• Journal of the Korean Geotechnical Society
• /
• v.36 no.7
• /
• pp.5-14
• /
• 2020

Kansai International Airport (KIX) was opened in September 1994. Although 26 years have passed since the completion of the first island, long-term settlement is still in progress. This settlement occurs in the Pleistocene layer. For it is not easy to determine the permeability of the Pleistocene sand layer because the thickness and the degree of fine content in the horizontal direction are constantly changing. In addition, it is also a difficult to predict the interactive behavior of the ground due to the construction of the second phase island adjacent to it. In order to solve this problem, a two-dimensional finite element analysis considering elasto-viscoplastic was performed to evaluate the long-term deformation, including the interactive behavior of the alternating Pleistocene foundation due to the construction of two adjacent reclaimed islands. In general, two-dimensional analysis can be used when a section can represent the entire sections. However, Kansai Airport is an artificial reclaimed island so two-dimensional analysis cannot solve the problem such as the stress deformation in the corners of the island. Additionally, the structure of the actual sub-ground through physical exploration is non-homogeneity and its thickness is also not constant. Therefore, there are limitations for the two-dimensional analysis to explain the phenomena. That is, three-dimensional analysis is strongly required. Due to these demands, the author extended the existing two-dimensional program capable of elasto-viscoplastic analysis to three-dimensional and completed the verification of the three-dimensional program developed through one-dimensional consolidation analysis. In order to demonstrate the validity of the developed 3D program that has been verified, an analysis is performed under the same analysis conditions as the existing research using a two-dimensional program. The effectiveness of the developed 3D numerical analysis program was demonstrated by comparing the analysis results with the 2D results and actual measurement data.

• The Journal of Engineering Geology
• /
• v.14 no.1
• /
• pp.93-104
• /
• 2004

This paper intended to assess the hydro-structure characteristics of volcanic rocks based on the hydrogeological data obtained from the underground storage cavern during construction. The variation of groundwater levels was periodically measured from the 28 surface monitoring holes(NX size) and the hydraulic pressures and injection rates were daily monitored from the water curtain holes(95 horizontal holes and 63 vertical holes). The hydraulic interference tests were performed in whole water curtain holes. The distribution patterns of hydraulic pressure are closely related to the dip angles of fracture intersected to the water curtain holes. Three domains can be grouped by the distribution of hydraulic pressures in the horizontal water curtain holes. The initial hydraulic pressures measured immediately after drilling of water crutain holes are high in ascending order of the cavern C-2, C-1, and C-3. The priliminary hydrochemical data also indicate that the portions of the deep groundwater composition is relatively great in the cavern C-3 area. Some of the horizontal water curtain holes in the cavern C-3 show a steady higher groundwater pressure with the composition of shallow groundwater indicating the outer boundary as constant hydraulic boundary. The water curtain holes in the cavern C-2 is characterized as low initial hydraulic pressure and less injection rates, suggesting poor hydraulic connectivity to a shallow groundwater system. The results of the study can help to understand a hydraulic compartment concept in a fracture hydro-geology and be utilized during the surface investigation for a groundwater system.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.1
• /
• pp.32-38
• /
• 2011

In this study, the correlations of concentrations in sediment heavy metals between two pretreatment methods, total digestion and aqua regia digestion, have been investigated. Total 43 samples had been collected from streams and lakes in Yeongsan and Seomjin watersheds. They were decomposed in two pretreatment methods and five metal components (Cd, Cr, Ni, Pb, Zn) were analyzed. Overall average concentrations of heavy metals were Zn>Cr>Pb>Ni>Cd in the order. The concentrations of aqua regia digestion were 35.0% (Cd), 53.8% (Cr), 66.2% (Ni), 64.4% (Pb) and 76.4% (Zn) of the concentrations of total digestion and heavy metal concentrations of total digestion were higher. Heavy metal concentrations in sediments from lakes were higher than those from streams. The correlation equations between the concentrations of total digestion and aqua regia digestion were obtained. The concentrations of Zn and Ni, which showed strong linear correlations, increased in aqua regia digestion as the concentration in total digestion increased. The linear correlation coefficients between two digestion methods for most analyzed metals were above the average correlation. However, these results can be applied with limitations due to heterogeneity of sediments.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.11 no.3
• /
• pp.179-192
• /
• 2013

This study is characterized the groundwater flow pattern near crystalline site of Yangbook-Myeon, Gyeong-ju City, South Korea. From the time series analyses, groundwater level could be classified into 4 types reflecting the hydrogeological characteristics and rainfall pattern. The type I (DB1-1, DB1-2) may be directly influenced by rainfall pattern. The type II (DB1-3, DB1-7, KB-1, KB-2, KB-3, KB-7, KB-14, KB-15) may be influenced by rainfall event as well as groundwater flow through water-conducting features. The type III (DB-5, DB1-6, DB2-2, KB-10, KB-11, KB-13) may be predominantly happens in the crystaline rock mass, groundwater in this type flows through the minor fracture networks rather than direct effect of rainfall event. The type IV (DB1-8, KB-9) may be influenced by irregular variation of the groundwater level due to anisotropy and heterogeneity of crystalline rock.

