• The Journal of the Korea Contents Association
• /
• v.9 no.12
• /
• pp.322-331
• /
• 2009

In clinical SPECT, FWHM provides quality information of the images obtained under different observing conditions. Therefore, the purpose of this study was to determine the optimum cut off level with comparison of FWHM according to cut off levels in each filter - Band limited, Sheep-Logan, Hanning, Hamming, Low pass cosine, Parazen and Butterworth filter in a SPECT camera. I recorded images along the X, Y, Z-axis with 99mTcO4 point source and measured FWHM with profile curves. In conclusion, all filters showed the longest figures of FWHM with cut off level 0.4, which has the worst image resolution. The images with cut off level 0.7 showed best image resolution. The shortest average of FWHM in MS2 was $11.07\pm0.07mm$ using the Butterworth filter, in MS3 it was $8.44\pm0.19mm$ through using the Hanning filter.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.2
• /
• pp.153-158
• /
• 2020

In this paper, we studied an algorithm for estimating a desired target by removing noise and interference in a wireless communication environment. When an information signal with a mixture noise and interference receive a receiver, noise and interference signals must be removed to accurately estimate a desired target. In order to divide the received signal region into two spatial, a power spectrum is obtained by analyzing a correlation matrix, covariance, eigen vector, and eigen value. The proposed spectrum is an algorithm that can remove noise and interference, and analyzes the existing algorithm and target estimation performance through simulation. As a result of simulation, the target estimation resolution of existing algorithm is more than 10°, but the resolution of the proposed algorithm is less than 10°. The proposed algorithm has improved the resolution of about 5° than the exiting algorithm. The proposed algorithm proved that the target estimation accuracy and resolution are superior to the existing algorithm.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.16 no.4
• /
• pp.234-240
• /
• 1997

We studied the resolution enhancement of a novel scanning laser acoustic microscope (SLAM) using transverse waves. Mode conversion of the ultrasonic wave takes place at the liquid-solid interface and some energy of the insonifying longitudinal waves in the water will convert to transverse wave energy within the solid specimen. The resolution of SLAM depends on the size of detecting laser spot and the wavelength of the insonifying ultrasonic waves. Science the wavelength of the transverse wave is shorter than that of the longitudinal wave, we are able to achieve the high resolution by using transverse waves. In order to operate SLAM in the transverse wave mode, we made wedge for changing the incident angle. Our experimental results with model 2140 SLAM and an aluminum specimen showed higher contrast of the SLAM image in the transverse wave mode than that in the longitudinal wave mode.

• Korean Journal of Optics and Photonics
• /
• v.15 no.5
• /
• pp.429-434
• /
• 2004

An ophthalmic endoscope which is used in medical applications should have the total diameter less than 1 mm. Its image resolution is limited to 30∼40 lp/mm. Therefore, the image resolution is one of the most important factors to decide image quality of the ophthalmic endoscopic images. This study obtained high resolution and magnifying ophthalmic endoscopic images by a new optical design using a 0.23 pitch GRIN lens and high resolution fiber-optic image guide which has less than 5 ${\mu}{\textrm}{m}$ diameter microfibers. The resolutions of images from existing and from a new type of ophthalmic endoscope are measured and compared using a USAF resolution target.

• Journal of Wetlands Research
• /
• v.12 no.1
• /
• pp.23-31
• /
• 2010

Chlorinated aliphatic hydrocarbons (CAHs) such as tetrachloroethylene (PCE), 1,1,1-trichloroethane (1,1,1-TCA) are the contaminants most frequently found in soil and groundwater. They have a potential to be toxic to and persistent in environment. This study is focused on selection of zero-valent metal and ores for the removal of high concentration PCE or 1,1,1-TCA and mixture of two compound. For the screening of suitable metals, we measured dechlorination rate, removal capacities and economics by using batch reactor test. This results suggest that removal rate and dechlorination of high quality iron and zinc are higher than slag and nature ores like zinc and manganese. Among nature ores, zinc ores(64% purity) have highest removal capacities. And in economics zinc ores is 10 times better than high quality metal tested. We conclude zinc ore is most suitable metal for the removal of PCE or 1,1,1-TCA.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.563-563
• /
• 2013

신업플라즈마에서는 라디컬 밀도와 플라즈마 변수를 독립적으로 제어하기 위해어 펄스파워 소스를 사용하고 있다. 펄스플라즈마에서는 플라즈마 상태가 매우 빨리 변한다. 따라서 고시간 분해능으로 플라즈마를 진단하는 방법이 필요하다. 고전적인 단일 랑뮤어 탐침법을 이용하여 펄스 플라즈마를 진단할 경우 수시간 정도의 매우 오랜 시간이 걸리지만 본 연구에서 제안한 방법을 이용하면 수 마이크로 초의 고시간 분해능을 가지면서 수 초내로 측정이 가능하다. 기본 원리는 부유고조화파를 이용하며 고시간 분해능으로 얻기 위해서는 측정된 전류를 인가한 주파수의 주기 단위로 분할하고, 마이크로 시간 단위로 분할된 데이터를 각각 Fourier Transform 하여 전자온도와 밀도를 얻는다. 이 방법을 이용하여 구한 플라즈마 변수 값들은 랑뮤어 방법으로 구한 것과 비교하여 잘 일치하는 결과를 얻을 수 있었다.

