conference. The computational analysis results with KFLOW, FLUENT and STAR-CCM+ were present in the KSAS 2015 fall conference. These computational works were summarized in this paper and the comparison results with each others including the wind tunnel data were also summarized.

• Journal of the Korean Geotechnical Society
• /
• v.30 no.9
• /
• pp.29-39
• /
• 2014

In this study, model pile-load test with numerical analysis was carried out to compare and analyze pile behaviour according to interface properties. In the model test, Close Range Photogrammetry (CRP) was chosen to measure the ground deformation. In addition, model steel and concrete piles were used. Based on the model pile test, interface elements around the model pile were used to simulate the slip effect. Interface properties were adopted as interface reduction factor $R_{inter}$. Interface reduction factor, $R_{inter}$ plays a key role in the interface properties. Through this study, it was found that the model ground behaviour measured by CRP corresponded well to the one predicted by the numerical analysis. And, the interface strength reduction factor, $R_{inter}$ value of the steel pile was higher than that of the concrete pile.

• Journal of the Korean Geosynthetics Society
• /
• v.15 no.4
• /
• pp.63-69
• /
• 2016

In this paper, shear strength characteristics of an unsaturated soil were compared using triaxial compression tests(CD) and modified direct shear tests and thus feasibility of the newly modified direct shear testing apparatus was confirmed. The shear strength tests of unsaturated state with a soil sample, obtained from a slope where debris flow occurred at Yangpyeong in Kyeunggi province during 2010, were performed. Both tests showed a linear relationship of matric suction with the shear strength under low level of matric suction. The apparent cohesion of the unsaturated soil was also increased linearly with increase of matric suction. As results of comparing two different testing apparatus, estimated values of shear strength parameters of unsaturated soil($c^{\prime}$, ${\phi}^b$) were slightly larger in the modified direct shear tests due to constraint effect of shear box.

• Fire Science and Engineering
• /
• v.25 no.4
• /
• pp.35-41
• /
• 2011

Casualties due to toxic smoke products have been reported as major fire damage. There are various tests in order to evaluate toxic smoke from a fire at home and abroad, and KS F 2271 as a test of the gas hazard of building finish materials has been conducted in Korea. The current test of the gas hazard exposes rodent, laboratory rat, to smoke gases to evaluate combustion gas toxicity by measuring acting time of that. this study performed a test of the gas hazard for combustible polymer material, Urethane and rubber flooring, and determined gases with the FT-IR. Quantitative results compared with standard value defined in BS6853 and toxicity index (R) was calculated. Using relative comparison with animal test and the toxicity index, We tried a variety of toxicity evaluation by correlation analysis of two tests.

• Food Science of Animal Resources
• /
• v.24 no.3
• /
• pp.221-224
• /
• 2004

The feeding group, composed of weaning pigs fed 3 mL of glucosamine derivatives, was compared for the carcass and quality characteristics with the unfeeding control group for 25∼70 days since they were born. The results were as follows; There were no significant differences in carcass weight and back-fat thickness between the feeding group and the unfeeding group although the feeding group had low ranges of standard error when compared to the control. Feeding group had higher incidence frequencies of A grade (42.7%) than the control (29.2%). The feeding group and unfeeding group had no significant differences in meat color, cooking loss, WBS, pH, WHC and purge loss. Results from this study showed that feeding GD had effect on the decrease the market weight and production of consist carcass weight, however, the feeding GD had no effect on pork quality during rearing times after weaning.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.11a
• /
• pp.45-45
• /
• 2011

최근 환경과 건강에 대한 관심이 증대되면서, 복합기능을 갖는 다기능성 섬유에 대한 요구가 증대되고 있는 실정이다. 일반적으로 기능성은 마이크로캡슐이나 후가공제를 이용하여 일반 섬유 제품에 적용하고 있다. 마이크로캡슐이나 후가공제가 적용된 일반 섬유제품은 일상생활 속에서의 마찰 및 세탁 등으로 인해 기능 저하가 발생된다. 이러한 문제점을 개선하기 위해 특수 방사 기술을 이용하여 다기능성을 갖는 섬유 제조 기술이 개발되고 있다. 다기능성 섬유소재 및 응용제품은 그 제조 공정성이 우수하고, 염색 가공 등의 후 공정 조건에 의해 기능성 저하를 초래하지 않고, 지속시간이 오래 유지해야하는 조건을 만족해야한다. 이러한 기능성 저하 문제를 해결하고 내구성 향상 및 기능성의 지속 시간을 오래 유지하기 위하여 복합 방사 기술을 이용하여 이형 단면 원사, Sheath-Core 단면 원사 등이 개발되고 있다. 개발된 기능성 원사의 경우 일반 원사와 다른 형태의 염색성을 보일 수 있으며, 염색 온도 및 염색 시간 등 염색 조건이 달라질 수 있다. 본 연구에서는 식물 등에서 추출한 천연 항균 유기물을 마이크로캡슐화하여 이형단면의 심부에 담지된 형태인 Sheath(Nylon: 50%)-Core(PP MB: 50%) 원사의 염색성 평가 시험을 실시하였다. 시험 방법은 Sheath-Core 원사와 일반 Nylon 원사와 염착 거동 시험을 통해 비교해 나타냈고, 염색 전 후의 물성을 비교해보았다. 또한 염색성 평가 시험을 토대로 기능성 원사의 염색 온도와 시간에 따른 색차 비교 시험을 통해 기능성 원사의 염색 조건을 선정하는 시험을 실시하였다.

