• Journal of Pharmaceutical Investigation
• /
• 제22권2호
• /
• pp.125-131
• /
• 1992

The effects of domperidone, scopolamine butylbromide and cimetidine on the absorption and bioavailability of ciprofloxacin were studied in female rats. Ciprofloxacin was given in a single oral dose of 30 mg/kg to control group. Ciprofloxacin was concurrently administered with domperidone $(T_1\;group)$, scopolamine butylbromide $(T_2\;group)$, and cimetidine $(T_3\;group)$ to rats, respectively. Significantly changed pharmacokinetic parameters observed in $T_2$group when compared with control group were first-order absorption rate constant, $Ka(4.43{\pm}0.85$\;versus\;2.86{\pm}0.41\;hr^{-1},\;p<0.05)$, time needed to reach peak concentration, $T_{max}\;(32.27{\pm}2.46\;versus\;51.75{\pm}5.51\;min,\;p<0.05)$, area under the plasma concentration-time curve, AUC $(332{\pm}19\;versus\;477{\pm}27\;{\mu}g{\cdot}min/ml,\;p<0.05)$ and absolute bioavailability, Fabs $(60.6{\pm}3.6\;versus\;87.0{\pm}5.0%,\;p<0.05)$. On the other hand, domperidone and cimetidine did not significantly affect the absorption of ciprofloxacin. It is suggested that when scopolamine butylbromide is selected for clinical use, there is need for awareness of the reduction in absorption rate and the enhancement in absorption extent of ciprofloxacin.

• 보존과학연구
• /
• 통권34호
• /
• pp.84-99
• /
• 2013

전 세계적으로 분포하고 있는 약 2,900 종의 흰개미 중 23종의 흰개미가 일본에 서식하고 있으며, 이에 따라 1종의 흰개미만 분포하는 우리나라에 비해 더 심각한 피해를 주는 것으로 알려져 있다. 일본에서는 목조건축물에서 흰개미에 의한 피해가 발생하면 화학적 방제(훈증처리, 토양처리, 베이트처리 등)나 비화학적 방제방법(저산소처리, 이산화탄소처리, 고온처리, 저온처리 등)을 이용해 방제처리를 하게 된다. 특히, 훈증처리에 사용되는 메틸 브로마이드 훈증제의 생산과 소비를 2005년부터 전폐하기로 함에 따라 이를 대체하기 위한 다양한 방법들에 대한 검토가 이루어졌으며, 그 결과 실제로 피해 정도가 소규모이거나 장기간의 처리가 가능한 경우 등 일부 경우에는 약제를 사용하지 않는 비화학적 방법이 효과적이라는 것이 확인되었다.

• 폴리머
• /
• 제25권3호
• /
• pp.421-426
• /
• 2001

Montmorillonite (MMT)의 층간에 poly(${varepsilon}-caprolactone$) diol과 반응할 수 있는 -COOH기를 삽입하기 위하여 11-aminododecanoic acid를, 그리고 MMT의 층간거리를 넓혀주기 위하여 세칠트리메칠암모늄 브로마이드(CTMA)를 각각 삽입시켰다. 이렇게 개질된 MMT를 THF 용액상태에서 poly(${varepsilon}-caprolactone$) diol ($M_n{=2000}$)와 $80^{\circ}C$에서 4시간 동안 반응하였다. 반응 후, poly(${varepsilon}-caprolactone$) ($A_n{=80000}$)을 이 용액에 삽입하여 같은 온도에서 12시간 동안 혼합하였다. 이 용액을 실리콘 몰드에 부어 6$0^{\circ}C$ 진공 오븐에서 6시간 동안 건조하여 poly(${varepsilon}-caprolactone$) (PCL)/clay 나노복합재료 필름을 제조하였다. XRD와 TEM으로 확인한 결과 실리케이트 층이 완전히 박리된 박리형 나노복합재료임을 확인하였다. 그리고 MMT의 양에 따른 PCL/clay 나노복합재료의 기계적 성질과 열적 성질을 tensile tester와 DSC로 확인하였다. MMT가 PCL 매트릭스에 균일하게 분산되어 있어 복합재료의 영율이 향상되었으나, 인장강도에는 영향이 거의 없었다. 그리고 MMT의 양이 PCL에 대하여 3wt%까지 증가함에 따라 PCL의 결정화 온도가 증가하였다.

