• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.4
• /
• pp.71-78
• /
• 2012

Recycled aggregates are made from construction wastes, and they have many national and social benefits by saving energy, developing substitute resources, and protecting environment. However, low-quality recycled aggregate with low density and high absorption rate cannot be used for structural concrete aggregate but is used mainly for low added value. Therefore, this study aims to identify the characteristics of the materials of recycled aggregates made after crashing and pulverizing waste concrete. For this, their major physical characteristics of cement content, absolute dry density, absorption rate, etc. were reviewed to make a mix design (draft) for the production of the secondary product and performance evaluation was done on the bending strength, absorption rate, bending strength after freezing and thawing, compressive strength, air-dried gravity, etc. of the test products produced by applying the mix design to compare the results with the quality standards of GR mark. The results of the tests showed that the substitution rate of recycled aggregate increased to 50~90 %, which is of superior quality than the performance standards of GR F 4007. Therefore, it is thought that they can be used for various construction works with certain physical characteristics applicable to the production of secondary concrete products using recycled aggregates.

• Korean Journal of Construction Engineering and Management
• /
• v.11 no.6
• /
• pp.111-121
• /
• 2010

As the customer's interest for sidewalk block in the street or apartment complex is increasing, the materials of block which had been a concrete block exclusively are varied to clay paver, native rock and wood etc. Especially, the sales volume of clay paver which is environment-friendly and ergonomic is dramatically increasing every year with two digits growth rate, however, many problems like "Edge Cracking" "Freezing Breakage" "Bending Breakage" "Joint Gap" are happening frequently within a couple of hours after installation due to the durabilities. Because of the characteristics of Ceramic products, clay pavers are very easy to be broken when they are bumped against each other. In addition, they are relatively fragile by a freezing expansion breakage when exposed to water due to hydrophilic property as well as the intensity and absorptance of the products are varied with small difference from the production process such as production equipment and process control. Therefore, it costs a lot of money to repair the breakdown unless production and installation is carried out according to the strict criteria of the quality control. In this study, the symptoms of breakdown frequently happened in clay paver are classified by each type and finally the solution for this problem in the production of brick, installation and criteria of quality control through compressive strength and absorptance test is suggested.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.06c
• /
• pp.274-276
• /
• 2006

