• Journal of the Korean earth science society
• /
• v.33 no.7
• /
• pp.596-607
• /
• 2012

The R-Z relationship is one of important error factors to determine the accuracy of radar rainfall estimation. In this study, we have explored the effect of the R-Z relationships derived from disdrometer data in estimating the radar rainfall. The heavy rain event that produced flooding in St-Remi, Quebec, Canada has been occurred. We have tried to investigate the severity of rain for this event using high temporal (2.5 min) and spatial resolution ($1^{\circ}$ by 250 m) radar data obtained from the McGill S-band radar. Radar data revealed that the heavy rain cells pass directly over St-Remi while the coarse raingauge network was not sufficient to detect this rain event. The maximum 30 min (1 h) accumulation reaches about 39 (42) mm in St-Remi. During the rain event, the two disdrometers (POSS; Precipitation Occurrence Sensor System) were available: One used for the reflectivity calibration by comparing disdrometer Z and radar Z and the other for deriving disdrometric R-Z relationships. The result shows the significant improvement with the disdrometric reflectivity-dependent R-Z relationships against the climatological R-Z relationship. The bias in radar rain estimation is reduced from +12% to -2% and the root-mean squared error from 16 to 10% for daily accumulation. Using the estimated radar rainfall rate with disdrometric R-Z relationships, the flood event was well captured with proper timing and amount.

• Transactions of the KSME C: Technology and Education
• /
• v.1 no.1
• /
• pp.13-19
• /
• 2013

Ftheta Lens, whose image height is proportional to its field view angle, is one of the most important parts in Laser Scanning Unit(LSU). In this paper $f{\theta}$ lens design, mold production and modification method of lens design and mold are introduced. Lens design was carried out with Zemax and Special Toric surfaces were applied for lens surfaces to minimize distortion both in main and sub scanning directions. And a high precision machine with 1nm resolution was used to fabricate lens mold cores. After injection the lens was evaluated and the difference from design was examined. This difference was compensated by modifying lens design and new lens mold cores were made according to modified lens design to obtain the quality of original design.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.608-608
• /
• 2013

직선운동하는 하전입자의 진행방향에 수직한 평면상에 서로 직교하는 전기장과 자기장을 걸어주면, 하전입자에는 전기장에 의한 힘 $F_E$와 자기장과 속도 v에 의한 로렌츠력 $F_B=q(v{\times}B)$가 동시에 작용하게 된다. 이때 Wien 조건 $F_B=-F_E$를 만족하는 질량 $m_A$과, 에너지 $E_A$를 가지는 하전입자 A는 휘지 않고 직선운동을 계속하나, 하전입자 A와 다른 에너지 $E_B(=E_A+{\delta}E)$나 질량 $m_B$ $(=m_A+{\delta}m)$을 가지는 하전입자는 휘게 되며, 그 휘는 정도는 ${\delta}E$나 ${\delta}m$에 비례하게 된다. 이 현상을 이용하여 다양한 종류의 에너지 또는 질량 분석기가 독일, 미국, 일본 등의 분석기기 선진국에서 개발되어 왔고, 전자현미경의 이미지 필터로도 활용되고 있으며, 통상 EXB 필터 또는 발명자의 이름을 딴 Wien 필터로 불리어지고 있다. $E{\times}B$ 필터는 일반적인 하전입자빔 렌즈와 다른 광학특성을 가진다. 예를 들면 3차 이상의 기하 수차만 가지는 일반 렌즈와는 달리 $F_B$, $F_E$ 전자기력에 의해 다양한 2차 기하 수차를 가지게 되며, 초점거리 등의 1차 광학 특성도 일반 렌즈와는 다른 경향을 보여준다. 본 발표에서는 $E{\times}B$ 필터의 전후로 각각 6극자+4극자를 조합시킨 보정기를 배치시켜 필터의 에너지 분해능의 성능을 향상시킬 수 있음을 빔 궤도 방정식을 분석적으로 계산하여 보여준다. 위 에너지 필터 구성에서 4극자는 1차 광학 특성을 조정하는 역할을 하며 6극자는 2차 수차를 줄여주는 역할을 한다. 수치해석을 통해서는 6극자+4극자를 조합시킨 보정기와 $E{\times}B$ 필터의 좀더 정확한 전극 전압 등의 제어 수치를 추출하고, 빔 궤도 방정식 분석을 통한 수차 보정 알고리즘이 유효함을 보여준다.

