• Polymer(Korea)
• /
• v.24 no.4
• /
• pp.488-498
• /
• 2000

Molecular bottle-brush was prepared by hydrogen-bonding between poly(4-vinylpyridine)(P4VP) as main chain and 3-pentadecylphenol (PDP) as amphiphilic side chain. Variation of long period ( $L_{p}$), order-disorder transition temperature ( $T_{ODT}$) and mesomorphic structure of bottle-brush were investigated by changing various mole ratio (x) of pyridine group in P4VP and PDP and molecular weight of P4VP. Upper critical solution temperature (UCST) behaviour was observed. For x 0.8-0.9, maximum critical temperature was found. As molecular weight of P4VP was increased, phase transition occurred at higher temperature. It was found that phase behaviour of the bottle-brush was affected by mobility of P4VP as well as size and regularity of lamellar structure. The $L_{p}$ determined from analysis of crystal structure was in the range of 35 $\AA$ and 40 $\AA$ and was more affected by the molecular weight of P4VP than by mole ratio (x). However, if the molecular weight of P4VP was high, LP value was little affected.ted.d.

• Polymer(Korea)
• /
• v.26 no.2
• /
• pp.218-226
• /
• 2002

For the preparation of high resilience polyurethane (PU) foams with polyether type cell openers which have different ethylene oxide (EO) content, molecular weight and chain structure, the influences of tell opener structure on the kinetics, rheology, structural stability, open cell content and mechanical properties of the obtained foam were investigated. It was observed that urea formation reaction was delayed with the increase of EO content and incorporation of ester linkage in cell opener molecule and was relatively independent on the molecular weight. With the rheological studies, the decreases of viscosity and storage modulus were confirmed for the increase of EO content and molecular weight, so that the resulted foam had low structural stability and high open cell content. The cell opener having ester linkage in molecule exhibited the lowest values of viscosity and storage modulus and the obtained foam has high open cell content. However, the structural stability increased due to the larger intermolecular interaction of ester linkage. The hardness, tensile strength, tear strength and elongation of foam were deteriorated with increase of EO content and molecular weight of tell opener. On the other hand, the cell opener having ester linkage in molecule improved the values of tensile strength, tear strength and elongation.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.42 no.3
• /
• pp.235-245
• /
• 2016

In this study, we examined the effects of various molecular weights (1, 10, 50, 100, 660, and 1500 kDa) of sodium hyaluronate (HA), which were prepared by enzyme hydrolysis, on the collagen synthesis, anti-inflammation and skin absorption. These HA did not significantly affect the viability of human dermal fibroblast Hs68 cells. Among them, 1500 kDa, 50 kDa HA most significantly increased collagen production by 59%, and 50% in the Hs 68 cells, respectively. Whereas 1500 and 660 kDa HA hardly pass through mouse transdermis membrane, lower molecular weights (1, 10, or 50 kDa) of HA showed time-dependent increase in skin permeation. HA of 50 kDa showed highest anti-inflammatory effects by reducing nitric oxide and tumor necrosis factor-${alpha}$ production in the RAW 264.7 cells, comparing to other HA (1, 10, and 100 kDa HA). Recently, there is no report about anti-wrinkle and anti-inflammatory effects and skin permeation of different molecular weights HA (1, 10, 50, 100, 660 and 1500 kDa), which were produced by enzyme hydrolysis. These results suggested that 50 kDa HA can be potent candidates for the development of effective anti-aging and anti-wrinkle cosmetic agents. The results of this study demonstrated that among those HA with different molecular weights, 50 kDa HA showed highest anti-inflammatory activity, significant capability to induce collagen synthesis and high level of skin permeation.

