• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.38 no.6
• /
• pp.692-702
• /
• 2001

In this paper, a new block-matching algorithm for standard video encoder is proposed. The algorithm finds a motion vector using the increasing SAD transition curve for each predefined candidates, not a coarse-to-fine approach as a conventional method. To remove low-probability candidates at the early stage of accumulation, a dispersed accumulation matrix is also proposed. This matrix guarantees high-linearity to the SAD transition curve. Therefore, base on this method, we present a new fast block-matching algorithm with the slice competition technique. The Candidate Selection Step and the Candidate Competition Step makes an out-performance model that considerably reduces computational power and not to be trapped into local minima. The computational power is reduced by 10%~70% than that of the conventional BMAs. Regarding computational time, an 18%~35% reduction was achieved by the proposed algorithm. Finally, the average MAD is always low in various bit-streams. The results were also very similar to the MAD of the full search block-matching algorithm.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.18 no.1
• /
• pp.75-82
• /
• 2016

As spreading of train concrete ballast leads to the increase resounding friction noise, an porous sound absorbing block is applied in urban train tunnel as a counterparts against the friction noise. Three steps of major variables tests for an optimal mix design of the block are conducted to pursue the light weight of the block. Pilot property tests of the block for the cases of the fly-ash only as lightweight aggregates are carried satisfying KRT(Korean Rail Transit) and new KRS(Korean Railway Standards). Based on the results of pilot tests, required structural strength and admixture effects are evaluated. Additionally, typical lightweight aggregates are replaced so that lightweight and strength are improved for serviceability of poor working conditions and proper maintenance in urban train tunnel.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.26 no.5
• /
• pp.327-333
• /
• 2013

The purpose of this study is to predict sloshing pressure of a actual tank by using measured pressure in scaled down tank and to evaluate with structural strength of LNG Corner Block. For this purpose, we performed sloshing analysis about 138K class tank by using Ansys CFX program, and were measured both average pressure and maximum peak pressure according to scaled tank ratio. Also, measured pressure was converted to pressure of the actual tank by Froude scale law, and we conducted the evaluation of structural strength about the conner block of actual size KC-1.

• Journal of the Korean Society of Radiology
• /
• v.15 no.6
• /
• pp.813-819
• /
• 2021

In this study, the shielding rate of L-block-type shielding equipment used for radiation protection when radioactive fluorine is injected into the human body and the dose distribution of the space in the injection room were calculated using the Monte Carlo method. The shielding rate of the body and window parts of the L-block-type shielding equipment was 99.99%. The dose distribution calculated at a distance of 1 m was relatively high at 135°, 45°, 225°, 315°, and 180° of the XZ plane, and was calculated to be very low at 0°, 90°, and 270°. In the YZ plane, it was relatively high at 135°, 180°, and 225°, and was calculated very low at the remaining angles. The AZ and BZ planes also showed similar results to the YZ plane. In addition, it was confirmed that the shielding rate was the best in the range of 225° to 315° through the dose distribution in the horizontal direction of the source and the 45° direction above the source. These results can be used as basic data necessary for radiation protection of radiation workers.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.316-316
• /
• 2022

최근 기후변화로 인한 극한 강우의 발생빈도가 증가하고 있으며 IPCC는 제6차 기후변화 평가 보고서를 통해 아시아 지역에 이상 기온 현상이 발생하고 강수 변동성이 증가해 도시를 중심으로 홍수로 인한 도시 기반시설 피해가 발생하는 등 이상기후로 인한 자연재해가 증가할 것으로 예측하고 있다. 본 연구에서는 집중호우와 태풍으로 침수피해가 발생한 서울시 신림지역을 대상으로 대표적인 도시침수 해석모형인 XP-SWMM을 이용하여 저영향개발기법(LID)중 하나인 투수블럭의 적용성을 확인하고자 한다. 연구대상지역인 신림2배수구역은 상류에서 서울대배수구역에서의 유출량이 유입되며 하류에서 봉천천배수구역과 합류 후 신림1배수구역으로 유출되며 상류와 하류에서의 경계조건은 도림천 전 유역에 대해 수립된 도림천의 「도시하천 유역종합치수계획」 수립에 따른 유출분석 및 내수침수 해석결과를 적용하였다. XP-SWMM을 적용하여 내수침수를 해석한 결과, 투수블럭을 설치가능한 공간에 최대한 설치할 경우 피해면적에 대한 저감효과가 약 60%이상으로 나타나 불투수면적의 비율이 높은 도시지역에서 효과적인 침수저감 방법임이 확인되었다. 한편 본 연구에서 대상지역으로 선정한 연구지역에서 기왕 일최대강우에 대한 침수지역은 평균 침수심이 매우 얕고, 홍수량 또한 작은 규모이기 때문에 투수성블럭의 침수저감효과가 비교적 과도하게 평가되었다는 한계가 있으나, 빗물펌프장 등 구조적 침수대책이 수립된 후에도 일부 침수지역이 발생하는 소규모 침수지역에 대한 대책으로 투수성블럭이 유의미한 대책이 될 수 있을 것으로 사료된다.

