• Journal of Korean Society of Disaster and Security
• /
• 제17권2호
• /
• pp.1-11
• /
• 2024

Most reservoirs in South Korea are earthen dams, mainly because they are cost-effective and easy to construct. However, earthen dams are highly vulnerable to seepage and overtopping, making them prone to sudden failure during excessive flooding. Such sudden failures can lead to a rapid increase in flood discharge, causing significant damage to downstream rivers and inhabited areas. This study investigates the effect of riprap placement on the slopes of earthen dams in delaying dam failure. Delaying the failure time is crucial as it allows more time for evacuation, significantly reducing potential casualties, which is essential from a disaster response perspective. Hydraulic experiments were conducted in a straight channel, using two different sizes of riprap for protection. Unlike previous studies, these experiments were performed under unsteady flow conditions to reflect the impact of rising water levels inside the dam. The target dam for the study was a cofferdam installed in a diversion tunnel. Experimental results indicated that the presence of riprap protection effectively prevented slope failure under the tested conditions. Without riprap protection, increasing the size of the riprap delayed the failure time. This delay can reduce peak discharge, mitigating damage downstream of the dam. Furthermore, these findings can serve as critical reference material for establishing emergency action plans (EAP) for reservoir failure.

• Journal of the Korean Geotechnical Society
• /
• 제30권11호
• /
• pp.25-37
• /
• 2014

Clay or sand does not exist alone but various sizes of soil are mixed in the field. In this study, the effect of water content on large deformation of such mixed soils is studied by using soil column tests and a particle method. A soil column with 7 cm in diameter and 13 cm in height, which was made out of kaolinite with sand content of 0, 10, 25, or 50%, was tested for large deformation. Its deformation was monitored with time. While increasing its water content from 40, 60, to 80%, a total of 12 types of soil column tests were carried out. The particle method simulated their deformation with time. A maximum plastic shear modulus, which was a function of undrained shear strength and plasticity index for soils with different water contents, was associated with soil viscosity to simulate large deformation of soil column. When a sand content of soil column was constant, the deformation of soil column increased with increasing water content. When a water content of soil column was constant, large deformation occurred with increasing the sand content. The maximum deformation, which was 22 cm in diameter, was observed in the case of water content of 80% and sand content of 50%. The particle method was able to relatively well simulate such large deformation and stress change of soils.

• Proceedings of the Korean Vacuum Society Conference
• /
• 한국진공학회 1998년도 제14회 학술발표회 논문개요집
• /
• pp.113-113
• /
• 1998

C CdTe와 HgCdTe는 광전소자나 태양전지,x 선 및 y 선 감지 소자 그리고 적외선 감지소 자로의 웅용둥으로 인하여 많은 연구가 진행되고 있다. 광전소자를 제작함에 있어서 깊은 준위나 얄은 준위에 있는 몇들은 운반자 수명에 매우 큰 영향을 미치고 있음에도 불구하고 광전도도 측정에 의한 운반자 수명 연구에 대하여는 보고된 것이 별로 없다. 이에 본 논문에서는 CdTe 시료의 광전도도를 측정하여 운반자 수명 및 깊은 준위의 위치를 알아보았다 M MBE방법을 이용하여 CdTe 기판위에 In을 도핑한 CdTe를 성장하였다. 광전도 붕괴(PCD) 측정은 300 K에서부터 400 K까지 온도를 변화시켜주면서 측정을 하였고 광원으로서 G GaP- LED를 사용하였으며 전압 신호를 읽기 위하여 Tektronix 2430A 오실로스코프를 이용하 였다 .. Fig. 1. 에서 보인바와 같이 광전도 붕괴곡선은 접선으로 나타낸 하나의 지수 함수적 붕 괴(a2exp( -t/ r 2))보다는 설선으로 나타낸 두 개의 지수함수적 붕괴(alexp( νr 1)+a2exp( -νr 2)) 가 더욱 잘 실험결과와 일치함을 알 수 있었다. 이러한 것은 과잉 전하에 대한 깊은준위를 가 지고 있는 반도체물질에서 일반적으로 관찰되는 것으로 시료가 n 형이기 때문에 소수 운반자 인 정공의 벚에 의한 것으로 생각된다 .. Fig. 2. 에서는 운반자 수명의 온도에 대한 변화를 나타 낸 것이다. 온도가 증가함에 따라 운반자 수명이 감소하는 경항올 보이고 있으며 이것올 이용 하여 딪익 활성화 에너지를 계산 하여 본 결과 0.35 eV 와 0.43 eV염을 알수 있었다.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 한국전산구조공학회 2011년도 정기 학술대회
• /
• pp.602-605
• /
• 2011

