• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.1
• /
• pp.69-76
• /
• 2015

Bluetooth 4.0 is a low energy near communication technology. It is a suitable for Internet of Things(IoT), that is, all devices using small electric power consume are connected because power consumption is more lowing and brodening for application scope against bluetooh 3.0. Therefore in this paper, a present situation of beacon technologies are investigated and a design principle of restaurant advertisement and order system using beacon technology are presented. A beacon which is tranceiver based on bluetooth 4.0 technology and bluetooth 4.0 receiver device design is showed and design method of smart-phone interlocking these devices is presented. Also it shows that this design method is very useful for the Restaurant Advertisement & Order Commercial System production.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1724-1726
• /
• 2008

본 연구는 릴레이의 코일 접점 신호의 검출을 송신기에서 코일의 데이터를 검출하고 4-20mA데이터를 1/5,000까지의 분해능으로 환산하되 블루투스를 이용한 무선통신으로 전송할 수 있도록 하여 송신기의 각 코일에서 검출된 데이터 값을 인디케이터에 전송하고 다시 릴레이 코일 신호로 만들어 표시하고 제어하도록 한 것이다. 데이터의 전송은 1Port 에서 10 Port까지 릴레이 코일 및 4-20mA 물리량을 이용하여 검출대상의 접점 리액턴스를 각각 측정하여 블루투스를 이용한 무선통신 데이터 값을 송신하는 코일의 접점 송신수단과 상기 릴레이 접점 송신수단으로부터 전송된 데이터 값을 블루투스를 이용하여 무선통신으로 수신한 후, 상기 릴레이 접점에서 전송된 각각의 데이터 값과 전체 물리량으로 연산 처리된 데이터 값을 디스플레이 하고, 데이터의 디스플레이된 값을 통해 리액턴스 출력, 경보음출력, RS232, 4-20mA 출력이 발생되게 하는 인디케이터로 구성하는 블루투스를 이용한 10 Port 코일 리프트 제어 콘트롤러이다.

• Journal of Convergence Society for SMB
• /
• v.6 no.4
• /
• pp.25-30
• /
• 2016

This paper presents on the development of a compact anti-lost device requested recently. The proposed device consists of the master and slave modules based on Bluetooth4.1 technology. To implement a low-power characteristic, an algorithm has been also developed. The transmitting and receiving circuits are designed by using BoT CLE110 module supporting Bluetooth 4.1. The ATmega 328P-AU was used for the control and LP3874EMP was used as a linear regulator. Power consumption of the fabricated product in operating mode is only 10mAh and 35mAh for MCU operating state. Alarm operation distance is $10m{\pm}30%$, the effective radiated power is less than 10mW, the frequency band is designed to operate in the Bluetooth band with 26MHz bandwidth. And algorithms have been developed to extend the battery life. The size of the product was obtained as $45{\times}45{\times}15mm$ for master and $35{\times}35{\times}10mm$ fr slave. After the optimization process, it is expected to be commercialized as a wristwatch for anti-lost device.

• TTA Journal
• /
• s.68
• /
• pp.100-107
• /
• 2000

일상생활과 사무실에 거센 바람이 불고 있다. 그것은 근거리 무선접속규격의 신기술인 블루투스(Bluetooth)로서 우리의 모든 생활을 바꾸어 놓을 것이다. 인류의 역사를 바꾸는 신기술인 IMT-2000과 더불어 블루투스가 각광을 받고 있는 시점이다. 일상생활에서 특히 가정과 사무실에서 근거리 무선접속 구간에서의 이동성을 가진 디바이스들 간 상호통신의 새로운 표준으로 자리잡고 있다. 이와 같이, 일상생활에서의 커다란 변화와 산업 정보화시대에서 가장 큰 관건은 정보 고속화와 정보의 정확한 전달일 것이다. 이러한 것과 발맞추어 진행 중인 것이 근거리 무선구간에서의 2.4GHz대 ISM(Industrial, Scientific, Medical) 대역의 주파수를 사용하여 1Mbps 속도(실효속도 721K)로 최대 10m내에서 각종 단말기와 디바이스(예: 전화기, Fax, 데스크 탑, 노트북 컴퓨터, MP3 플레이어, 스캐너..)들을 무선 접속하는 블루투스 기술이며, 이는 기존의 유선에서의 불편함을 깔끔히 해소해 주었다. 필자는 전반적인 블루투스의 흐름을 간략하면서도 필요한 부분을 전달하는 목적으로, 또한 아직 블루투스의 위력을 인식하지 못한 기업과 독자들에게 새롭게 인식할 수 있도록 블루투스의 소개와 함께 기술적인 측면, 시스템적인 면과 회사별 제품현황에 대해 중요한 부분만을 블루투스 스팩을 기준으로 정리하였다.

