• Transactions of Materials Processing
• /
• v.24 no.1
• /
• pp.28-36
• /
• 2015

After a short review of the iterative optimal blank method, a new method of measuring the shape error for stamped parts with 3D contour lines, which is an essential component of the optimal blank design, is proposed. When the contour line of the target shape does not exist in a plane, but exists in 3D space, especially when the shape of the target contour line is very complicated as in the real automotive parts, then the measurement of the shape error is critical. In the current study, a method of shape error measurement based on the minimum distance is suggested as an evolution of the radius vector method. With the proposed method, the optimal blank shapes of real automotive parts were found and compared to the results of the radius vector method. From the current investigation the new method is found to resolve the issues with the radius vector method.

• Journal of the korean Society of Automotive Engineers
• /
• v.15 no.3
• /
• pp.96-110
• /
• 1993

A procedure has been developed so that a die-face for stamping automobile outer panels can be design and modelled efficiently. The procedure is composed of four parts each of which corresponds to modeling major components of a die-face, i.e. tipped product, blankholder, draw beads, and step draw. The modeling techniques developed specifically for die-face design enable a designer to generate the shape of a die-face quickly with the minimum input, and the resulting models can be used in FEM analysis and NC tool path generation. This will lead to the reductions in lead time and manhours required for the design and manufacture of the stamping dies.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.8
• /
• pp.174-182
• /
• 1998

This paper describes a research work of developing a computer-aided design and machining of irregular shaped-sheet metal product for blanking or piercing operation. An approach to the CAD/CAM system is based on the knowledge-based rules. Knowledge for the CAD/CAM system is formulated from plasticity theories, experimental results and the empirical knowledge of field experts. The system has been written in AutoLISP on the AutoCAD and in customer tool kit on the SmartCAM with a personal computer and is composed of nine modules, which are input and shape treatment, flat pattern-layout, production feasibility check, blank-layout, strip-layout, die-layout, data conversion, modelling, and post-processor module. Based on knowledge-based rules, the system is designed by considering several factors, such as material and thickness of product, complexities of blank geometry and punch profile, diameter and material of a wire, and availability of press. This system is capable of generating NC data automatically according to drawings of die-layout module. Results which are carried out in each module will provide efficiencies to the designer and the manufacturer of blanking or piercing die in this field.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.7
• /
• pp.721-727
• /
• 2015

The mechanical components for wind turbines are mainly manufactured using open-die forging. This research introduces an advanced forging method to produce the door frame of the tubular wind turbine tower. The advantages of this new forging method are an increase in the raw material utilization ratio and a reduction in energy cost. In the conventional method, the door frame is hot forged with a hydraulic press and amounts of material are machined out because of the shape difference between the forged and final machine products. The proposed forging method is composed of hot forging and ring rolling processes to increase the material utilization ratio. The effectiveness of this new forging method is deeply related to the ring rolled blank dimension before the final forging. To get the optimal ring rolled blank, forged shape prediction using the finite element analysis method was applied. The forged dimensions produced by the new forging method were verified through the first article production.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.5
• /
• pp.75-84
• /
• 2010

The aim of this paper is to design the blank shape of SPFH 590 high strength steel for stamping of the center hinge of automotive via numerical analyses and experiments for multi-stages transfer forming process. Three-dimensional elasto-plastic finite element analyses for the transfer forming process with six stages were performed using a commercial code AUTOFORM V4.2. The influence of the blank shape on the formability and the shape conformity were quantitatively examined through the FE analyses. From the results of the FE analysis, a feasible shape of the blank and the forming load were estimated. Stamping experiments were carried out using the proposed blank shape. The results of experiments were shown that the center hinge parts with the desired shapes can be manufactured successfully as the proposed blank shape is used. Through the comparison of the results of the experiments with those of the analyses, it was shown that the estimation of blank shape using the FE analysis is a proper methodology to create a feasible shape of the blank for the center hinge of automotive.