• Journal of the Speleological Society of Korea
• /
• no.75
• /
• pp.9-13
• /
• 2006

자유수산기는 단분자 제조공정으로 분자, 원자 층에서 가공되어 기타 활성입자와 함께 얻어지며, 20% 이상의 고 밀도 질량 비는 양산공정에 중요한 의미를 부여한다. 자유수산기가 선박안정수의 외래침입 생물과 적조처리 및 양식수체 정화에도 효과적인 새로운 처리기술로 선박 안정수에 포함되어 타 지역으로부터 옮겨지는 외래침입생물 처리 방안의 하나로, 강 전리방전 기술을 적용하여 고 밀집 산소와 물분자로부터 고농도 수사자유기(OH: hydroxyl radical)를 전리, 발생시켜서 활성입자를 신속히 확산시켜 비교적 낮은 수산기농도 하에서 유해성침입생물을 사멸 처리하는 환경 친화적 녹색 청정처리방법을 제안하였다.

• The Korean Journal of Rheology
• /
• v.4 no.1
• /
• pp.52-61
• /
• 1992

초고분자량 폴리에틸렌을 파라 크실렌에 녹인 희박 용액에 전단흐름을 가해 섬유를 뽑아내는 방법에 대해 연구하였다. 표면성장이라 불리는 이 방법을 용액내에서 회전하는 rotor 의 표면에 흡착된 젤 층에, 결정성이 강한씨(seed)를 접촉시킴으로써 엉킨 분자쇄들이 전단력에 의해 신장되어 분자의 자유에너지가 증가하도록 하여 연속적으로 고강력, 고탄성 률 결정을 뽑아내게 한 것이다. 이표면성장법으로 섬유를 얻는데 있어서 결정화온도 rotor 속도, 권취속도 및 고분자 농도와 같은 결정화 변수를 변화시키면서 섬유의 물리적 성질에 미치는 영향을 관찰하였다. 이방법으로 섬유를 성장시키면 열역학적 평형온도(118.6$^{\circ}C$) 이상 인 12$0^{\circ}C$에서 성장시켰을 때 133GPa의 인장 탄성계수 3.1%의 절단신도에서 5.04GPa의 고 강력을 갖는 섬유를 얻을수 있었다. 또한 이방법에 있어서는 결정화 온도가 물리적 성질에 가장 큰 영향을 미치는 인자로 작용하였다, 고분자 농도의 영향은 0.7wt.% 이상에선 물리적 성질이 더 이상 개선되지 않았으며 오히려 장력의 증가로 불안정한 성장을 보였다. 또한 0.5wt%이하에서는 젤층의 형성이 둔화됨을 볼수 있었다. 결국 물리적 성질의 측면에서 볼 때 0.5~0.7wt%에서 최적조건을 보여주었다.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.17 no.2
• /
• pp.45-50
• /
• 2008

Molecular flows inside a guide block in the OLED(organic luminescent emitting device) deposition process have been simulated using DSMC(direct simulation Monte Carlo) method. Because the organic materials are evaporated under vacuum, molecules flow at a high Knudsen number of the free molecular regime, where the continuum mechanics is not valid. A guide block is designed as a part of the linear cell source to transport the evaporated materials to a deposition chamber, When solving the flows, the inlet boundary condition is proved to affect significantly the whole flow pattern. Thus, it is proposed that the pressure should be specified at the inlet. From the analysis of the density distributions at the nozzle exit of the guide block, it is shown that the longer nozzle can emit molecules more straightly. Finally, a nondimensionalized mass flow profile is obtained by numerical experiments, where various nozzle widths and inlet pressures are tested.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.285-288
• /
• 2004

자유수산기는 단분자 제조공정으로 분자, 원자 충에서 가공되어 기타 활성입자와 함께 얻어지며, 20% 이상의 고 밀도 질량비는 양산공정에 중요한 의미를 부여한다. 자유수산기가 선박안정수의 외래침입생물과 적조처리 및 양식수체 정화에도 효과적인 새로운 처리기술로 선박 안정수에 포함되어 타 지역으로부터 옮겨지는 외래침입생물 처리 방안의 하나로, 강 전리방전 기술을 적용하여 고 밀집산소와 물분자로부터 고농도 수산자유기(OH: hydroxyl radical)를 전리, 발생시켜서 활성입자를 신속히 확산시켜 비교적 낮은 수산기농도 하에서 유해성침입생물을 사멸 처리하는 환경 친화적 녹색 청정처리방법을 제안하였다.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.5 no.1
• /
• pp.47-55
• /
• 1999