• 폴리머
• /
• 제24권2호
• /
• pp.228-236
• /
• 2000

알킬암모늄 브로마이드로부터 몬모릴로나이트 ($Na^{+}$-MMT)를 개질하여 2종류의 polyamic acid (BPDA-PPD, BTDA-ODA/MPD)를 삽입 후, 열이미드화 반응으로부터 폴리이미드/clay 나노복합재료를 제조하였다. 제조된 나노복합재료를 XRD로 관찰한 결과, 층간에 유기물질로 치환 되어 있는 MMT에 polyamic acid를 삽입하였을 경우 치환되어 있는 알킬 암모늄 양이온의 사슬 길이에 따라 MMT의 실리케이트의 층간거리가 증가하였다. 그리고 polyamic acid (PAA)가 삽입된 MMT를 승온하여 폴리이미드 복합재료를 제조한 결과 알킬 암모늄 양이온의 사슬길이와 PAA 종류에 상관없이 실리케이트의 층간 간격이 약 13.2 $\AA$이었으며, XRD와 TEM을 통하여 폴리이미드 매트릭스 내에 몬모릴로나이트의 실리케이트층이 규칙적으로 분산되어 있는 삽입형 (intercalated ) 나노복합재료임을 확인하였다. 그리고 복합재료의 열안정성을 TGA로 관찰 결과 폴리이미드 복합재료는 순수한 폴리이미드보다 열안정성이 약간 향상됨을 확인하였다. 그리고 동적 기계적 특성을 조사한 결과 나노복합재료가 폴리이미드보다 1.2~l.8배 저장탄성율이 증가됨을 확인하였다.

• 대한기계학회논문집B
• /
• 제22권4호
• /
• pp.489-498
• /
• 1998

Among the heat/mass exchange units composing an absorption system, the absorber, where the refrigerant vapor is absorbed into the liquid solution is the one least understood. In the present study, the effects of non-absorbable gas on the absorption process of aqueous lithium bromide solution falling film inside a vertical tube were experimentally investigated. In the range of film Reynolds number of 30 ~ 195, heat and mass transfer characteristics were investigated as a function of non-absorbable gas volumetric concentration, 0.2 ~ 20%. An increase of non-absorbable gas volumetric concentration degraded the mass transfer rate dramatically in the absorption process. The reduction of mass transfer rate was significant for the addition of small amount of non-absorbable gas to the pure vapor. At film Reynolds number of 130, an increase of non-absorbable gas concentration from 0.2 to 6.0% resulted in the decrease of mass transfer rate by 36% and 20% of non-absorbable gas by 59%. However the decrease of film Nusselt number with the increase of volumetric concentration of non absorbable gas was relatively smaller than the decrease of Sherwood number. Critical film Reynolds number was identified to exist for the maximum heat and mass transfer regardless of the volumetric concentration of non-absorbable gases.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.272-278
• /
• 2009

The characteristics of hybrid type absorption chiller are studied numerically to use a waste hot water effectively. In the case of the full load, the concentration and temperature of LiBr solution are increase about $11^{\circ}C$, 1.3% respectively at the single effect generator by hot water. As a result, the heat of the high temperature generator are decrease, so the energy can be saved. As the partial load decreased the consumption ratio of fuels are decreased and the reduction ratio of fuels are increased. The variation of COP with the inlet temperature of hot water is higher than that of the flow rate of hot water. The effect of mean temperature difference with solution and hot water of the generator are higher that of flow rate of hot water, it can effect on COP which is sensitive to heat of generator.