• Korean Journal of Optics and Photonics
• /
• v.5 no.1
• /
• pp.90-99
• /
• 1994

Picosecond time-correlated single photon counting system and time-resolved luminescence spectrometer were constructed, employing a mode-locked picosecond laser, fast electronics, and microchannel plate tube. It has been shown that the instrument response function critically depends on laser pulse shape, timing jitter and walk of the electronics, and characteristics of detector and amplifier. Correcting time dispersion in the optical system, the best instrument response function obtained appears to be 25 ps, which made it possible to measure the luminescence lifetime with less than 10 ps resolution in the picosecond to microsecond range. range.

• Journal of the Korean Society of Radiology
• /
• v.16 no.1
• /
• pp.67-75
• /
• 2022

The aim of this study is to establish a new QC method that can simultaneously evaluate the resolution of the x/y plane and the z-axis by producing a phantom that can reflect exposure and reconstruction parameter of MDCT system. It was used with Aquilion ONE(Cannon Medical System, Otawara, Japan), and the examination was scanned using of 120 kV, 260 mA, and the D-FOV of 300 mm². It produced new SSP phantom modules in which two aluminum plates inclined at 45° to a vertical axis and a transverse axis to evaluate high contrast resolution of x/y plane and z axis. And it changed factors such as the algorithm, distance from gantry iso-center. All images were reconstructed in five steps from 0.6 mm to 10.0 mm slice thickness to measure resolution of x/y plane and z-axis. The image data measured FWHM and FWTM using Profile tool of Aquarius iNtusion Edition ver. 4.4.13 P6 software(Terarecon, California, USA), and analysed SPQI and signal intensity by ImageJ program(v1.53n, National Institutes of Health, USA). It decreased by 4.09~11.99%, 4.12~35.52%, and 4.70~37.64% in slice thickness of 2.5 mm, 5.0 mm, and 10.0 mm for evaluating the high contrast resolution of x/y plane according to distance from gantry iso-center. Therefore, the high contrast resolution of the x/y plane decreased when the distance from the iso-center increased or the slice thickness increased. Additionally, the slice thicknesses of 2.5 mm, 5.0 mm, and 10.0 mm with a high algorithm increased 74.83, 15.18 and 81.25%. The FWHM was almost constant on the measured SSP graph for evaluating the accuracy of slice thickness which represents the resolution of x/y plane and z-axis, but it was measured to be higher than the nominal slice thickness set by user. The FWHM and FWTM of z-axis with axial scan mode tended to increase significantly as the distance increased from gantry iso-center than the helical mode. Particularly, the thinner slice thickness that increased error range compare with the nominal slice thickness. The SPQI increased with thick slice thickness, and that was closer to 90% in the helical scan than the axial scan. In conclusion, by producing a phantom suitable for MDCT detectors and capable of quantitative resolution evaluation, it can be used as a specific method in the management of research quality and management of outdated equipment. Thus, it is expected to contribute greatly to the discrimination of lesions in the field of CT imaging.

• Proceedings of the KIPE Conference
• /
• 2009.11a
• /
• pp.99-101
• /
• 2009

자동차의 조향 장치에서 연비 절감과 조향성능의 향상을 위해 연구되고 있는 전동식 파워스티어링 시스템은 기존의 유압식에 비해 소음과 진동이 발생하는 단점을 가지고 있다. 이를 감소시키기 위해 토크 리플을 줄이는 것이 관건이고, 토크 리플을 발생시키는 큰 원인 중 하나가 위치 센서 분해능 제한이다. 본 논문에서는 가격 절감을 위해 낮은 분해능의 위치 센서로 전동식 파워스티어링 시스템의 토크 리플을 저감하기 위해 위치 추정 기법을 제안하고, 실험을 통해 이를 검증하였다.

• Korean Journal of Optics and Photonics
• /
• v.10 no.5
• /
• pp.379-385
• /
• 1999

The characteristics of image quality of a color CRT (cathode ray tube) monitor are studied by changing the contrast and brightness levels. The resolution is assessed by SQRI (square root integral) measured at 9 different combinations of the contrast and brightness levels. The chromaticity coordinates and luminances of red-green-blue channels as a function of the digital value are measured at these combinations and the relationships among the constant-channel chromaticity, color gamut, maximum luminance of a white point with the channel independence are analyzed. From the results, the optimized combination of levels is obtained.