• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.47.2-47.2
• /
• 2011

광전환 효율 20% (AM1.5G) 이상의 고효율 화합물 박막태양전지의 광흡수층으로 많은 관심을 받고 있는 $Cu(In,Ga)Se_2$ (CIGS) 태양전지의 광흡수층은 다양한 공정에 의해 제조가 가능하다. 현재 고효율 CIGS 셀 생성을 위해 널리 사용되고 있는 CIGS 흡수층 성장공정은 "co-evaporation (동시증발법)"과 2-step 공정이라 불리는 "precursorselenization(전구체-셀렌화)" 방법이다. 동시증발법은 개별원소 Cu, In, Ga, Se들을 고진공 분위기에서 고온(550~600$^{\circ}C$) 기판위에 증착하는 방법으로 소면적에서 가장 좋은 효율(~20%)을 보이는 공정이다. 하지만, 고온, 고진공 공정조건과 대면적 증착시 온도 및 조성 불균일 등의 문제점 등으로 상용화에 어려움이 있다. 전구체-셀렌화 공정은 1단계에서 다양한 방식(예: 스퍼터링, 전기도금, 프린팅 등) 방식으로 CuGaIn 전구체를 증착하고, 2단계에서 고온(550~600$^{\circ}C$)하에 H2Se gas 혹은 Se vapor와 반응시켜 CIGS를 생성한다. 일본의 Showa Shell와 Honda Soltec 등에 의해 이미 상업화 되었듯이, 저비용 대면적으로 상업화 가능성이 높은 공정으로 평가되고 있다. 하지만, 2단계에서 사용되는 H2Se 및 Se vapor의 유독성, 기상 Se과 금속전구체 간의 느린 셀렌화 반응속도, 셀렌화반응 후 생성된 CIGS 박막 두께방향으로의 Ga 불균일 분포, 생성된 CIGS/Mo 계면 접착력 저하 등의 문제점들이 개선, 해결되어야만 상업화에 성공할 수 있을 것이다. 본 연구에서는 Se layer가 코팅된 금속전구체의 셀렌화 반응메카니즘을 in-situ high-temperature XRD를 이용하여 연구하였다. 금속전구체는 스퍼터링, 스프레이 등 다양한 방법으로 제조되었고, 반응메카니즘 연구결과를 바탕으로 Se 코팅된 금속전구체를 이용한 급속열처리 공정의 최적화를 시도하였다.

• Journal of the Korean Magnetics Society
• /
• v.1 no.2
• /
• pp.31-36
• /
• 1991

Structural and compositional heterogeneities of sputter deposited, amorphous $Co_{87}Zr_{4}NB_{9}$ thin films were investigated using TEM and EDS with windowless detector. The films deposited with substrate bias and annealed in rotating magnetc field showed two amorphous phases of Co-rich region and (ZrNb)oxide-rich region, and revealed 'ultra-soft' magnetic properties. Revesible bias-responses and overdamped frequency responses, along with small Hc, Hk and Mr/Ms ratio, give the possibility of ultra-soft magnetic behavior fo CoZrNb thin films. We proposed the vortex type magnetization distribution in remanent state which was correlated with the thin film heterogeneity. Then, the ultra-soft characteristics of the compositionally heterogeneous films were explained by the spin vortices that minimized the total magnetostatic and exchange coupling energies.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.11
• /
• pp.1587-1592
• /
• 2010

The effects of specimen geometry and loading conditions on the stress distribution in a sandwich specimen under combined loads are investigated by elastic finite element analysis. A commercial software NASTRAN is used in plain-strain two-dimensional finite element analysis of sandwich specimens; the analysis was performed for three different specimen shape factors and four different combined displacement conditions. The results of computational analysis suggest that the effect of the combined displacement angle, which is defined as the ratio of the shear displacement to the normal displacement, on the size of the non-homogeneous stress distribution is observed only in the case of the shear stress and von Mises stress. Also as the combined displacement angle increases, the size of the nonhomogeneous stress distribution decreases in the case of the shear stress and increases in the case of the von Mises stress. In addition, as the specimen shape factor, which is defined as the ratio of the specimen length to the height, increases, the size of the non-homogeneous stress distribution under combined displacement conditions decreases significantly.

