• Journal of Aerospace System Engineering
• /
• v.11 no.6
• /
• pp.50-55
• /
• 2017

The objective of this study was to use the Lanchester equation to predict the outcome of our engagement between our unmanned aerial vehicle (UAV) (Blue Group) and enemy UAV (Red Group). Lanchester's law states that the power of corps is proportional to the number of combatants. A second law states that the power of corps is proportional to the square of the number of combatants. The first law is a suitable law for guerrilla warfare while the second law is known as the law suitable for all-out war. Therefore, the second law is commonly used. The second law of Lanchester's was used in this study to predict engagement results. We estimated the battle loss rate value to win the battle as well as the required power number. We also predicted power number to make the damage of our group less than one. The battle loss rate to reliably receive victory when the enemy's UAV and the ally's UAV are equal in number of combat units must be 1: 1.5 or more.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.8A
• /
• pp.613-619
• /
• 2003

Bluetooth is a communication technology enabling short-range devices to be wirelessly connected. A master and one or more slave devices are connected to form a piconet, and piconets are joined to form a scatternet. The units participating in two or more piconets in a scatternet, is called bridge or gateway nodes. In order to operate the scatternet efficiently, both piconet scheduling for the master and slaves of a piconet, and scatternet scheduling for the bridge nodes are playing important roles. In this paper, we propose a traffic-adaptive dynamic scatternet scheduling algorithm based on rendezvous points and rendezvous windows. The performance of the proposed algorithm is compared and analyzed with that of a static scheduling algorithm via simulations. Simulation results show that our algorithm can distribute wireless resources efficiently to bridge nodes depending on the traffic characteristics.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.8
• /
• pp.958-966
• /
• 2012

This paper presents a compact bluetooth/WiFi dual-mode dual-band RF front-end module(FEM) is realized by low temperature co-fired ceramic(LTCC) technology. The proposed RF front-end module consists of a diplexer, baluns in the LTCC substrate, and an SPDT switch, an SP3T switch on the LTCC substrate. In order to reduce the module size and increase integration level, the proposed diplexer and balun are designed using LC lumped elements. The parasitic elements caused by coupling effect between metal pattern layers and ground plane layer are considered during the design. The fabricated dual-mode RF front-end module has 13 pattern layers including three inner ground layers and it occupies less than $3.0mm{\times}3.7mm{\times}0.66mm$.

• Journal of the Korean Society of Radiology
• /
• v.2 no.1
• /
• pp.5-10
• /
• 2008

This study developed a PDA based wireless communication radiation measuring instrument using Bluetooth. The proposed system is composed of Student Radiation Monitor of Vernier using GM (Geiger Mueller) counter tube as a radiation measuring sensor, LabPro of Vernier as a module for data collection, Promi SD 101 of Initium, which can make Bluetooth communication up to 30 m, for wireless data transmission, and HP 5550 embedded with Pocket PC 2003 as OS for data storage and display. Because GM counter tube is used as a radiation measuring sensor, the system cannot measure radiation energy but measures count volume and count rate. When the result of natural radiation measuring by the PDA based system was compared with that by a PC based system, it was found that the proposed system transmits and receives data without distortion.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.4
• /
• pp.329-332
• /
• 2017

In this study, a performance evaluation was carried out to develop a new add-on device with an algorithm for automatically measuring the exercise weight and repetitions when using an existing fitness machine. The developed device was designed to be simply attached to an exercise machine to measure the exercise weight and repetitions. The measured data are transferred to a smartphone using Bluetooth. As result, it is possible to detect the weights and repetitions from three users with different exercise habits with little error. The system can measure the user's motion and transfer the data to various devices capable of utilizing the workout data, giving it the advantage of being applicable to personalized health care and rehabilitation therapy.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.31 no.6
• /
• pp.95-103
• /
• 2004