• The Korean Journal of Applied Statistics
• /
• v.32 no.1
• /
• pp.1-13
• /
• 2019

An adaptive seamless Phase II/III clinical trial design enables a reduction in the sample size (in comparison to a conventional design) that also shortens the clinical development time. It is also very effective in clinical trials since it can have higher statistical power than Phase III alone. In this study, we use extensive simulation studies to compare several multiple hypothesis testing methods that can help select the best doses in a Phase II study along with several methods to combine p-values of the Phase II and Phase III study.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.4
• /
• pp.136-143
• /
• 2016

There are various method for evaluating the durability life of concrete structures due to salt damage. The best way is to perform a corrosion test for a rebar embedded in concrete specimen was exposure to marine environment. However, this method has the disadvantage that it takes a long period of time. Also, accelerated corrosion test which was complemented complements the time-consuming weakness is limited to apply because it could not reveal a correlation between long-term exposure test. Accordingly, the purpose of this study is to derive a correlation coefficient between cycle drying-wetting accelerated corrosion test and long-term exposure test. Corrosion initiation time was measured in four types of concrete samples, i.e., two samples mixed with fly ash(FA) and blast furnace slag(BS), and the other two samples having two water/cement ratio(W/C = 0.6, 0.35) without admixture(OPC 60 and OPC 35). The accelerated corrosion test was carried out by two case, i.e., one is a cyclic drying-wetting method(case 1), and the other is a artificial seawater ponding test method(case 2). Whether corrosion occurs, it was measures using half-cell potential method. The results indicated that case 1 is to accelerated the corrosion of rebar about 24~36% as compared with case 2, then the corrosion of rebar embedded in concrete occurred according to the order of OPC60, FA, BS, OPC35. Correlation coefficient between accelerated corrosion test and long-term exposure test, case 1 is 4.23 to 5.42, and case 2 is 6.54 to 7.82.

• Journal of the Korean Society for Railway
• /
• v.12 no.4
• /
• pp.548-556
• /
• 2009

In order to evaluate applicability of rock cut-slope investigation system, typical clinometer and photogrammetry investigation system were used for rock slopes; first for 7 discontinuities, and secondly, 10 discontinuities, and the results were compared. The first verification was performed depending on discontinuity joint shapes and slope angles, and the second verification was performed depending on shot time and shot locations. The results showed that differences of dip direction $1^{\circ}{\sim}4^{\circ}$, dip $0^{\circ}{\sim}4^{\circ}$. In the second verification test, the differences of dip direction was $0^{\circ}{\sim}6^{\circ}$, and dip $0^{\circ}{\sim}6^{\circ}$. The photogrammetry method for rock slope survey system is quite reliable when clinometer generally shows ${\pm}10^{\circ}$ errors due to surface roughness and investigator.

• Journal of Convergence for Information Technology
• /
• v.7 no.5
• /
• pp.83-88
• /
• 2017

This paper describes the azimuth accuracy test of phase comparison direction finding method using F-16 fighter scale-down model. When the antennas are placed on the bottom of a fighter, reflection signals caused by an aircraft structure arises and an azimuth error occurs. In this research, the F-16 fighter scale-down model was made to 5:1, and five antennas were placed on the bottom of the model, then the radio waves of emitters were received by the antennas in the $0-360^{\circ}$ azimuth angles. The accuracy test was performed by numerically analyzing the phases of the radio waves received by the five antennas. The azimuth error of the phase comparison direction finding with scale-down model was measured to be less than $0.5^{\circ}$ when the signal noise ratio was larger then 0dB, and it could be very useful for the design of the phase comparison direction finding method of the fighter.