• Journal of the KSME
• /
• v.22 no.1
• /
• pp.9-14
• /
• 1982

복합재료를 이용하여 부품제작을 한 후 어떠한 결합방법을 채택할 것인가를 결정할 때 고려해 야할 점을 기계적 결합법과 접착결합법을 비교하여 검토하였다. 기계적 결합은 하중을 많이 받고 분해 및 결합이 자주 예상되는 부품에 채택해야 할 것이며 복합재료의 특성을 고려하여 보강 시에 부착하는 평판의 섬유방향은 가급적 드릴구멍주위를 부드럽게 하여 응력집중을 낮출 수 있으며 하중의 종류에 따라 적층의 섬유방향을 조절함으로서 응력집중을 조절할 수 있다. 드릴 구멍 주위인 파손은 평판의 폭과 구멍의 직경등이 크게 작용함으로 강도해석을 할 경우에 응력 해석을 한 후 허용응력등을 결정해야할 것이다. 접착졀합법은 작업이 간단하나 신뢰도가 떨어지 므로 하중을 많이 받는 구조물에의 사용에 주의를 요하며 설계방법도 매우 다양하게 제안되어 있어 선택함에 있어 하중 환경조건등을 점검해야할 것이다. 접착결합법은 드릴구멍같은 불연속 성을 갖지 않기 때문에 응력집중이 생기지 않으나 접착층의 길이등 기하학적 형상에 따라 다르게 나타남으로 잡착층의 분리가 일어나지 않도록 설계되어야 한다. 특히 복합재료의 이방성인 성 질을 감안하여 접착층에 이웃하는 피접착층의 섬유방향에 주의해야 하며 층간응력이 파손에 미 치는 영향을 고려하여 설계에 임해야 한다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.22 no.4
• /
• pp.299-306
• /
• 2009

Design optimization is a method to find optimum point which minimizes the objective function while satisfying design constraints. The conventional optimization does not consider the uncertainty originated from modeling or manufacturing process, so optimum point often locates on the boundaries of constraints. Reliability based design optimization includes optimization technique and reliability analysis that calculates the reliability of the system. Reliability analysis can be classified into simulation method, fast probability integration method, and moment-based reliability method. In most generally used MPP based reliability analysis, which is one of fast probability integration method, if many MPP points exist, cost and numerical error can increase in the process of transforming constraints into standard normal distribution space. In this paper, multiplicative decomposition method is used as a reliability analysis for RBDO, and sensitivity analysis is performed to apply gradient based optimization algorithm. To illustrate whole process of RBDO mathematical and engineering examples are illustrated.

• Annual Conference of KIPS
• /
• 2004.05a
• /
• pp.1039-1042
• /
• 2004

인터넷 시장의 괄목할만한 성장에 따라 정보 보안에 관한 중요성이 증대되고 있다. 현재 Netscape사의 SSL 프로토콜이 인터넷 상의 정보보호를 위해 사용되고 있지만 한번 연결되면 융통성이나 확장성이 없이 데이터를 처리해야한다는 단점을 가지고 있고, 최근 소프트웨어를 부품화 시켜 조립, 분해가 가능하도록 지원하는 컴포넌트 플랫폼에 대한 호환 API가 없어 이에 대한 도입의 필요성이 증가하였다. 따라서 본 논문에서는 SSL의 기능을 수행하면서 선택적으로 데이터를 암호화할 수 있고, 국내 표준 암호화 알고리즘의 제공이 가능하며, 컴포넌트의 재사용적 측면, 생산성 향상 측면, 비용 절감적 측면을 향상시켜주는 SSL 컴포넌트의 설계 및 구현을 제안하였다.

• Proceedings of the KIEE Conference
• /
• 1999.07b
• /
• pp.847-849
• /
• 1999

본 논문에서는 도립 진자 시스템에 대하여 모델의 불확실성에도 불구하고 수레의 위치가 기준 입력을 추종하는 강건한 2-자유도(two degree of freedom) 제어기를 설계한다. 도립 진자 시스템의 모델 불확실성은 기약 분해 불확실성으로 고려하고, 기준 입력 추종 성능은 도립 진자 시스템의 수레 위치가 원하는 기준 위치로 추종하는 문제를 고려한다. 이러한 강건 안정화와 기준입력 추종사이의 절충 문제를 해결하기 위해서 2-자유도 제어기를 설계한다. 2-자유도 제어기는 프리필터와 피드백 제어기로 구성된다. 설계 절차에 따라 얻어진 제어기는 모의 실험을 통해 그 성능을 확인한다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.6A
• /
• pp.779-788
• /
• 2008