A turfgrass rootzone foundation is one of the important iufluences on the growth of cool-season turfgrass such as Kentucky bluegrass, which is usually grown on korean golf courses and athletic fields in Korea. This study was carried out to evaluate the growth of Kentucky bluegrass on 4 types of turfgrass root-zone foundations: a 2cm thickness of Sand 90%+Peat humus 8%+Zeolite 2% mixture on a subsoil base (C), a 20cm thickness of Sand 90%+Peat humus 8%+Zeolite 2% mixture (S), a 20cm thickness of Sand 45%+fine sand(a sort of Bomyungsa) 45%+Peat humus 8%+Zeolite 2% mixture (S+F), and a 20cm thickness of Sand 45%+fine sand(a sort of Bomyungsa) 45%+Peat humus 8%+Zeolite 2% mixture on a 20cm thick drainage layer (S+F(G)). Visual ratings of Kentucky bluegrass on the C foundation were low throughout the experiment when compared to S, S+F, and S+F(G) foundations, which contained high contents of sand with a high water infiltration rate. However, poor growth of Kentucky bluegrass in the summer of 1991 on the S foundation was likely to be caused by a too high water infiltration rate (185.8cm/hr). The growth of Kentucky bluegrass on the S+F(G) was good while the growth was a little weak at the developing stage on the S +F foundation. If the cost had to be considered when constructing golf courses and athletic fields, The S+F foundation without the drainage layer would be the best choice in terms of low cost and good quality of Kentucky bluegrass compared to the S+F(G). In this result, the infiltration rate was regarded as the most influential factor to the growth of Kentucky bluegrass on rootzone foundations.

• Journal of KIISE:Information Networking
• /
• v.30 no.1
• /
• pp.38-47
• /
• 2003

Communication between Bluetooth devices is based on TDD by a master unit. In this discipline, the transmission of slave packets can be made only when the master transmits a packet to the slave. Thus, some slots may be wasted when there is no user data in the master's or slave's queue due to the transmission of a POLL or NULL packet. Therefore a scheduling scheme which can minimize the slot waste is required in Bluetooth intra-piconet communication. However, since the master is responsible for the intra-piconet scheduling, it must be provided with an information on each slave's queue length to apply traditional scheduling schemes. which is impossible in Bluetooth. This paper presents a new Bluetooth intra-piconet scheduling scheme that is efficient and does not require the information on each slave's queue length. The scheduling is done based on the information about the existence of data in the master and slave queues which is derived by the master identifying the type of packets transmitted. The master schedules to communicate with the slaves according to the priorities determined based on this information. We Presents simulation results which indicate a significant improvement in the performance when our proposed scheme is used.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.12
• /
• pp.5946-5956
• /
• 2011

The purpose of this study is to discourage urban sprawl that optimize the use of natural resources and reduce demand for transportation, energy consumption, and also protect green and blue networks. For this purpose, this study discusses about the Sustainable Development (SD), urban systems toward SD and defines the concepts and the goals of Green Compact City (GCC). It then finds out the basic planning strategies to agree with GCC. Based on these strategies, it reviews the foreign case study, to obtain a mainly significance development of these planning strategies. As well as then conducts a questionnaire survey to experts and residents of Ulaanbaatar (UB) city to obtain a better understanding of the current condition and the most significant planning strategies in UB city. Therefore the basic planning strategies which can more suits in UB city and it could be the GCC is derived from the most complied planning strategies in other developed countries compared with most significant planning strategies in UB city.

• Journal of Bio-Environment Control
• /
• v.6 no.1
• /
• pp.43-47
• /
• 1997

This study was conducted to investigate the effects of various types of mulching materials for cutflower cultivation in statice. The results obtained were as follows ; The soil temperature mulched by black polyethylene film or rice straw was lower as 3$^{\circ}C$ than that of soil mulched by transparent polyethylene film or non - mulching in plastic house. The weed yield occurrenced on the soil mulched by black polyethylene film was lower than that mulched by transparent polyethyl one film and rice straw or non-mulching. The growth characteristics, those are plant height, leaf length and leaf width were not different among the mulching materials but in flower quality and yield of first grade, black polyethylene film produced better than others.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.26 no.5
• /
• pp.1211-1221
• /
• 2016

In IoT environment, making sure of trust of IoT devices is the most important one than others. The security threats of nowadays almost stay at exposure or tampering of information. However, if human life is strongly connected to the Internet by IoT devices, the security threats will probably target human directly. In case of devices, authentication is verified using the device-known private key. However, if attacker can modify the device physically, knowing the private key cannot be the evidence of trust any more. Thus, we need stronger verification method like code attestation. In this paper, we use software-based code attestation for efficiency. We also suggest secure code attestation method against copy of original code and implement it on embedded device and analyze its performance.