• Journal of Radiation Protection and Research
• /
• v.33 no.4
• /
• pp.151-160
• /
• 2008

In Korean nuclear power plants (NPPs), two thermoluminescent dosimeters (TLD) were provided to workers who work in an inhomogeneous radiation field; one on the chest and the other on the head. In this way, the effective dose for radiation workers at NPPs was determined by the high deep dose between two radiation dose from these TLDs. This represented a conservative method of evaluating the degree of exposure to radiation. In this study, to prevent the overestimation of the effective dose, field application experiments were implemented using two-dosimeter algorithms developed by several international institutes for the selection of an optimal algorithm. The algorithms used by the Canadian Ontario Power Generation (OPG) and American ANSI HPS N13.41, NCRP (55/50), NCRP (70/30), EPRI (NRC), Lakslumanan, and Kim (Texas A&M University) were extensively analyzed as two-dosimeter algorithms. In particular, three additional TLDs were provided to radiation workers who wore them on the head, chest, and back during maintenance periods, and the measured value were analyzed. The results found no significant differences among the calculated effective doses, apart from Lakshmanan's algorithm. Thus, this paper recommends the NCRP(55/50) algorithm as an optimal two-dosimeter algorithm in consideration of the solid technical background of NCRP and the convenience of radiation works. In addition, it was determined that a two-dosimeter is provided to a single task which is expected to produce a dose rate of more than 1 mSv/hr, a difference of dose rates depending on specific parts of the body of more than 30%, and an exposure dose of more than 2 mSv.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.12
• /
• pp.27-34
• /
• 2005

We have investigated the correlation between the active-layer uniformity and reliability of InGaN/GaN blue LEDs. According to initial characteristics, the devices are classified into two groups: group I devices of uniform light-emission and group II devices of non-uniform light-emission. The group II devices are more dependent on temperature and we have found two degradation mechanisms through reliability test. One is bulk degradation in which the degradation occurred over the entire chip and another one is edge degradation in which the degradation occurred from the edge of the chip. Bulk degradation caused by the nonradiative defects is found to be faster in group II devices while there is no difference in the rate of the much faster edge degradation, where darkening starts from the n-Ohmic contact edge. Therefore, more uniform active layer, more uniform current spreading, and the passivation of the dry-etched side-wall are essential for the high reliability of InGaN/GaN LEDs.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.20 no.1
• /
• pp.43-48
• /
• 1984

The transfer matrix method is well-known and extensively used for finding solutions in vibration problems. At the final stage of this method natural frequencies are obtained by a trial and error search procedure. In this paper authors presented the method which needed only a few division number to yield an accurate solution and the most effective method to get an approximate solution in the case of beam vibrations. The methods which were presented by authors could be applied for the beam with nonuniform section and uniformly distributed load, and the values of numerical calculations by these methods have just agreed with those of experiments.

• Nuclear Medicine and Molecular Imaging
• /
• v.42 no.1
• /
• pp.52-60
• /
• 2008

Purpose: To establish the methods for sinogram formation and correction in order to appropriately apply the filtered backprojection (FBP) reconstruction algorithm to the data acquired using PET scanner with multiple scintillation crystal layers. Materials and Methods: Formation for raw PET data storage and conversion methods from listmode data to histogram and sinogram were optimized. To solve the various problems occurred while the raw histogram was converted into sinogram, optimal sampling strategy and sampling efficiency correction method were investigated. Gap compensation methods that is unique in this system were also investigated. All the sinogram data were reconstructed using 20 filtered backprojection algorithm and compared to estimate the improvements by the correction algorithms. Results: Optimal radial sampling interval and number of angular samples in terms of the sampling theorem and sampling efficiency correction algorithm were pitch/2 and 120, respectively. By applying the sampling efficiency correction and gap compensation, artifacts and background noise on the reconstructed image could be reduced. Conclusion: Conversion method from the histogram to sinogram was investigated for the FBP reconstruction of data acquired using multiple scintillation crystal layers. This method will be useful for the fast 20 reconstruction of multiple crystal layer PET data.