• 상하수도학회지
• /
• 제25권4호
• /
• pp.605-610
• /
• 2011

The objectives of this study are to investigate a bromate behaviour in the processes of advanced water treatment system (AWTS: preozonation, coagulator-settler, rapid sand filter, postozonation, biological activated carbon (BAC) beds) and to investigate the effects of ozonation, pH and ammonia nitrogen on bromate (${BrO^-}_3$) formation. As a result, $BrO_3$ was not detected in the processes of the AWTS without ozonation, while it was detected in a preozonated and postozonated water. For $BrO_3$ formation during June to November, the $BrO_3$ concentration of <9.4${\mu}g/L$ was observed in postozonated water, while it was reduced to about 46% by BAC beds. When applied ozone dosage and ozone contact time for influent with $Br^-$ of <0.3mg/L were 0.5-2.0mg/L.min and 10 min., $BrO_3$ concentration increased with increasing ozone dosage. Longer contact time and lower ozone level also was needed to inhibit the formation of $BrO_3$. At ozone dosage of 1.4 mg/L.min, the formation rate of $BrO_3$ increased with increase of pH value. When $NH_4-N$ concentration increased from 0.1mg/L to 0.4mg/L, $BrO_3$ concentration decreased to about 38%. These results revealed that $BrO_3$ concentration increased with increasing Br level, ozone dosage, and pH value, while it decreased with increase of $NH_4-N$ concentration.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.109-114
• /
• 2008

A dynamic model has been developed to simulate dynamic operation of a real double-effect absorption chiller. Dynamic behavior of working fluids in main components was modeled in first-order nonlinear differential equations based on heat and mass balances. Mass transport mechanisms among the main components were modeled by valve throttling, 'U' tube overflow and solution sub-cooling. The nonlinear dynamic equations coupled with the subroutines to calculate thermodynamic properties of working fluids were solved by a numerical method. The dynamic performance of the model was compared with the test data of a commercial medium chiller. The model showed a good agreement with the test data except for the first 5,000 seconds during which different flow rates of the weak solution caused some discrepancy. It was found that the chiller dynamics is governed by the inlet temperatures of the cooling water and the chilled water when the heat input to the chiller is relatively constant.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.304-308
• /
• 2008

The optimal design of two stage evaporation & absorption system which is related to the large temperature difference system was investigated numerically in the absorption refrigeration system. The concentrations at inlet & oulet of absorber are 62.9% and 56.9%, but in two stage absorption system the values are 62.2% and 56.2%. Therefore strong solution & weak solution became diluted than the standard value. The amount of weak solution circulation can be reduced in absorption refrigeration system, and the sensible heat load is more reduced to enhance the COP of system. As UAR is increased, COP becomes larger, and this means the role of top section is more important than bottom section in two stage evaporation & absorption system. But the increase of COP becomes slower at 0.7 of UAR ratio. The performance of Type2 is higher than Type1 in COP with the flow direction of cooling waters. This phenomena is due to the active absorption of vapor -absorption & lower temp. cooling water is more effective. The pressure at bottom section becomes higher & that at top section becomes lower and therefore the circulation rate can be diminished more.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.130-135
• /
• 2008

The objectives of this study are to investigate the combined heat and mass transfer enhancement using binary nanofluids as the working fluids in a $H_2O$/LiBr absorber. The result of heat and mass transfer experiment with the additives(Arabicgum, 2E1H) showed that the heat and mass transfer performance of binary nanofluid with 2E1H enhanced significantly in comparison with that without additive. In the case of 0.01wt% $Al_2O_3$ binary nanofluids with 2E1H, the vapor absorption rate increased up to 77% in comparison with that without additive. The heat transfer rate of 0.01wt% $Al_2O_3$ binary nanofluids with 2E1H increased up to 19%. Based on the experimental results, it is recommended that the $Al_2O_3$ binary nanofluid be good with 2E1H to improve the heat and mass transfer performance.