• Radiation Oncology Journal
• /
• v.15 no.1
• /
• pp.65-69
• /
• 1997

Purpose : To obtain the actual dose distribution from measured data by doconvolution method using the measured ion chamber response function. Materials and Methods : The chamber response functions for 2 ionization chambers (diameter 5mm, 6.4mm) were measured. and dose Profiles were measured for $10{\times}20cm^2$ field size using two different detectors. The deconvolution of chamber response function from the measured data were performed for these Profiles. The same procedures were repeated for 4MV, 6MV and 1 SMV photon energies. Results : Different dose Profiles were obtained for the same field with the chambers which have the different response functions. Nearly the same results could be obtained with deconvolution for the profiles from various detectors. Conclusion : The effect of the chamber response function can be extracted by deconvolution method. Deconvolved dose profile using various ionization chambers gave better dose distributions. Technical improvements are needed for practical application.

• Journal of Astronomy and Space Sciences
• /
• v.21 no.4
• /
• pp.391-398
• /
• 2004

Far-ultraviolet Imaging Spectrograph (FIMS) is the main payload of the Korea's first scientific micro satellite STSAT-1, which was launched at Sep. 27 2003 successfully. Major objective of FIMS is observing hot gas in the Galaxy in FUV bands to diagnose the energy flow models of the interstellar medium. Supernova remnants, molecular clouds, and Aurora emission in the geomagnetic pole regions are specific targets for pointing observation. Although the whole system was calibrated before launch, it is essential to perform on-orbit calibration for data analysis. For spectral calibration, we observed airglow lines in the atmosphere since they provide good spectral references. We identify and compare the observed airglow lines with model calculations, and correct the spectral distortion appeared in the detector system to improve the spectral resolution of the system.

• Journal of the Korean earth science society
• /
• v.26 no.7
• /
• pp.691-697
• /
• 2005

Recently, the development of accurate gravity-meter and GPS make it possible to obtain high resolution gravity data. Though gravity data interpretation like modeling and inversion has significantly improved, gravity data processing itself has improved very little. Conventional gravity data processing removes gravity effects due to mass and height difference between base and measurement level. But, it would be a biased density model when some or whole part of anomalous bodies exist above the base level. We attempted to make a multiquadric surface of the survey area from topography with DEM (Digital Elevation Map) data. Then we constituted rectangular blocks which reflect real topography of the survey area by the multiquadric surface. Thus, we were able to carry out 3-D inversions which include information of topography. We named this technique, 3-D Gravity Terrain Inversion (3DGTI). The model test showed that the inversion model from 3DGTI made better results than conventional methods. Furthermore, the 3-dimensional model from the 3DGTI method could maintain topography and as a result, it showed more realistic geologic model. This method was also applied on real field data in Masan-Changwon area. Granitic intrusion is an important geologic characteristic in this area. This method showed more critical geological boundaries than other conventional methods. Therefore, we concluded that in the case of various rocks and rugged terrain, this new method will make better model than convention ones.

• The Journal of Engineering Geology
• /
• v.29 no.2
• /
• pp.153-162
• /
• 2019

Rapid variations in the geometry (i.e., thickness) of the refractor and low velocities affect greatly the imaging of the reflectors of land seismic data. Conventional solutions to obtain the weathering models utilizes first break picking method, which requires time consuming steps and causes the human error in picking the first arrivals. A new interferometric approach (interferometric refraction statics, IRS) which utilizes the first arrival signal (S/N enhanced by refraction convolution stack) instead of first break picking, is tested in this study to the synthetic data from the velocity structure provided by surface geophysics (refraction, MASW) and borehole geophysics (tomography, SPS logging) for the Cheongju granitic bodies. The results of IRS approach are found to be better than the ones from conventional first break picking in terms of continuities and horizontal resolution of the reflectors. The unresolved long-wavelength statics in brute stack are much removed by IRS weathering correction and the overlying refractors (the base of shallow weathering zone) are incidentally delineated in the refraction convolution stack.