• Journal of KIISE:Information Networking
• /
• v.28 no.4
• /
• pp.657-664
• /
• 2001

In our predecessor paper(Part I)[13], we introduced a graph that represents the crosstalk relationship among multicast connections in the photonic Banyan-type switching network, and found the upper bound on the degree of it. In this paper(Part II), we consider the number of routing rounds(i.e., scheduling length) required for SE(switching element)-disjoint multicasting in photonic Banyan-type switching networks. Unfortunately, the problem to find an optimal scheduling length is NP-complete thus, we propose an approximation algorithm that gives its scheduling length is always within double of the upper bound on the optimal length. We also study the scheduling length on the Iink-disjoint(i.e., nonblocking) multicasting. Various nonblocking Banyan-type multicasting networks are found under the scheduling lengths.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.9
• /
• pp.974-978
• /
• 2003

The down-converter of the WCDMA Digital Optic Repeater is developed. Based on the system specifications, the structure of the down-converter is accomplished and its block diagram is drawn. The down-converter is implemented according to these block diagrams. Subsequently a low pass filter, an automatic level controlled attenuator, a frequency synthesizer and other components for the down-converter are designed and implemented, and a main board to integrate these modules is also manufactured. To reduce the noise floor of system and suppress the RF spurious noise, a PCB layout is performed carefully. For each module consisting of the down-converter and the entire system, the performance tests are accomplished to check the performance about the specifications.

• The Transactions of the Korea Information Processing Society
• /
• v.1 no.1
• /
• pp.50-62
• /
• 1994

The majority of database users interact with database systems by manipulating forms. This paper discusses the fundamentals underlying forms and considers low these mechanisms affect the behavior of forms We then review the forms supported by commercial products. None of the packages reviewed provide all of the features that make up an ideal form. We propose a new design that overcomes many of the limitations observed in the packages currently available. The new system is event- driven, object-oriented, supports a hierachy of composite blocks, and is primarily modeless. Forms are defined as top-level blocks and blocks can be either atomic or composite structures with methods directly included in their definition. Messages are passed among form objects. Defining forms with the proposed system is simple because from definitions are similar to type declarations in Pascal.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2005.10a
• /
• pp.141-146
• /
• 2005

This paper an application example of PIV system for analyzing the flow of submerged structure. In this paper, we introduce an analysis method to predict the characteristics of flow around the neighboring fields of tetrapod and fishing reef in order to develop a high performance model. Flowing phenomenon according to velocity distribution and flow separation around the submersed body were obtained by PIV system. Flow visualization has conducted in a circulating water channel by a high speed camera and etc.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.115-115
• /
• 2016

최근 전세계적으로 발생하고 있는 이상기후 현상과 각종 개발 사업으로 인한 불투수면적의 증가로 극한 홍수의 발생빈도가 높아가고 있다. 특히 내수배제 불량으로 인한 도시지역의 침수로 매년 많은 인명과 재산상의 손실이 크게 증가하고 있으며, 홍수피해 저감 및 복구대책으로 많은 국비가 지원되고 있으나 아직까지 예방보다는 복구비에 치중하고 있는 실정이다. 국내에는 상습침수 위험지구가 점차적으로 증가하는 추세이며 이를 점진적으로 해소해나가기 위해서는 도시방재성능 목표 설정에서 목표강우량을 상향으로 설정할 필요가 있다고 본다. 이를 위하여 본 연구에서는 목표강우량을 상향 조정하여 침수해석을 실시하고 침수심을 기준으로 실제호우사상에 대한 침수심과 비교 검토하여 적정성을 확인하려고 한다. 또한 확률강우량의 시간분포는 도시별 유역 규모 및 유출특성, 강우강도 특성 등에 따라 상이한 결과를 보일 여지가 다분하여 실제 침수를 일으킨 강우와 가장 유사한 강우분포를 찾고자 한다. 기존 실무에서 주로 사용되는 Huff 분포와 함께 교호 블럭법, Huff와 교호블럭법을 혼합한 시간분포를 서울지역에 적용하여 대상지역에 적합한 시간분포를 선정하였다. 선정된 시간분포를 바탕으로 내수침수해석을 실시하여 그 결과인 침수심을 기준으로 상향된 목표강우량을 제시하고 도시지역의 적합한 설계강우의 시간분포를 도출하였다. 본 연구를 통해 도시지역의 적합한 강우 시간분포와 방재성능 목표를 설정하는데 기초자료를 제공할 수 있을 것으로 판단된다.