Applications of chitosan are related to molecular weight and degree of deacetylation(DOD) of chitosan completely. The molecular weight and DOD were greatly affected by the concentration of solution time and temperature. The degree of demineralization was not significantly different at $50^{\circ}C\;and\;70^{\circ}C$ after 30 minutes. Deproteinization decreased as process time increased. The nitrogen content was reached to 6.92% after 90 minute at $80^{\circ}C$, which is similar to theoretical nitrogen content of chitin. The DOD was 82.84% after 2 hours reaction and increased as the reaction time increased in the process. Viscosity and molecular weight are increased as recycling number of concentrated NaOH solution increased. Chemical, biological and physical properties of chitosan depend on the DOD and molecular size of the molecule. Tensile strength of the films from acetic acid solutions was between $28.9{\sim}33.6$ MPa and was generally higher than that of the films from lactic acid. Elongation of the films from lactic acid was between $97.0{\sim}109.7%$ and was generally higher than that of the films from the acetic acid. Water vapor permeability of the films prepared from lcetic acid solutions was between $1.9{\sim}2.3ng{\cdot}m/m^2{\cdot}s{\cdot}Pa$ and was generally higher than that of the films from the acetic acid.

• Korean journal of food and cookery science
• /
• v.27 no.3
• /
• pp.11-20
• /
• 2011

The purpose of this study was to investigate the use and perception of adults concerning bokbunja (Rubus coreanus Miquel) products. Self-administered questionnaires were collected from 502 residents in the Daegu and Gyeongbuk area. According to the survey more females in their 20s responded than males (45.2 and 54.8%, respectively). In total, 82.6% of respondents had an income of under 4,000,000 won per month and most were living in the city. The results regarding knowledge about bokbunja products showed that the bokbunja wine score was highest (3.66), and intake frequency showed that over half of the respondents had never eaten bokbunja products. The preference for bokbunja wine by males was higher than that for females, whereas the others products showed higher scores for females than for males. When asked about how they knew about bokbunja products, 37.0% of males and 46.9% of females responded a family member or neighbor. When purchasing bokbunja products, males and females answered that they considered taste, country of origin, and manufacturer, and price. Approximately 48% of the respondents answered that they purchased bokbunja products in the grocery and department store. As a result, popularization of bokbunja products was based on product development and sales promotion, and the product development factor significantly influenced preference for bokbunja products.

• Applied Chemistry for Engineering
• /
• v.16 no.4
• /
• pp.527-532
• /
• 2005

Ionic polymer metal composites (IPMC) are soft polymeric smart materials having large displacement at low voltage in air and water. The polymeric electrolyte actuator consists of a thin and porous membrane and metal electrodes plated on both faces, in impregnation electro-plating method. The response and actuation of actuator are governed. Among many factors governing the activation and response of IPMC actuator, the surface electrode plays an important role. In this study, the well-designed modification of electrode surface was carried out in order to improve the chemical stability well as electromechanical characteristics of the IPMC actuator. We employed Ion Beam Assisted Deposition (IBAD) method to prepare the topologically homogeneous thin surface electrode. After roughing the surface of Nafion membrane in order to get a larger surface area, the IPMC was prepared by impregnation for electro-plating and re- coating on the surface through traditional chemical deposition, followed by an additional surface treatment with high conductive metals with IBAD. It was observed that our IPMC specimen shows the enhanced surface electrical properties as well as the improved actuation and response characteristics under applied electric field.