• Korean Journal of Optics and Photonics
• /
• v.18 no.5
• /
• pp.309-316
• /
• 2007

We demonstrate the wavelength swept source and signal processing for the frequency domain optical coherence tomography. The laser output performance is improved by using a semiconductor optical amplifier with a booster amplifier. The laser generates 14 mW of average power of which wavelength shift in the lasing spectral shape is compensated. Adopting a Fabry-Perot etalon and digital signal processing, the broadening of the beat frequency due to the variance of wavelength-sweep-velocity is calibrated. The optical coherence tomography system shows 154.4 kHz of axial scanning speed, 0.95mm of depth range, and $12{\pm}0.37{\mu}m$ of axial resolution.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.270.2-270.2
• /
• 2013

직선운동하는 하전입자의 진행방향에 수직한 평면상에 서로 직교하는 전기장과 자기장을 걸어주면, 하전입자에는 전기장에 의한 힘 FE와 자기장과 속도 v에 의한 로렌츠력 $F_B=q(v{\times}B)$가 동시에 작용하게 된다. 이때 Wien 조건 FB=-FE를 만족하는 질량 mA과, 에너지 EA를 가지는 하전입자 A는 휘지 않고 직선운동을 계속하나, 하전입자 A와 다른 에너지 $E_B\;(=E_A+{\delta}E)$나 질량 $m_B\;(=m_A+{\delta}m)$을 가지는 하전입자는 휘게 되며, 그 휘는 정도는 ${\delta}E$나 ${\delta}m$에 비례하게 된다. 이 현상을 이용하여 다양한 종류의 에너지 또는 질량 분석기가 독일, 미국, 일본 등의 분석기기 선진국에서 개발되어 왔고, 전자현미경의 이미지 필터로도 활용되고 있으며, 통상 EXB 필터 또는 발명자의 이름을 딴 Wien 필터로 불리어지고 있다. $E{\times}B$ 필터는 일반적인 하전입자빔 렌즈와 다른 광학특성을 가지며, 지난 발표에서는 $E{\times}B$ 필터의 기본 궤도 방정식 및 다양한 2차 기하 수차 방정식의 유도과정 및 결과를 보여주었다. 본 발표에서는 EXB 필터의 전후에 배치시켜, 초점거리 등의 조정을 수행할 4극자와, $E{\times}B$ 필터에서 발생하는 2차 수차의 보정을 수행할 6극자의 광학특성의 계산 결과를 보여준다. 4극자-6극자-EXB필터-6극자-4극자 조합의 기본 광학궤도 계산 결과는 빔 다이어그램으로 보여준다. 6극자에 의해 수차를 줄여서 향상되는 에너지 분해능 값은 수치적으로 추정한다. 실제 제작이 된 각 부품의 외형 및 사진을 보여주어 에너지 필터의 제작 진행 상황을 보고한다.

• Proceedings of the KAIS Fall Conference
• /
• 2002.05a
• /
• pp.106-108
• /
• 2002

반도체 physical layout design rule이 작아짐에 따라 Proximity effect와 overlay가 Pattern 구현에 크게 영향을 미치고 있다. Metal layer와 contact의 부족한 overlay margin으로 overlay 불량이 발생하고, 감소한 space margin으로 인해 bridge와 같은 문제가 나타난다. 따라서, resolution을 향상시키고, 최소한의 overlay margin을 확보함으로써 미세 pattern의 구현을 가능하게 한다. 이를 위해 OPC와 attPSM 같은 분해능향상기술이 사용된다. 그러나 attPSM의 사용은 원하지 않는 pattern이 생성되는 sidelobe와 같은 문제가 발생한다. 따라서 serial image simulation올 통해 추출한 rule을 rule-based correction에 적용하여 sidelobe현상을 방지한다. 그리고 overlay margin 부족으로 나타나는 문제는 metal layer와 contact overlap되는 영역의 line edge를 확장하고, rule checking을 통해 최소한의 space margin을 확보하여 해결한다 따라서 overlay error를 rule-based correction을 사용하여 효과적으로 방지한다.