• Transactions of Materials Processing
• /
• v.21 no.3
• /
• pp.186-194
• /
• 2012

Hot stamping is a forming method that offers various advantages such as superior mechanical properties, good formability, and very small springback. However, relatively large-sized parts, such as front pillars, exhibit poor formability when hot stamped due to the limited material flow and thickness reduction imparted by the process. This reduction in thickness can also lead to cracks. One of the reasons is the relatively high friction between the sheet and the die. In this study, in order to obtain the optimal conditions for hot stamping of front pillars, various process parameters were studied and analyzed using the sheet forming software, J-STAMP. The effects of various parameters such as the die structure, blank shape, blank holding force, punch speed, clearance(upper and lower dies) and distance block were analyzed and compared.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.25 no.1
• /
• pp.74-81
• /
• 2017

The door impact beam of the side-impacted vehicle plays a key role in securing occupant safety by preventing intrusion from the impacting vehicle. Despite the low production cost, the press door impact beam has been adopted sparingly because of the strength inferiority. In this study, the design technologies of the press beam aimed at improving bending strength were investigated. First, the effect of the section shape and size was examined. Next, thickness and material strength were increased. Also, the TRB beam application was simulated by varying combined thickness. Some TRB beams with reduced weight exhibited bending strength over the strength of the pipe beam. Then, the beam with a closed center section also showed remarkably enhanced maximum bending strength.

• Transactions of Materials Processing
• /
• v.9 no.5
• /
• pp.469-477
• /
• 2000

Most of researches have been performed on the formability of axisymmetric shape, but it is insufficient that the study on Process variables of elliptical deep drawing Product. There are many Process variables exerted influence on the formability of products. Particularly, blank shape is more important than the others in elliptical deep drawing process. In this study, blanks of three types were proposed and compared using thickness distribution and movement of sheet during the process. The aim of a paper is to obtain optimal blank shape through experiment and finite element analysis(FEA).

• Transactions of Materials Processing
• /
• v.10 no.3
• /
• pp.235-245
• /
• 2001

Deep drawing process, one of sheet metal forming methods, is very useful in the industrial field because of its efficiency The deep drawing is affected by many process variables, such as blank shapes, shape radii of the punch and die, formability of materials and so on. Especially, blank shape is very important formability factor. In this study, in order to investigate the effects of blank shape, we suggested three kinds of blank shapes and examined friction test about three conditions. We measured punch load distribution according to punch stroke under the conditions of each punch and die shape radii and observed punch load of elliptical cup forming.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1992.10a
• /
• pp.68-72
• /
• 1992

자동차 및 각종 판재 성형시 성형율을 향상시키는 방법에는 신소재 개발, 금형기술개발, 접촉부의 마찰을 줄여 주기 위한 윤활 등등이 있겠으나 손쉽게 공구다이 상하에 비드를 설치하여 판재를 성형할 경우 미끄럼 저항의 균형을 이루어 주름 억제와 두께분포가 보다 균일해지며 스프링백 현상 등으로 인한 성형 후 치수 불량 등을 주어 판재성형율을 향상시키는데 기여할 수 있다. 본 연구에서는 펀치가 판재를 성형하기 위해 진행됨에 따라 공구다이와 펀치간의 접촉각도가 변하게 되는 점을 고려하여 인출 각도변화에 따른 인출특성 및 마찰계수 변화등을 알아보고자 하며 원형 형태의 환저비드, 단일원형비드, 이중원형 비드의 종류와 크기변화 및 비드좌우 모서리 변화, 공구다이모서리변화, 블랭크가압력 변화, 비드 전진깊이 변화, 비드통 과 후 재료의 기계적 성질 변화등 인출 특성에 영향을 미치는 인자들을 변화시켜나가며 이에 따르는 인출특성을 Data Bank화 시켜 비드 종류나 형상에 따른 금형설계의 기초자료를 제공하고자 한다.