• Title/Summary/Keyword: 불 전파

Search Result 70, Processing Time 0.025 seconds

A study on the transmission efficiency of electromagnetic wave propagation in cross type tunnels in time domain (시간영역에서 십자형 터널 내의 전파 전파의 전송 효율에 관한연구)

  • ;Kazunori UCHIDA;Kiyotoshi YASUMOTO
    • Journal of the Korean Institute of Telematics and Electronics D
    • /
    • v.34D no.4
    • /
    • pp.1-7
    • /
    • 1997
  • This paper presents an analysis of the wave propagation in cross-type tunnels using the finite volume time domain (FVTD) method. Because the FVTD method is based on the volume intergrations of themaxwell's equations with respected to arbitrary shaped small polyhedron cells and the fields at every center point of the cells ar eassigned in a average fashion, the method can handle arbitrary boundary problems with inhomogeneous media. In this paper, the wave propagation in cross-type tunnels has been analyzed using the fVTD method with the PML (perfectly matched layer) absorbing bundary conditons, and the numerical results are verified with a set of experimental data.

  • PDF

Solute Transport Modeling using Streamline Simulation in a Heterogeneous Aquifer with Multiple Contaminant Sources (불균질 대수층에서 유선 시뮬레이션을 이용한 다수 오염원의 용질 이동 모사)

  • Jung Seung-Pil;Choe Jong-Geun
    • Journal of Soil and Groundwater Environment
    • /
    • v.10 no.3
    • /
    • pp.24-31
    • /
    • 2005
  • This study presents a contaminant transport model suitable for a 2-dimensional heterogeneous aquifer with multiple contaminant sources. It uses a streamline simulation, which transforms a multi-dimensional problem into multiple 1dimensional problems. It runs flow simulation, streamline tracking, and calculation of contaminant concentrations by turns. The model is verificated with a Visual MODFLOW by comparing contaminant concentration distributions and breakthrough curves at an observation well. Due to its fast simulation, it can be applied to time consuming simulations such as in a fine-grided aquifer, an inverse modeling and other applications.

A Numerical Study on the Rock Fragmentation by TBM Cutter Penetration (TBM 커터 관입에 의한 암석 파쇄의 수치해석적 연구)

  • 백승한;문현구
    • Tunnel and Underground Space
    • /
    • v.13 no.6
    • /
    • pp.444-454
    • /
    • 2003
  • Rock fragmentation technique by cutter penetration has widely been used in the mechanical tunnel excavation. Microcracks propagate and interact because of locally concentrated high stress induced by cutter penetration. which is caused by heterogeneity of rocks. In this study Weibull distribution function and degradation index are used to consider the strength heterogeneity of a rock and the degradation of rock properties after failure. Through the numerical analyses, it is shown that the lateral pressure has an important influence on the rock fragmentation. In the single cutter penetration, large chips are formed as lateral pressure increase. The cutter spacing is also an important factor that affects the rock fragmentation in the double cutter penetration. The fragmentation efficiency of the double cutter penetration is better when cutter spacing is 70 mm than 40 mm and 100 mm. From the results, it is expected that this study can be applied to a TBM tunnel design by understanding of chipping process and mechanism of rock due to cutter penetration.

Fabrication and Evaluation of Broad-Band Ferrite EM-wave Absorber (광대역 페라이트 전파흡수체의 제작과 평가에 관한 연구)

  • 손준영;배재영;원영수;송재만;김동일
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2001.05a
    • /
    • pp.244-248
    • /
    • 2001
  • According to the progress of the electronic industry and radio communication technologies, mankind might enjoy its abundant life. On the other hand, many social problems such as EMI, and unnecessary electromagnetic wave occur due to the increased use of electromagnetic wave. Therefore, the organizations such as CISPR, FCC, ANSI, etc. have provided the standard of electromagnetic wave environment for the countermeasure of the EMC. It had been required that the absorbing ability of an electromagnetic wave absorber is more than 20dB, the bandwidth of which is required through 30 MHz to 1,000 MHz for satisfying the international standard about an anechoic chamber for EMI/EMS measurement. From November of 1998, however, the CISPR11 has accepted the extended frequency band from 1 GHz to 18 GHz additionally in the bandwidth of EMI measurement[1]. In this paper, we proposed a new type absorber satisfying the above requirements and carried out broadband design using the equivalent material constants method. Futhermore, the experiments were carried out over the frequency band from 30 MHz to 2 GHz, and hence, the validity of the proposed design theory was confirmed.