In this present study, the three dimensional shell elements analysis method for exact distortional behavior of multicell trapezoidal box girders subjected to an eccentric loading is proposed. In order to perform the independent distortional analysis using shell elements, it is necessary to calculate exact distortional forces. In this study, the force-decomposition equation for applied eccentric load acting on multicell trapezoidal box girder is derived and the equation based on static force equilibrium and superposition theory decompose the eccentric load to the loads cause flexture, torsion and distortion. So by using this force-decomposition equation and shell element analysis, each behavior can be easily analysis independently. This independent analysis method is very useful to physically understand each major behavior of multicell box girder, especially distortional phenomenon. Furthermore, it may be also very useful for designer to perform the independent distortional analysis for diaphragm design using simple 3D shell elements model without preliminary complex calculation for distortional constants.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.1289-1295
• /
• 2003

Most industrial products nowadays have been manufactured by being made up of many parts what these are made from various kinds of materials. These parts and goods should be disassembled simply and classified easily by material or kinds of parts for the recycling. But it is not so easy to know how to take disassembly ways and those orders must be known and also analyzed the assembled points and directions of the every part. This research presents an design process for recycling that it will be considering whole design process for recycling about easiness of disassembling units as the prior condition to reuse the parts and used material, and to reduce waste parts.

• Journal of Soil and Groundwater Environment
• /
• v.8 no.2
• /
• pp.44-54
• /
• 2003

A kinetic model for evaluating effects of surfactant on the biodegradation of HOC(hazardous organic chemicals) in soil-slurry systems was developed. The model includes the partition of HOC and surfactant, the dissolved-, micellar-, and sorbed-phase biodegradation, the enhanced solubilization of HOC by surfactant addition, and the mass transfer of HOC. Phenanthrene as HOC and Trition X-100, Tergitol NP-10, Igepal CA-720, and Brij 30 were used in the model simulations. The biodegradation rate was increased even with a small micellera-phase bioavailability. The biodegradation was not greatly enhanced due to decreased aqueous HOC concentration by increasing surfactant dose in both cases with and without micellar-phase bioavailability. The effect of sorbed-phase biodegradation on total biodegradation rate was not highly important compared to aqueous- and micellar-phase biodegradation. The model can be applied for surfactant screening and optimal design of surfactant-based soil bioremediation process.

• Journal of Astronomy and Space Sciences
• /
• v.15 no.2
• /
• pp.359-371
• /
• 1998

We present the design specifications and the performance estimation of the FUVS (Far Ultraviolet Spectrograph) proposed for the observations of aurora, day/night airglow and astronomical objects on small satelltes in the spectral range of $900~1750AA$. The design of FUVS is carried out with the full consideration of optical characteristics of the grating and the aspheric substrate. Two independent methods, ray-tracing and the wave front aberration theory, are employed to estimate the performance of the optical design and it is verified that both procedures yield the resolution of $2~5AA$ in the entire spectral range. MDF (Minimum Detectable Flux) is also estimated using the known characteristics of the reflecting material and MCP, to study the feasibility of detection for faint emission lines from the hot interstellar plasmas. The results give that the observations from 1 day to 1 week, depending on the line intensity, can detect such faint emission lines from diffuse interstellar plasmas.

• Proceedings of the KIEE Conference
• /
• 2007.10a
• /
• pp.295-296
• /
• 2007

본 논문에서는 무인화 ATV 엔진 액츄에이터의 시스템 특수성을 고려한 PID 제어기의 설계를 통하여 종방향 구동을 담당하는 DC 모터의 위치제어 성능을 향상시켰다. DC 모터의 문턱 전압과 마찰력으로 인한 데드존(Dead zone)을 고려하였으며, DC 모터에 연결된 액츄에이터 와이어에 의한 복원력에 대한 영향을 최소화 시켰다. 또한 DC모터의 위치를 판별하는 엔코더의 분해능을 감안하여 제어기 설계에 반영하였고, 실험을 통하여 성능을 검증하였다.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.26 no.3
• /
• pp.295-302
• /
• 1990

In this paper, a methodology for the automatic design of the optimal systolic arrays is proposed. Algorithm transformation is the main mathematical tool on which this methodology is based. Also, technique for partitioning algorithm into systolic arrays is presented. Algorithm partitioning is essential when the size of the computational problem is larger than the size of the array. This study results in (a) reduction of the design time of systolic arrays for given algorithms, (b) CRT display of the structures of systolic arrays, and (c) automatic designing of the optimal systolic array by the criteria such as the number of processing elements, bands, and communication paths. The procedure for these results was programmed using HP BASIC language on HP-9836 computer.