• Journal of the Korean Society of Groundwater Environment
• /
• v.6 no.3
• /
• pp.152-157
• /
• 1999

Oil leaked from underwound storage tanks and leachate from sanitary landfills have been known as contaminant sources of the high-quality groundwater resources. The mobility of contaminants in the aquifer largely depends on the groundwater flow and the determination of associated hydraulic parameters is essential for a proper remediation of contaminated grnundwater. This study aimed at determining an optimum set of hydraulic parameters for an unconfined sandy aquifer of a laboratory scale through comparison of various methods. Results showed that the specific yield obtained from gravity drainage experiment was an average of 0.20 with minor variations in aquifer depths. and the permeabilities obtained from Dupuit approximation and slug test gave similar values of 5.33 cm/min and 5.85 cm/min but the constant head method gave 0.17 cm/min, which is much ion than the other methods. This experimental evidence reveals that the permeability of the unconfined sandy aquifer could be accurately determined by Dupuit assumption or slug tut rather than by constant head method conducted for a disturbed separate soil column.

• Proceedings of the Mineralogical Society of Korea Conference
• /
• 2003.05a
• /
• pp.53-53
• /
• 2003

남한에 분포하는 현생 화강암류는 트라이아스기-쥬라기의 소위 대보화강암과 백악기-제3기의 불국사화강암으로 분류되어 왔다. 대보조산운동은 대동누층군의 퇴적이후에 일어난 조구조운동을 지칭하므로 트라이아스기의 화강암을 포함하는 대보화강암이라는 명칭은 그와 사실상 직접적인 관계는 없다. 트라이아스기-쥬라기의 화강암은 영덕, 청송 암체 외에는 경상분지 밖에 위치하고 백악기-제3기의 화강암은 속리산, 월악산 암체 외에는 경상분지 안쪽에 주로 분포한다. 트라이아스기-쥬라기의 화강암 중 영광-대전-청주-충주-원주-강릉 방면에 걸쳐 북동-남서 방향으로 분포하는 화강암질 저반은 남한에서 가장 넓은 면적을 차지하는 화강암체지만 신뢰할만한 연대측정 자료가 매우 부족한 실정이다. 이 화강암질 저반에 대해서는 Rb-Sr, K-Ar법이 해답을 주기 어렵다. 예를 들어 청주-음성-증평 지역의 화강암류에 대한 Rb-Sr 전암 자료는 분산이 심하며 약 380 Ma에 해당되는 초시선을 보여 기원물질의 불균질성 내지 불완전한 혼합 효과를 반영하고 있다. 옥천대와 영남육괴에 분포하는 일부 화강암체에 대해 잘못 보고된 Rb-Sr 전암연대 역시 모두 중광물의 U-Pb 연대보다 오래된 값을 보이는 것으로 보아 이들은 생성 당시부터 일정한 $^{87}$ Sr/$^{86}$Sr 초기치를 가지지 않고 Rb/Sr 비에 따른 양(+)의 기울기를 가졌음이 확실하다. 과잉의 방사기원 Ar을 가지거나 폐쇄온도가 낮은 광물들을 대상으로 한 K-Ar 자료 역시 화강암체의 관입편대를 정확하게 지시할 수는 없다. 우리는 이에 대한 연구의 일환으로 충청남도 청원군의 물류센터에서 채취한 중립질의 흑운모화강암 한 시료에 대한 U-Pb 스핀연대측정 결과를 다음과 같이 보고한다. $^{206}$ Pb$^{*}$ /$^{238}$ U age = 174.6$\pm$2.7 Ma $^{207}$ Pb$^{*}$ /$^{235}$ U age = 170.3$\pm$14.6 Ma $^{207}$ Pb$^{*}$ /$^{206}$ Pb sup */ age = 111$\pm$187 Ma 위에서 볼 수 있듯이 청주화강암의 스핀에 대해 콘코던트(concordant)한 연대가 얻어졌으며 자료의 오차, 스핀의 U-Pb계에 대한 폐쇄온도 및 화강암의 솔리더스(solidus)를 고려할 때 $^{206}$ Pb$^{*}$ /$^{238}$ U 연대인 174.6$\pm$2.7 Ma를 관입정치시기로 해석한다. 동일 시료의 흑운모에 대해서는 145 Ma의 Rb-Sr 연대가 얻어졌으며 따라서 관입이후 약 35$0^{\circ}C$까지 대략 1$0^{\circ}C$/Ma의 냉각속도를 구할 수 있었다. 청주화강암의 쥬라기 중기 연대는 영광-대전-청주-충주-원주-강릉 지역의 화강암질 저반이 대동누층군 퇴적 이후에 일어난 지구조 사건과 연관되었을 가능성을 지시하지만 이를 확인하기 위해서는 더 많은 자료가 요구된다. 우리는 현재 충주, 괴산 지역의 화강암체에 대해서도 스핀 연대측정을 수행중에 있으며 이들 자료를 암상을 구분하여 해석한다면 우리나라 중생대 지구조운동에 대한 새로운 사실이 밝혀질 수 있을 것으로 믿는다.