e-seal은 RFID(Radio Frequency IDentification) 기술을 사용하여 원격에서 자동으로 봉인상태를 확인할 수 있는 컨테이너 봉인 장치를 말한다. RFID의 특징상 반도체 칩에 기록된 정보를 제 삼자가 쉽게 판독 및 변조할 수 있다는 취약점으로 인하여 활성화되지 못하고 있는 실정이다. ISO에서는 RFID의 취약점을 보안하기 위한 표준작업(ISO 18185)을 진행 중이다. 이 중, ISO 18185-4는 e-seal에 저장되는 자료나 리더와의 RF통신에서 데이터 보호를 위한 표준이다. 이와 관련된 연구로는 인증 프로토콜과 ISO 18185-4를 위한 보고서로 제출된 보안 프로토콜이 있다. 제안된 e-seal 보안 프로토콜을 적용하기 위해서는 e-seal과 리더 간의 데이터를 암/복호화할 키가 필요하지만, 키 서버를 통해 전달받은 마스터 키를 데이터 암/복호화 키로 바로 사용하는 것은 보안 상의 문제점을 야기할 수 있기 때문에 PRF(Pseudo Random Function)을 이용하여 마스터 키로부터 MTK(Mutual Transient Key)를 유도하고, MTK를 암/복호화 키로 사용해야 한다. 기존의 PRF는 일방향 해시 함수(MD5, SHA 등)를 기반으로 하는 HMAC[2. 3]을 일반적으로 사용하였다. 그러나 일방향 해시 함수는 e-seal과 같은 제한된 자원을 갖는 환경에 적합하지 않다. 따라서, 본 논문에서는 e-seal 보안 프로토콜을 위한 효율적인 PRF을 제안한다. 기존의 일방향 해시 함수 기반이 아닌 블록 암호화 알고리즘을 기반으로 하는 MAC을 이용하여 PRF을 보다 효율적으로 구현하였고, 블록 암호화 알고리즘은 AES를 선택 합성체 $GF((2^4)^2)$을 통해 하드웨어 모듈을 최적화 하였다. AES를 기반으로 하는 MAC은 HMAC에 비해 면적 및 처리율에서 뛰어난 결과를 보여주었다.<0.01).이상의 연구 결과, cook-chill생산 시 녹차 추출물의 첨가가 미생물적 품질유지에 효과가 있다고 사료되는 바 본 연구결과를 기초로 급식소에서 음식 생산 시 녹차 추출물 및 천연 항균성 물질 첨가에 따른 미생물적 품질 및 관능적 품질검사를 통한 레시피 개발에 관한 지속적인 연구가 수행되어야 하겠다.다.다리다보니 점심시간을 활용할 수 없게 되는 문제점에 대한 재검토가 필요하다. 따라서 차후 학교급식의 안전성 확보를 위한 급식환경 개선의 일환으로 식당공간 확보 시 신속한 시간 내에 급식이 가능하도록 넓은 공간과 쾌적한 환경의 식당 조성에 대해 관심을 기울여야 할 것으로 사료된다. 이상 여부를 반영하는 임상증상의 빈도가 높은 청소년기 남녀 중학생의 경우 아침과 저녁의 결식빈도 및 외식과 간식의 빈도가 높았고, 아침식사의 질과 체형만족도가 낮은 것으로 나타나 청소년의 건강과 식습관 및 체형만족도가 상호 관련성이 높은 것으로 나타났다. 따라서 본 연구 결과는 성장기 청소년의 건강 유지를 위하여 바람직한 식습관의 중요성을 재인식할 수 있었으며, 올바른 식습관 확립을 위한 영양교육의 중요성이 재확인되었다.경제적일 것으로 판단된다.er 90 % of good relative dynamic modulus of elasticity due to fineness of formation caused by the increase of the unit powder content and the improvement of flowability, without regard to the replacement of crushed stone fines. Therefore, it can be said that the usage of crushed stone fines can control the strength of super flowing concrete by replacement and re

• The Journal of the Korea Contents Association
• /
• v.11 no.1
• /
• pp.9-15
• /
• 2011

Zero-watermarking is a digital watermarking technique that can escape from data distortion and quality degradation by no watermark insertion into digital images to be watermarked. This paper proposes DCT0CRT, a CRT-based zero-watermarking technique in the domain of DCT. One of the DC and low-frequency AC coefficients of each DCT block chosen in chaotic way from an image is selected by testing whether it satisfies the CRT-based condition matching with the watermark bit to be embedded. Such selection information forms a key to extract the watermark from the watermarked image. Experimental results show that the image quality watermarked by DCT0CRT is better than that watermarked by any other CRT-based watermarking techniques and the inserted watermark is robust against some common attacks such as sharpening, blurring, and JPEG lossy compression.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.8
• /
• pp.1915-1925
• /
• 1998

The switching system software is large scale, real-time multi-task system which requires high reliability. The reliability assessment of large-scale software is very important for the success of software development project. For this raeson, the software quality measurement is much more important. In this paper, we have learned about the software reliability, metho of the analysis of failure data and estimation of software quality. To estimate the software reliability, using the failure data found during of the system test. We apply the two software reliability growth models, named Goel-Okumoto(G-O) and S-shaped model, to estimate the software reliability. Also, we compared with the results and we reviewed fully not only development cycle but validation and verification of the test data, for each software versions. This paper presents a software reliability model that suitale the software development project and the activeity of quality control for the switching system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.11C
• /
• pp.1510-1517
• /
• 2004

A new fingerprint image enhancement algorithm using multiresolution information and Gabor filter is proposed in this paper. The proposed algorithm performs selection of the region in image according to inclusion of singular points and then performs enhancement using Gabor filtering of the region adjusted in its size. Gabor filter using representative direction in the same block is used in the region that the direction of ridge is not changed much, while Gabor filter using pixel based direction is used in the region that the direction of ridge is changed much. This method can reduce processing time for enhancement using Gabor filter and preserve the merit of Gabor filter.