• Investigative Magnetic Resonance Imaging
• /
• v.14 no.1
• /
• pp.21-30
• /
• 2010

Purpose : To examine the imaging findings of mucinous breast carcinoma and to evaluate the difference in these findings based on the histopathologic grade. Materials and Methods : We retrospectively analyzed the imaging features according to BI-RADS in 29 patients with surgically proven mucinous carcinoma. The histopathologic grade was classified as well-differentiated, moderately-differentiated and poorly-differentiated. Based on these criteria, the differences in imaging findings were statistically analyzed. Results : Mammography was available in 20 cases, which contained 17 mass lesions (85%) and 3 cases of normal findings. On ultrasonography (27 cases), mucinous carcinoma was observed as a mass with an oval shape (59.3%), a microlobulated margin (55.6%) or an inhomogeneous isoechogenicity (74.1%). On MRI (21 cases), mucinous carcinoma was commonly observed to have a lobular shape (76%), smooth margin (86%) or heterogeneous contrast-enhancement (61.9%). On the kinetic curve, there was a delayed wash-out pattern (52.3%). There were no significant differences in the imaging findings for each histopathologic grade except that a welldifferentiated tumor had an abrupt interface. Conclusion : A well-differentiated mucinous carcinoma tended to have an abrupt interface on ultrasonography, as compared with the moderately-differentiated one. Mucinous carcinoma showed a heterogeneous enhancement and a delayed washout kinetic curve pattern on dynamic MRI.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.4
• /
• pp.341-346
• /
• 2011

In the development of high-speed trains, ride comfort is an important factor that determines the quality of the train. In this study, the ride comforts of high-speed trains with rigid and flexible car bodies were evaluated. The rail irregularity is used as an exciting source of the car-body bounce motion. The complex extruded structures of the car-body are modeled as shell structures using the calculated equivalent stiffness of the flexible model. The numerical results show that the ride of the rigid-body model improves as the speed increases, which is unreasonable. In contrast, the relationship between ride comfort and speed in the case of flexible-body model is reasonable. Thus, it is confirmed that the flexibility of the car body needs to be taken into consideration while fabricating a high-speed train.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.24-24
• /
• 2010

Chalcopyrite $Cu(In,Ga)Se_2$ (CIGS) 화합물 반도체는 고효율 박막태양전지의 광 흡수층으로 사용되는 물질 중 가장 우수한 효율 (19.9%, NREL 2008)을 보유하고 있다. CIGS는 직접천이형 에너지밴드갭 (direct bandgap)을 가지고 있고, 광흡수계수가 $1{\times}10^5\;cm^{-1}$로서 반도체 중 서 가장 흡수율이 높은 재료에 속하여 두께 $1{\sim}2\;{\mu}m$의 박막으로도 고효율의 태양전지 제조가 가능하고, 또한 장기적으로 전기광학적 안정성이 매우 우수한 특성을 지니고 있다. 현재 고효율 CIGS 셀생성을 위해 널리 사용되고 있는 CIGS 흡수층 성장공정은 "co-evaporation(동시증발법)"과 2-step 공정이라 불리는 "sputter-selenization(스퍼터-셀렌화)" 방법이다. 동시증발법은 개별원소 Cu, In, Ga, Se 들을 고진공 분위기에서 고온 ($550{\sim}600^{\circ}C$)기판위에 증착하는 방법으로 소면적에서 가장 좋은 효율(~20%)을 보이는 공정이다. 하지만, 고온, 고진공 공정조건과 대면적 증착시 온도 및 조성 불균일 등의 문제점 등으로 상용화에 어려움이 있다. 스퍼터-셀렌화 공정은 1단계에서 스퍼터링 방식으로 CuGaIn 전구체를 증착하고, 2단계에서 고온($550{\sim}600^{\circ}C$)하에 $H_2Se$ 혹은 Se vapor와 반응시켜 CIGS를 생성한다. 일본의 Showa Shell와 Honda Soltec 등에 의해 이미 상업화 되었듯이, 저비용 대면적으로 상업화 가능성이 높은 공정으로 평가되고 있다. 하지만, 2단계에서 사용되는 $H_2Se$ 및 Se vapor의 유독성, 기상 Se과 금속전구체 간의 느린 셀렌화 반응속도, 셀렌화반응 후 생성된 CIGS 박막 두께방향으로의 Ga 불균일분포, 생성된 CIGS/Mo 계면 접착력 저하등의 문제점들이 해결되어야만 상업화에 성공할 수 있을 것이다. 본 Tutorial에서는 CIGS 물질의 열역학 상평형과 반응메카니즘에 대해 설명하고, 다양한 생성 공정들을 소개할 것이다.