• Polymer(Korea)
• /
• v.35 no.6
• /
• pp.531-536
• /
• 2011

Homopolymer distribution in block copolymer/homopolymer blends was investigated as a function of homopolymer concentration and homopolymer molecular weight. The deuterated poly(methyl methacrylate) or polystyrene was blended with a deuterated polystyrene-poly(methyl methacrylate) diblock copolymer up to a concentration of 20 wt%. Samples were characterized by small-angle X-ray scattering (SAXS), neutron reflectivity and transmission electron microscopy. The block copolymer with a thin-film geometry formed alternating lamellar microdomains oriented parallel to the substrate surface. By adding the homopolymer, the microdomain structure was significantly disturbed. As a consequence, a poorly ordered morphology appeared when the homopolymer concentration exceeded 15 wt%. Increasing the homopolymer concentration and/or the homopolymer molecular weight caused the microdomains to swell less uniformly, resulting in segregation of the homopolymer toward the middle of the microdomains.

• Journal of the Korean Vacuum Society
• /
• v.12 no.4
• /
• pp.281-287
• /
• 2003

We have performed classical molecular dynamics simulations for hypothetical silicon nanotubes using the Tersoff potential. Our investigation presented a systematic study about the thermal behavior of hypothetical silicon nanotubes and showed the difficulty in Producing silicon nanotubes or graphitelike sheets. Through the investigations on the structure and properties of a double-wall silicon nanotube, we concluded that quasi-one dimensional structures consisting of silicon atoms become nanowires or multi wall nanotubes rather than single wall nanotubes in order to minimize the number of $sp^2$ bonds.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.468-470
• /
• 2008

열중량반응기와 미분반응기를 이용하여 ABS의 열분해 및 생성물분포 특성을 연구하였으며 미분반응기를 이용한 실험의 열분해온도는 $410{\sim}450^{\circ}C$이었다. 각 상의 열분해생성물의 수율은 무게측정을 통해 얻었으며 액상생성물의 탄소수분포는 GC-SIMDIS 방법을 통해 측정하였다. 열중량 분석실험에서는 측정할 수 없었던 다량의 고상잔류물의 생성을 회분식 미분반응기실험을 통해 확인할 수 있었다. 반응온도와 시간이 증가할수록 액상생성물의 수율과 평균분자량은 감소하였으나 액상생성물 중의 스티렌모노머의 생성은 두드러지게 증가하였다. ABS 열분해 반응에서 말단절단의 속도계수인 활성화에너지 값은 54.1kcal/mole이었다.

• Journal of the Korean Chemical Society
• /
• v.42 no.1
• /
• pp.16-21
• /
• 1998

The adsorption of ethane and propane in $K^{+}$ ion exchanged zeolite L has been studied using grand canonical ensemble Monte Carlo simulation. $CH_3$ and $CH_2$ groups of sorbate molecule were considered as pseudoatoms in calculation of potential, and the bond lengths and bond angles within a molecule were fixed during simulation. Average number of molecules per unit cell, number density of molecules in zeolite, distribution of molecules per unit cell, average potential per sorbate molecule, and isosteric heats of adsorption were calculated, and these results were compared with experimental results. For ethane the simulation results agreed considerably well with experimental ones over a wide range of temperature. The average potential of sorbate molecule decreased slowly with the increase of amounts sorbed in zeolite.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.11
• /
• pp.1186-1191
• /
• 2006

Removal efficiency of As(III) through oxidation and adsorption in column reactors was investigated at different ratios of manganese-coated sand(MCS) and iron-coated sand(ICS) : MCS-alone, ICS-alone and both of ICS and MCS. The breakthrough of arsenic immediately occurred from a column reactor with MCS-alone. However, most of the arsenic present in the effluent was identified as As(V) due to the oxidation of As(III) by MCS. While five-times delayed breakthrough of arsenic was observed from a column reactor with ICS-alone. At a complete breakthrough of arsenic, the removed As(III) was 36.1 mg with 1 kg ICS. To find an optimum ratio of ICS and MCS in the column packed with both ICS and MCS, the removal efficiency of As(III) was investigated at three different ratios of ICS/MCS with a fixed amount of ICS. The breakthrough time of arsenic was quite similar in the different ratios ICS/MCS. However, much slower breakthrough of arsenic was observed as the ratio of ICS/MCS decreased. As the ratio of ICS/MCS decreased the concentration of As(III) in the effluent decreased and then showed below 50 ppb at an equal amount of ICS and MCS, suggesting more efficient oxidation of As(III) by greater amount of MCS. When a complete breakthrough of arsenic occurred, the removed total arsenic with an equal amount of ICS and MCS was 68.5 mg with 1 kg of filter material.