• Journal of Bio-Environment Control
• /
• v.23 no.2
• /
• pp.139-143
• /
• 2014

This study was conducted to investigate the effect of cultivation period and rockwool block size on the growth and early yield of paprika transplants grown in a closed transplant production system. Paprika seeds were sown and germinated in three different size of rockwool blocks ($45{\times}40{\times}35$, $70{\times}70{\times}60$, $100{\times}100{\times}65mm$) and cultivated in a closed transplant production system for 23, 30, and 37 days after sowing. Paprika transplants were cultivated using $100{\times}100{\times}65mm$ rockwool blocks in a greenhouse following a conventional and typical production method for comparing with the growth of paprika transplants grown in a closed transplant production system. Also, we transplanted paprika transplants grown for 23, 30, and 37 days in a closed transplant production system and greenhouse to rockwool slabs and investigated fresh weight of fruits and yield 125 days after sowing. The growth of paprika transplants grown in $70{\times}70{\times}60mm$ rockwool blocks in a closed transplant production system was highest, and the quality of paprika transplant grown in a closed transplant production system was better than in a greenhouse. Rockwool block size and cultivation period in a closed transplant production system did not affect fresh weight of fruits, however, yield was largest when paprika transplants were cultivated using $70{\times}70{\times}60$ and $100{\times}100{\times}65mm$ rockwool blocks for 23 days in a closed transplant production system. These results suggest that decreasing rockwool block size and cultivation period can be strategically used to enhance transplant quality and yield of paprika, as paprika transplants were cultivated in a closed transplant production system.

• The KIPS Transactions:PartB
• /
• v.17B no.6
• /
• pp.421-428
• /
• 2010

It takes a long time for the users to view a whole image from the image server under the low-bandwidth internet environments or in case of a big sized image. In this case, as there needs a technique that preferentially transfers a part of image, JPEG2000 offers a ROI(Region-of-Interest) coding. In ROI coding, the users see the thumbnail of image from the server and specifies some regions that they want to see first. And then if an information about the regions are informed to the server, the server preferentially transfers the regions of the image. The existing methods requested a huge time to compute the mask information, but this thesis approximately computes the regions and reduces the creating time of the ROI masks. If each code block is a mixed block which ROI and background are mixed, the proper boundary points should be acquired. Searching the edges of the block, getting the two points on the edge, to get the boundary point inside the code block, the method searches a mid point between the two edge points. The proposed method doesn't have a big difference compared to the existing methods in quality, but the processing time is more speedy than the ones.

• Journal of Broadcast Engineering
• /
• v.13 no.4
• /
• pp.427-439
• /
• 2008

This paper proposes a novel method to convert monoscopic soccer videos to stereoscopic videos. Through the soccer video analysis process, we detect shot boundaries and classify soccer frames into long shot or non-long shot. In the long shot case, the depth mapis generated relying on the size of the extracted ground region. For the non-long shot case, the shot is further partitioned into three types by considering the number of ground blocks and skin blocks which is obtained by a simple skin-color detection method. Then three different depth assignment methods are applied to each non-long shot types: 1) Depth estimation by object region extraction, 2) Foreground estimation by using the skin block and depth value computation by Gaussian function, and 3)the depth map generation for shots not containing the skin blocks. This depth assignment is followed by stereoscopic image generation. Subjective evaluation comparing generated depth maps and corresponding stereoscopic images indicate that the proposed algorithm can yield the sense of depth from a single view images.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.31 no.4
• /
• pp.731-751
• /
• 2021

The Internet of Things is a huge group of devices communicating each other and the interconnection of objects in the network is a basic requirement. Choosing a reliable device is critical because malicious devices can compromise networks and services. However, it is difficult to create a trust management model due to the mobility and resource constraints of IoT devices. For the centralized approach, there are issues of single point of failure and resource expansion and for the distributed approach, it allows to expand network without additional equipment by interconnecting each other, but it has limitations in data exchange and storage with limited resources and is difficult to ensure consistency. Recently, trust management models using fog nodes and blockchain have been proposed. However, blockchain has problems of low throughput and delay. Therefore, in this paper, a trust management model for selecting reliable devices in a fog-based IoT environment is proposed by applying IOTA, a blockchain technology for the Internet of Things. In this model, Directed Acyclic Graph-based ledger structure manages trust data without falsification and improves the low throughput and scalability problems of blockchain.