  • PDF

화장실 양변기 배수 및 세정소음

  • 박명식;김태희
    • The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
    • /
    • v.32 no.10
    • /
    • pp.17-21
    • /
    • 2003
  • 국내 화장실 양변기의 배수 및 세정소음에 관한 실험실 측정결과를 소개하고자 한다. 1989년 대한주택공사에서 조사한 설문조사에 의하면 공동주택에서 외부로부터 들리는 소음에 대한 불만을 조사한 결과, 바닥충격음, 급배수설비 소음, 그리고, 공기전달음의 순으로 나타났다. 이와 같이 급배수시 발생소음은 공동주택 입주자의 주요한 민원중의 하나이다. 급배수설비 소음은 유체의 유동에 의하여 발생하며, 직접 공기중을 전파하여 가는 “공기전달음”과 배관지지 재료 및 구조체 등을 통해 재차 공기중을 전파하여가는 “고체전달음” 으로 구분된다. 여기서 “공기전달음”이란 실내에서 발생한 소리가 구조체를 진동하고 구조체는 인접실의 구조체 주변의 공기를 진동하여 소리가 방사되거나 또는 인접실간에 열려 있는 통로를 거쳐 전달되는 소음을 말하고 “고체전달음”이란 음원이 접하고 있는 건물구조체를 통하여 진동의 형태로 전달되는 소음을 일컫는다. 공동주택에서 배수관은 아래층 천장배관에 해당되므로 배수관에서 발생하는 소음은 아래층으로 직접 전달된다. 이러한 배수설비 소음은 배관재의 종류, 배관스페이스의 구조 및 위치 등에 따라 소음레벨이 달라지게 된다.(중략)

  • PDF

A Study on the Technical Regulation for Spurious Emission of Weak Field Strength Radio Receiver (소출력 무선 수신기의 부차적 전파발사 규정에 관한 연구)

  • Kim, Sun-Yeob;Park, Hyoung-Keun
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.13 no.2
    • /
    • pp.790-794
    • /
    • 2012
  • A output strength is limited according to the frequency used in order to protect other wireless stations from interference caused by radio waves emitted from the low power wireless installations. For receivers, unwanted spurious emission is regulated, and regulations in Korea define that additional spurious emission for receivers in the low power wireless installations under 1GHz should be -54dBm, but no regulations have been established yet for low power wireless installations over 1GHz. It is presently required to set domestic standards for devices over 1GHz on account of the expansion of the communication market and its service.

정보통신안테나

  • Korean Associaton of Information & Telecommunication
    • 정보화사회
    • /
    • s.20
    • /
    • pp.56-69
    • /
    • 1989
  • 정보문화의 달이기도 했던 6월은 고도정보화사회를 앞당기는 일련의 획기적인 조치들이 취해져 관련업계의 관심을 크게 집중시키고 있다. 정부는 정보통신회선 사용상의 제한을 대폭 완화하여 민간기업이 실질적으로 VAN사업에 참여할 수 있는 길을 열어놨고 종래 규제일변도였던 전파정책을 권장행정으로 전환하는 전파관리법도 입법예고했다. 정부가 마련한 정보통신회선사용제도 개선조치는 DB, DP만 제공할 수 있도록 되어있는 정보통신역무제공업자의 사업범위를 불특정다수인을 대상으로 한 정보교환 및 타인통신매개행위를 허용했고 지금까지 9600bps급 이하의 저속회선에서만 접속이 허용되어온 다중화장치(MUX)의 사용범위를 대폭확대하여 64kbps급 이상의 고속회선에서도 접속사용할 수 있도록 허용했다. 또한 그룹 VAN의 경우에도 업무상 긴밀한 관계자 등만 이용할 수 있게 한 제한사항도 폐지해 국내 VAN시장에 대한 민간기업의 참여를 전면적으로 허용했다. 이외에도 정보통신역무제공업자가 DP.DB제공을 위해 필요한 경우 컴퓨터 본체에서의 부수적인 정보교환행위를 허용하여 DB내용 갱신(up-data) 등을 위한 중도컴퓨터의 접속도 가능토록 했다. 그런데 그룹 VAN의 경우 이용대상의 제한을 없앴으나 그룹망 중 타인사용특례를 받은 업체 이외의 망에는 이용자가 접속할 수 없도록 되어있기 때문에 각 업체에서는 시스템 통합화를 추진할 확률이 높다. 또한 고속회선에 대한 다중화장치(MUX) 사용을 허용하고 있으나 개방에 대비해 각 업체에서 이미 보유하고 있는 노드 프로세서(Node Processor)를 전용교환기로 간주, 이의 사용을 제한하고 있는 실정이다. 업계에서는 중도컴퓨터의 접속은 허용하고 있으면서 통신과 컴퓨터의 중간자적 기능을 갖고 있는 노드프로세서의 사용을제한한다는 데에 있어서는 의견을 달리하고 있다. 우리 협회에서는 이달 법제위원회를 개최하여 이번 조치에 대한 검토와 함께 전파관리법 입법예고안에 대한 업계의 의견을 수렴, 정부에 건의할 예정이다.