• Food Engineering Progress
• /
• v.13 no.4
• /
• pp.335-340
• /
• 2009

This study was performed to analyze changes in the molecular structural and physical properties of modified corn starch, in which particle structure was broken using high impact planetary mill and ultra fine pulverizing techniques. The average diameter and specific surface area of the modditied corn starch after pulverization decreased 50% and increased 567%, respectively. Content of low molecular substances mersured using gel permeation chromatography (GPC) increased from 21.0% to 86.5% after pulverizing corn starch. Damaged starch content also increased from 9.63% to 83.57% after pulverizing corn starch. After pulverization, gel formation capacity corn starch was reduced compared to that of control by structure breakdown.

• Analytical Science and Technology
• /
• v.12 no.4
• /
• pp.306-311
• /
• 1999

Changes of silk protein compositions of average molecular weight (Mw) and free amino acid composition to different solubility conditions were studied by SDS-polyacrylamide electropholesis, gel permeation chromatography (GPC), and free amino acid analysis method. We can not detected average molecular weight distribution of different hydrochloric acid (HCl) conditions as SDS-polyacrylamide method, but as using GPC method, molecular weight distribution of 2N-HCl, 1N-HCl and 0.5N-HCl (3 hrs at $110^{\circ}C$ treated) are confirmed Mw 800, 1,500 and 3,700, respectively. The average molecular weight of calcium chroride and calcium chloride-enzyme treated samples are shown Mw 46,800 and 12,500, respectively. The degree of hydrolysis and the composition of the free amino acid in the fibroin hydrolysates effected significantly composition of free amino acids of the fibroin powder. The increase of the degree of hydrolysis and ratio of free amino acids and oligopeptides were found to be directly related to the concentration of hydrochloric acid and treatment of enzyme, resulting in the increase of water solubility.

• Applied Biological Chemistry
• /
• v.38 no.6
• /
• pp.554-562
• /
• 1995

Effect of the modification of rice protein by protease and 2-mercaptoethanol on physicochemical and gelatinization properties was investigated for the three cultuvars of rice. Total amylose contents of Chucheongbyeo(japonica type), Chosengtongilbyeo(tongil type, indica x japonica) and IR 36 (indica type) were in the range of $20{\sim}25%$. Total amylose and insoluble amylose content of IR 36 were higher than the others. The differential scanning calorimetric and X-ray diffraction results revealed higher relative crystallinity of IR 36 than the others. Water uptake was increased and amylographic viscosity was significantly decreased by 2-mercaptoethanol treatment. Amylographic viscosity was significantly decreased and hot water-soluble carbohydrate content was increased by protease treatment. The proportions of high molecular weight of soluble carbohydrate fractionated by gel filtration chromatography were increased by protease treatment. These effects were most significant in IR 36. This results suggested that starch gelatinization be accelerated by alteration of the protein with protease and reducing agent.

• Applied Biological Chemistry
• /
• v.51 no.4
• /
• pp.276-280
• /
• 2008

To elucidate the effects of ultraviolet (UV) irradiation on molecular properties of ovalbumin, the molecular weight profile, secondary structure and tertiary structure of proteins were examined after irradiation by UV with 254 nm wavelength for 4, 8, 16 and 32 hrs, respectively. UV irradiation of protein solution caused the disruption on the native state of protein molecules. SDS-PAGE and gel permeation chromatography indicated that radiation caused initial fragmentation of polypeptide chains and as a result subsequent aggregation due to cross-linking of protein molecules. Circular dichroism (CD) study showed that UV irradiation caused the change on the secondary structure resulting in decrease of helical structure or compact denature on structure of protein depending on irradiation period. Fluorescence spectroscopy indicated that irradiation quenched the emission intensity excited at 280 nm. These results suggest that UV irradiation affect the molecular properties of ovalbumin and may have potential as a means to change the antigenicity of protein allergen.

• Polymer(Korea)
• /
• v.31 no.6
• /
• pp.461-468
• /
• 2007

In order to understand the structure of the existing aggregate in the nanocomposite, which has been prepared with polyester and trisilanolisobutyl polyhedral oligomeric silsesquioxane(TBPOSS), laser light scattering(LLS) and SEM-EDS were applied to its 1,1,1,3,3,3-hexafluoro-2-propanol solution and original sample, respectively. Although aggregate particles appeared as spherical shape of the average diameter of 120 nm in SEM image, they were not microgels but almost linear copolymer chains ($M_w=2.3{\times}10^6\;g/mol$) alternating 320 molecules of TBPOSS with polyester subchains. It has been microphase-separated from the matrix polyester due to the difference of chemical composition. As the matrix, polyester chain of $M_w=4.0{\times}10^4\;g/mol$ had averagely 2.5 molecules of TBPOSS per chain. It is also found that about 93% of total TBPOSS molecules existed in matrix phase and the residual 7% in spherically aggregated phase.