본 논문에서는 마찰감쇠기가 설치된 건물이 붕괴하중을 받을 때의 에너지소산능력을 고려하여 등가감쇠비를 유도하였다. 마찰감쇠기는 주로 지진과 같은 수평하중에 대한 에너지를 소산하기위해 설치된다. 마찰감쇠기를 대각 가새형으로 설치하면 수평하중에 대한 저항력뿐 만아니라 수직하중에 대한 저항성능도 발휘된다. 건물에 설치된 마찰감쇠기는 외력의 크기에 따라 정지와 운동의 상태를 반복하여 외부 입력에너지를 소산시키기 때문에 외력과 응답관계가 비선형이다. 건물은 고유의 점성감쇠를 가지므로 마찰감쇠기가 설치된 건물은 마찰과 점성감쇠를 동시에 고려해야하므로 해석적인 정해를 구하기가 어렵다. 에너지 평형을 이용하여 등가감쇠비를 구하고 운동방정식을 등가선형화하면 쉽게 저항 성능을 파악할 수 있다. 우선 건물에 영향을 미치는 것은 감쇠이므로 감쇠의 영향력을 마찰력비, ${\gamma}_c$로 나타내었다. 둘째, 정해를 마찰력비로 표현하여 유도하고 응답특성을 파악하였다. 셋째, 에너지 균형식을 통해 등가감쇠비를 산정하였다. 마지막으로 등가감쇠비를 검증하기 위하여 등가감쇠비를 이용하여 등가선형화한 응답과 실제 마찰감쇠기를 설치하여 비선형 수치해석한 결과와 비교, 검증하였다.

• KOMUNHWA
• /
• 59호
• /
• pp.35-63
• /
• 2002

Yungsan River(榮山江) valley developed into a political structure, which centers around the Bannam(潘南) until the 5th century, when the group cemetery prevailed. However, it's solidarity was sustained at a rather loose stage. And around the end of the 5th cen

• Proceedings of the Korea Water Resources Association Conference
• /
• 한국수자원학회 2023년도 학술발표회
• /
• pp.222-222
• /
• 2023

오픈 소스 유체역학 소프트웨어인 OpenFOAM은 다양한 유체 흐름에 적용 가능한 프로그램들로 구성되어 있다. 이 중 interFoam은 밀도가 다른 두 유체(i.e., 물, 공기) 간의 경계를 추적하는 기법을 기반으로 한 프로그램으로, 파랑의 거동 모의에 주로 쓰이고 있다. 파생형 프로그램으로는 동격자(dynamic mesh) 및 중첩 격자 기법(overset grid method)을 interFoam에 추가한 overInterDyMFoam이 있다. 두 기법을 사용하면 각각 여러 영역에서 유체흐름과 다중 물체 간의 상호작용을 효율적으로 모의할 수 있다. 본 연구에서는 overInterDyMFoam을 사용하여 두 개 수문의 개방 움직임을 구현하고 생성된 파랑이 포말대(swash zone)에 접근하였을 때의 흐름 특성을 조사하였다. 수치모형실험 결과 수문 개방 속도가 댐 붕괴 파랑 흐름 전파속도에 영향을 미치는 사실을 발견하였다. 또한, 처오름과 처내림의 상호작용에 의한 난류 운동 특성을 조사하기 위해 수문 개방시간 간격을 0초~3초로 설정하였다. 수치모형실험 결과는 수리모형실험의 수면 변동 시계열과 속도 시계열 결과와 비교하여 모형의 정확성이 검증되었다.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• 제30권3호
• /
• pp.320-325
• /
• 1985

Relation between amylose and physical properties of milled rice was investigated. Amylose content was negatively and positively correlated with chalkiness and alkali solubility, respectively. No correlation was observed between amylose content and water uptake rate, cooked rice hardness or relative crystallinity. Relative crystallinity of the starch was negatively correlated with alkali solubility and water uptake rate.