  • PDF

A Study on Additional spurious emission for receivers in the Low Power Wireless Installations (소출력 무선기기의 부차적 전파발사에 관한 연구)

  • Kim, Sun-Youb;Ra, Yoo-Char
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2009.10a
    • /
    • pp.963-965
    • /
    • 2009
  • For the low power wireless installations, limited frequency resources are divided by use for their effective use and are assigned. Moreover, output strength is limited according to the frequency used in order to protect other wireless stations from interference caused by radio waves emitted from the low power wireless installations. For receivers, unwanted spurious emission is regulated, and regulations in Korea define that additional spurious emission for receivers in the low power wireless installations under 1GHz should be -54dBm, but no regulations have been established yet for low power wireless installations over 1GHz. It is presently required to set domestic standards for devices over 1GHz on account of the expansion of the communication market and its service.

  • PDF

APT 현황과 신종 악성코드 대응방안

  • Im, Sul-Hwa;Kim, Jong-Soo;Yang, Jun-Keun;Lim, Chae-Ho
    • Review of KIISC
    • /
    • v.24 no.2
    • /
    • pp.63-72
    • /
    • 2014
  • APT란 백신에서 탐지를 못하는 신종 악성코드로서 1 비트만 바뀌어도 탐지를 할 수 없는 안티 바이러스 제품의 오용탐지 기반, 즉 알려진 위협의 증거값(Signature)이 있어야만 탐지하는 구조에 기인한다. 일부에서 APT를 이메일에 첨부된 신종 악성코드라고 이야기하고 있으나 이는 APT의 전파 방법 중 하나일 뿐이고 올해 발생한 3.20 사이버 테러에서 알 수 있듯이 웹을 통한 불특정 다수를 목표로 한 신종 악성코드의 무차별 감염이 심각한 상태이다. 따라서 본 논문에서는 그동안의 사례를 분석하고 APT에 대응하기 위한 방안에 대해 살펴보고자 한다.

A Study on the Evaluating Characteristics of EM Wave Absorber for Noise Suppression from PCB (PCB상의 노이즈 제거용 전파흡수체의 특성 평가에 관한 연구)

  • Kim, Dong-Il;Choi, Dong-Soo;Yoon, Sang-Gil;Yoo, Gun-Suk
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.20 no.6
    • /
    • pp.509-515
    • /
    • 2009
  • In this paper, we analyzed and evaluated noise suppression characteristic of EM wave absorber. We fabricated several absorber samples in different ratios of Sendust and Amorphous with CPE(Chlorinated Ploy-ethylene) as binder and calculated material constants by measured S-parameter. Then, we confirmed that the noise suppression characteristic of EM wave absorbers using microstrip line. A microstrip line with EM wave absorber placed on its top was used to evaluate the conduction noise suppression. As a result, noise suppression effect show different charateristic by changing relative permeability. Therefore, EM wave absorber using Sendust show excellent characteristic. In particular the maximum power absorption over 90 % in 1.7 GHz to over 6 GHz has obtained when composition of Sendust:CPE=80:20wt.%.