• Journal of the Korean Wood Science and Technology
• /
• v.41 no.6
• /
• pp.490-496
• /
• 2013

The board using recycled wood waste chip tends to decrease in terms of physical and mechanical properties. The reasons are notably different shape of chips, components of used adhesive and impurity content, which bring the irregular quality and downgrading of board. More over, the board has higher emissivity of formaldehyde than regular board, because recycled chip contains adhesives that were used to make previous products. This low quality of products weakens the price and quality competitiveness, and it led to bringing the issue of problem in Korean board industry. For these reason, in this study, boards using byproducts of plywood were made to evaluate physical and mechanical properties according to manufacturing conditions. As a result, The board was consists of 4~16 mesh chips for core layer and veneer on both face and they were combined using EMDI, and its' bending strength was 57.7 $N/mm^2$ which is 215% higher than that of OSB (26.8 $N/mm^2$). Moreover, the emissivity of formaldehyde was 0.7 ppm, this board seems to substitute OSB for rated sheathing.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.3
• /
• pp.224-234
• /
• 2019

Waterproof layers are installed in civil engineering structures and bridge construction is commonly finished by applying a layer of regular or asphalt concrete above the waterproof layer. However, asphalt materials are susceptible to melting at high temperature due to its superior temperature sensitivity, and this causes the waterproofing material to melt due to the high temperature of the asphalt concrete, thereby increasing the defect occurrence rate due to the thickness reduction. In this study, tensile strength and elongation of hard and soft type of MMA(Methyl Methacrylate) applied to bridges were compared in accordance to standard performance criteria based on different mixture ratios. Results of comparative testing showed that hard MMA resin can display a satisfactory tensile strength, and soft MMA resin displays satisfactory elongation properties, but as the two resin types are separately used, neither types are able to satisfy the standard requirements outlined in KS F 4932. When the amount of the powder exceeds 56.25% of the total amount, voids are generated on the surface after curing and self leveling was impossible and a heterogeneous surface is formed. Furthermore, when the hard resin: soft resin: powder mixture ratio was set to 15g: 85g: 150g. the tensile strength was $1.5N/mm^2$ and the elongation percentage was 133% which satisfy the tensile performance of KS F 4932.

• Journal of the Geological Society of Korea
• /
• v.54 no.5
• /
• pp.557-566
• /
• 2018

Pohang earthquake (Main shock magnitude = 5.4) occurred in Southeastern region of South Korea in November 15, 2017. Groundwater levels of 6 monitoring wells with 5 minutes interval measurements located in that region and stream water levels of 4 stations located along the Hyeongsan-gang stream are used for the analysis of earthquake induced effects. Four groundwater monitoring wells show a short-term decrease of groundwater level after a main shock and one well does an increase and the maximum change is about 42.0 cm. Especially, groundwater levels at two monitoring wells near the epicenter are consistently maintained after a decrease. There is little relationship between earthquake magnitude or a distance to epicenter and changing amount of groundwater level and it may be due to the inhomogeneity of geologic material and unconsolidated sediments distribution. The changes in permeability of fractured zone and groundwater levels occasionally cause changes in stream flow rate, and water level of the Hyeongsan-gang stream in the study area decreases just after the earthquake and increases again up to the normal level and next shows an more gentle decreasing slope. Total increasing flow rates at S1 (upstream site) and S4 (downstream site) stations are about $12,096m^3$ and $116,640m^3$, respectively, during the increasing period.

• The Journal of Engineering Geology
• /
• v.31 no.3
• /
• pp.381-393
• /
• 2021

Physical, mechanical, hydraulic, and geophysical tests were applied to validate methods of inspecting the effectiveness of grouting on an agricultural reservoir dam. Data obtained from series of in situ and laboratory tests considered four stages: before grouting; during grouting; immediately after grouting; and after aging the grouting for 28 days. The results of SPT and triaxial tests, including the unit weight, compressive strength, friction angle, cohesion, and N-value, indicated the extent of ground improvement with respect to grout injection. However, they sometimes contained errors caused by ground heterogeneity. Hydraulic conductivity obtained from in situ variable head permeability testing is most suitable for identifying the effectiveness of grouting because the impermeability of the ground increased immediately after grouting. Electric resistivity surveying is useful for finding a saturated zone and a seepage pathway, and multichannel analysis of surface waves (MASW) is suitable for analyzing the effectiveness of grouting, as elastic velocity increases distinctly after grouting injection. MASW also allows calculation from the P- and S- wave velocities of dynamic properties (e.g., dynamic elastic modulus and dynamic Poisson's ratio), which can be used in the seismic design of dam structures.