• Polymer Science and Technology
• /
• v.14 no.2
• /
• pp.206-213
• /
• 2003

• Polymer Science and Technology
• /
• v.13 no.6
• /
• pp.737-743
• /
• 2002

• Polymer Science and Technology
• /
• v.13 no.6
• /
• pp.769-775
• /
• 2002

• New & Renewable Energy
• /
• v.2 no.4 s.8
• /
• pp.46-55
• /
• 2006

본 연구는 불소그룹을 함유한 술폰화된 아릴렌에테르계 블록 공중합체 고분자 전해질막의 제조 및 연료전지 특성에 관한 것이다. 이러한 불소그룹을 함유한 술폰화된 아랄렌에테르계 블록 공중합체를 제조하기 위하여 양말단에 불소계 비닐기를 가지면서, 고분자 전환시 상온에서 술폰화 가능한 biphenyl계 단량체와 술폰화가 불가능한 sulfonyl계 단량체를 각각 합성하였다. Biphenyl계 단량체로 부터 올리고머를 합성한 후 sulfonyl계 단량체와 열적 고리화 부가중합을 하여 다양한 몰조성을 갖는 일련의 perfluorocyclobutane(PFCB)기를 포함하는 블록 공중합체를 제조하였다. 제조된 블록 공중합체를 상온에서 술폰화제인 chlorosulfonic acid(CSA)를 이용하여 후술폰화시켜 강산 이온기인 sulfonic acid를 biphenyl계 올리고머 부분에 선택적으로 도입하였다. 이렇게 제조된 술폰화된 고분자를 제막한 후 연료전지 특성을 Nafion-115와 비교하였다. 술폰화가 되는 올리고머 블록의 비율 증가에 따라 이온교환능력 (IEC)이 증가하였고 , 그에 따른 팽윤도 역시 증가하는 것을 보였다. 술폰화된 고분자들은 건조 및 습윤 상태에서도 기계적 강도가 우수하였다. 최적화된 술폰화 블록 고분자(S-2) 를 대상으로 membrane electrolyte assembly(MEA) 를 제조하여 연료전지 초기성능을 측정한 결과 Nafion-112와 유사한 전기화학적 성능을 나타내었다.

• Polymer(Korea)
• /
• v.38 no.4
• /
• pp.457-463
• /
• 2014

In this study, the changes in the chemical structure and the physical property of fluoropolymer films (PTFE, FEP, PFA, PVDF, and ETFE) induced by $Co^{60}$ gamma ray in air, $N_2$, and vacuum environments were investigated. FTIR spectra of the irradiated fluoropolymers indicate that the oxidation proceeded by the reaction of radicals generated by irradiation with oxygen in air. The changes in the heat of fusion and the degree of crystallinity of the irradiated fluoropolymers were investigated using DSC and the results indicate that the scission and crosslinking reactions of the irradiated fluoropolymers were largely influenced by the chemical structure. It was also found that the mechanical property of the irradiated fluoropolymer films under an air atmosphere was significantly decreased.

• Polymer(Korea)
• /
• v.34 no.5
• /
• pp.464-468
• /
• 2010

In this study, a vinylbenzyl chloride (VBC) monomer was successfully grafted onto the several fluoropolymer films including poly(tetrafluoroethylene-co-hexafluoropropylene) (FEP), poly(tetrafluoroethylene-co-perfluoropropylvinyl ether) (PFA), and poly(ethylene-co-tetrafluoroethylene) (ETFE) films by using a simultaneous irradiation method. The results indicated that PVBC graft polymer can be easily grafted onto the ETFE film than other fluorinated films under the same irradiation condition. The grafted films were characterized by using FTIR, TGA, and SEM-EDS instruments. The elongation at the breaking of the grafted films was found to decrease with an increase of degree of grafting (DOG). The PVBC-grafted ETFE films were found to have better mechanical properties than other PVBC-grafted fluorinated films.

• Polymer Science and Technology
• /
• v.12 no.6
• /
• pp.823-831
• /
• 2001

• Polymer Science and Technology
• /
• v.13 no.6
• /
• pp.751-758
• /
• 2002

• Journal of the korean academy of Pediatric Dentistry
• /
• v.40 no.2
• /
• pp.89-97
• /
• 2013

The purpose of this study is to investigate fluoride release in the oral cavity from polymer adhesive tape which is NaF coated PVA. 45 healthy adults were divided into 3 groups by the type of topical fluoride applied: 60seconds taste$^{(R)}$ APF gel (group 1), FluoroDose$^{(R)}$ varnish (group 2) and NaF-PVA (group 3). Topical fluoride was applied to the facial surface of maxillary 12 teeth and unstimulated whole saliva was collected to measure fluoride release after 1, 3, 6, 12, 24, and 48 hours. Fluoride-sensitive electrode was used for measuring the fluoride concentration in the saliva samples. All three groups showed significantly higher value for fluoride concentration than the baseline after 1 and 3 hours (p < 0.05). After 6 hours, group 3 showed significantly higher fluoride concentration than the baseline (p < 0.05) and also showed significantly higher value for fluoride concentration than group 1 and group 2. Between group 1 and group 2, however, there was no significant difference statistically with respect to fluoride concentration value (p > 0.05).

• Polymer Science and Technology
• /
• v.13 no.6
• /
• pp.724-736
• /
• 2002