• Analytical Science and Technology
• /
• v.13 no.2
• /
• pp.1019-1026
• /
• 2000

• Analytical Science and Technology
• /
• v.13 no.4
• /
• pp.1057-1069
• /
• 2000

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2003.05a
• /
• pp.123-126
• /
• 2003

The uncertainties generated by measurement parameters are propagated to the uncertainty of total-to-total efficiency on an experiment. The effect of uncertainties’ propagation are analyzed through a turbine performance test. A tested 3-D axial type turbine has a 0.373 degree of reaction at the mean radius and the performance test is conducted at the low pressure and cold temperature status. The uncertainty of turbine inlet and exit total pressure shows the strong propagation effect to the uncertainty of total-to-total efficiency. This means that a high precision pressure measuring system is required to reduce the uncertainty propagated by the pressure. In the uncertainty portion of each measurement parameters to the uncertainty of total-to-total efficiency, the uncertainty by torque is the highest and the uncertainty by RPM is the lowest. In case of the total pressure, the effect of the uncertainty by torque is increased with the increasing RPM. The uncertainty of total pressure at the turbine exit shows more influence to the results than that at the turbine.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.7
• /
• pp.647-656
• /
• 2014

To supplement the ISO-GUM method for the evaluation of measurement uncertainty, a simulation program using the Monte Carlo method (MCM) was developed, and the MCM and GUM methods were compared. The results are as follows: (1) Even under a non-normal probability distribution of the measurand, MCM provides an accurate coverage interval; (2) Even if a probability distribution that emerged from combining a few non-normal distributions looks as normal, there are cases in which the actual distribution is not normal and the non-normality can be determined by the probability distribution of the combined variance; and (3) If type-A standard uncertainties are involved in the evaluation of measurement uncertainty, GUM generally offers an under-valued coverage interval. However, this problem can be solved by the Bayesian evaluation of type-A standard uncertainty. In this case, the effective degree of freedom for the combined variance is not required in the evaluation of expanded uncertainty, and the appropriate coverage factor for 95% level of confidence was determined to be 1.96.

• Journal of Aerospace System Engineering
• /
• v.12 no.3
• /
• pp.53-57
• /
• 2018

The Monte Carlo simulation (MCS) method and the Guide to the Expression of Uncertainty in Measurement (GUM) are the most widely used approaches for uncertainty estimation. In this paper, MCS and GUM were used to estimate the confidence of MOI measurement equipment developed in-house. According to the results, the GUM estimated uncertainty was slightly underestimated compared to the MCS method. This difference is due to the approximation used by GUM. MOI uncertainties estimated by both methods were less than 1% of the estimate, which shows the high measurement reliability of the developed MOI measurement system.

• Food Science and Industry
• /
• v.40 no.1
• /
• pp.27-35
• /
• 2007

측정불확도란 시험결과에 대하여 측정량을 합리적으로 추정한 값들의 분산 특성을 나타내는 파라미터(parameter)로써 ILAC(국제시험소인정협력체) 등의 국제기구와의 측정결과에 대한상호인정 및 신뢰성 확보에 필수적인 요소이다. 국제표준(ISO/IEC 17025)에 맞는 시험분석 결과의 도출을 위해서는 먼저 소급성을 유지하고 그에 따른 불확도를 산출하여야 한다. 소급성은 실험의 모든 과정에 불확도를 가지고 끊기지 않는 비교연결을 통한 국제(국가)표준과 연관시키는 시스템으로, sampling에서 측정결과의 도출까지 소급성을 유지하는 것만이 측정결과의 신뢰성(정확 및 정밀)을 유지하는 최상의 시스템이다. Guide to the Expression of Uncertainty in Measurements(GUM)에 의한 불확도 계산 절차는 측정량(measurand)의 함수 표현, 입력량의 표준불확도(standard uncertainty)의 계산(표준편차, 평균의 표준편차), 합성표준불확도(combined uncertainty)의 계산, 확장불확도(expanded uncertainty)의 계산을 통한 통계적 추정을 하는 것이다. 오렌지 쥬스 중 카드뮴을 분석함에 있어서, 실험실에 대해서는 국제표준화(ISO17025) 시스템을 도입하고 분석시약 및 기기에 대하여 소급성을 유지하여, 분석결과의 신뢰성을 확보하기 위한 측정불확도를 산출하였다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.8
• /
• pp.802-807
• /
• 2014

In this paper, an accurate method to estimate the measurement uncertainty of a power amplifier was proposed. Because power amplifiers incorporate mismatch at the drain for the optimal performance, the general method is not enough to produce precise measurement uncertainty of the output power. In order to supplement this method, We suggest comprehensive power measurement uncertainty which is utilized by a complex reflection coefficient and measurement uncertainty of S-parameter which contain the mismatch at the drain on the power amplifier. After that, we compared it with real measurement results of the 10 watt power amplifier which operates on 3.7 GHz. As a result, suggested measurement uncertainty could obtain the uncertainty of output power near 10 times accurate in comparison with existing uncertainty calculation method.

• Korean Journal of Optics and Photonics
• /
• v.21 no.2
• /
• pp.46-52
• /
• 2010

A theory of bidirectional reflectance-distribution function (BRDF), a newly developed BRDF measurement system, and a method for evaluating the uncertainty of BRDF measurements are presented. The BRDF measurement system which measures BRDF in a wavelength range of (380~1500) nm with an angle range of $(-75{\sim}75)^{\circ}$ was installed. The measurement uncertainties, consisting of correlated terms and uncorrelated terms, were evaluated for the BRDF measurement system, resulting in the relative expanded uncertainty less than 3% (k=2).

• 한국가스학회:학술대회논문집
• /
• 2007.04a
• /
• pp.42-49
• /
• 2007

가스크로마토그래피 불꽃이온화검출기(FID)에서, 천연가스 표준물질만을 사용하여 분석할 때 발생할 수 있는 분석 불확도에 대하여 연구하였다. 일반적으로 $10^5$ 범위 농도까지 직선성이 확보된 것으로 알려진 FID 검출기에 대하여 실제 분석에서 동일한 직선성이 확보되는지를 확인하였다. 본 연구에서 7성분으로 조성된 천연가스용 표준가스를 샘프링 loop의 크기를 1.0mL, 0.50mL, 0.25mL로 변환시키면서 GC/FID를 사용하여 분석한 상대표준불확도 결과는 다음과 같다. 메탄은, 0.458 %, 에탄은 0.20247%, 프로판은 0.1497%, i-부탄은 0.1854 %, n-부탄은 0.2977%, i-펜탄은 0.263%, n-펜탄은 0.383%이었다. 각 경우에서 직선성 상대표준불확도값이 $0.15%{\sim}0.45 %$까지 이른다. 일반적으로 농도가 높은 메탄의 경우에 직선성 불확도값이 큰 값을 보여 주었고 농도범위가 1-5%인 $C2{\sim}C5$의 경우는 작은 직선성 표준불확도를 나타내었다.

• Proceedings of the Optical Society of Korea Conference
• /
• 2006.07a
• /
• pp.33-34
• /
• 2006