• Journal of Korean Society of Disaster and Security
• /
• 제11권1호
• /
• pp.31-38
• /
• 2018

The 99.1% of small dam and most of the levees in Korea are soil dam which can be constructed with lower cost and less effort compared with ones made of concrete. However, they are so vulnerable to overflow. Sudden collapses of these strucrues lead to increase flow rate rapidly, which may cause catastrophic problems in downstream regions. In this study, the experimental study on the collapse delay effect of riprap that was laid on slope of soil levee was carried out. A prismatic rectangular open channel was used and three different sizes of the riprap were installed on slope of a scaled earth dam. A new formula for the collapse time of the levee with the installation of riprap was presented, using the previous researches and the dimensional analysis. In this process, an unsteady flow condition was considered to derive the deviation time of the riprap. And additional experiments were conducted to understand the effect of reinforcement of riprap, and it was found that the reinforcement of riprap was more effective than twice sizing of intial riprap. If the collapse time is delayed, EAP (Emergency Action Plan) and forecasting can greatly reduce the degree of flood damage. Also, it will be meaningful that the results of this study are used for river design.

• Journal of Korean Society of Forest Science
• /
• 제83권2호
• /
• pp.175-190
• /
• 1994

In order to get fundamental information for prediction of landslide hazard, both forest and site factors affecting slope stability were investigated in many areas of active landslides. Twelve descriptors were identified and quantified to develop the prediction model by multivariate statistical analysis. The main results obtained could be summarized as follows : The main factors influencing a large scale of landslide were shown in order of precipitation, age group of forest trees, altitude, soil texture, slope gradient, position of slope, vegetation, stream order, vertical slope, bed rock, soil depth and aspect. According to partial correlation coefficient, it was shown in order of age group of forest trees, precipitation, soil texture, bed rock, slope gradient, position of slope, altitude, vertical slope, stream order, vegetation, soil depth and aspect. The main factors influencing a landslide occurrence were shown in order of age group of forest trees, altitude, soil texture, slope gradient, precipitation, vertical slope, stream order, bed rock and soil depth. Two prediction models were developed by magnitude and frequency of landslide. Particularly, a prediction method by magnitude of landslide was changed the score for the convenience of use. If the total store of the various factors mark over 9.1636, it is evaluated as a very dangerous area. The mean score of landslide and non-landslide group was 0.1977 and -0.1977, and variance was 0.1100 and 0.1250, respectively. The boundary value between the two groups related to slope stability was -0.02, and its predicted rate of discrimination was 73%. In the score range of the degree of landslide hazard based on the boundary value of discrimination, class A was 0.3132 over, class B was 0.3132 to -0.1050, class C was -0.1050 to -0.4196, class D was -0.4195 below. The rank of landslide hazard could be divided into classes A, B, C and D by the boundary value. In the number of slope, class A was 68, class B was 115, class C was 65, and class D was 52. The rate of landslide occurrence in class A and class B was shown at the hige prediction of 83%. Therefore, dangerous areas selected by the prediction method of landslide could be mapped for land-use planning and criterion of disaster district. And also, it could be applied to an administration index for disaster prevention.

• Journal of the Korean Society of Marine Environment & Safety
• /
• 제17권3호
• /
• pp.295-300
• /
• 2011

Ship are a box-shaped structure. It is used often fore and aft parts, bilge strake, deck with camber of ship structures. When this structure is compared with flat plate structure, it different to behaviour. Generally, if it subjected to axial compressive load, ultimate strength depend on the change of curvature. Also, In this paper, stiffened curved plate with 1/2+1+1/2 bay model subjected to compressive load carried out the elasto-plastic large deflection series analysis. and parameter effect considered slender ratio, web height/thickness as well as change of curvature and investigated collapse mode for analysis model.