• The Journal of the Korea Contents Association
• /
• v.4 no.1
• /
• pp.1-7
• /
• 2004

In addition to wired communication technology, wireless communication technology has been driving communication revolution nowadays. Bluetooth technology carries out data/voice communication making pico-net and the various application services are supported by access network connected to public network. This paper presents educational software development of bluetooth protocol stack including HCI, L2CAP, RFCOMM, SDP and profiles including GAP, SPP, GEOP, FTP. This software which supports programming environment of these protocol monitoring and emulation is implemented basically step by step for education based on H connected to the bluetooth device through RS-232-C, UART or USB cable. Application program coded by Visual C is operated over the firmware loaded on the bluetooth device connected to the PC. Additionally ftp and chatting function are developed to enhance educational efficiency.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2004.04a
• /
• pp.54-57
• /
• 2004

블루투스는 작은 크기와 저렴한 가격, 표준화된 프로토콜, 저전력 소모 등의 잇점으로 인해 로봇에 응용하기 적합한 무선 기술로 주목받고 있다. 그러나 단일 통신망을 구성하기 위해서는 1：7의 Master/slave 구조와 무선 통신거리 등의 제약사항이 있다. 블루투스를 로봇 시스템에 적용하기 위해서는 주위 환경에 따른 자기 조직화를 통해서 이러한 단점을 보완하고 주위 환경의 변화에 적절하게 대응을 할 수 있도록 하는 네트워크 구성 시스템이 필요하다. 자기 조직화를 하기 위해서는 Discovery, Organization, Maintenance, Reorganization의 크게 4단계의 과정을 거친다. 본 논문에서는 분산 로봇 시스템을 위해 트리구조를 이용한 자기 조직화 가능한 블루투스 네트워크를 구현하고 그 성능을 평가한다.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.4
• /
• pp.435-443
• /
• 2020

We analyzed whether the use of the Bluetooth salinity meter could affect the proper level of salinity in childcare centers. This study was conducted on childcare centers that wish to participate in the sodium reduction project (Bluetooth salinity meter using group, BG) and those that did not participate (Bluetooth salinity meter not using group, NG) among childcare centers registered with Center for Children's Foodservice Management in Anyang from January to December 2019. As a result of comparing the salinity and sodium contents of the soup according to whether or not a Bluetooth salinity meter was used, the salinity and sodium contents of BG was significantly lower than that of NG (p < 0.0001). Salinity and sodium contents in soups tended to decrease as the number of use of the Bluetooth salinity meter increased (p = 0.020). In conclusion, Bluetooth salinity meter can be used as a means to induce voluntary salinity control by cookers regarding sodium reduction education at childcare centers.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.1A
• /
• pp.34-40
• /
• 2003

Because that the wireless LAN and the Bluetooth which are currently used are operating at the ISM 2.4GHz, we must meet the frequency interference So performance degradation is occurred by frequency interference between the wireless LAN and the Bluetooth In this paper, for decreasing the errors between the communication systems because of the interferences, we analysis the influence of mutual interference between the local communication systems and the specification of frequency interference problem on the Bluetooth, the wireless LAN and home electronic products

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.4A
• /
• pp.411-417
• /
• 2008

This paper proposes BSFP (Bluetooth Scatternet Formation Protocol), which establishes a multi-hop bluetooth scatternet. BSFP independently operates on each bluetooth device, does not require any information on neighbor devices at the very beginning, and can establish a scatternet even though all the devices are spreaded beyond the bluetooth transmission range. BSFP is composed of the following three stages; 1) Init stage to investigate neighbor nodes, 2) Ready stage to establish a scatternet using gathered local information at each node, and 3) Complete stage to use the determined scatternet links. In BSFP, the scatternet formation time does not significantly affected by the number of bluetooth devices and a robust mobile ad hoc network is formed because BSFP formulates a scatternet with many adjacent links to neighbor devices.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.1 no.1
• /
• pp.87-93
• /
• 2006

This is paper, with the development of computer and network communications technology, the technology of digital computer and modern communications has integrated into the field of intelligent home appliances, making them intelligentize with the function of a network information terminal. The paper introduces the Bluetooth SIG(Special Interesting Group) and the development of the standard of the Bluetooth. Researches the application model and the practical application of the Bluetooth technology, and the component elements of the Bluetooth. Finally deals with the outlook for the development of the Bluetooth technology.