• Annual Conference on Human and Language Technology
• /
• 2012.10a
• /
• pp.113-116
• /
• 2012

UTagger는 한국어 의미 처리를 위해 개발된 형태소분석기이며 의미 분열 기능도 가지고 있다. 정확률이 매우 높고 다앙한 기능을 갖추고 있으나 이전에 개발된 다른 형태소 분석기에 비하여 속도가 느리다는 단점을 가지고 있었다. 형태소 분석기의 빠른 속도는 많은 분야에서 요구되고 있기 때문에 본 논문에서는 UTagger의 정확률을 유지하면서 속도를 향상시키는 캐시(Cache) 방법과, 정확률을 조금 낮추면서 향상시키는 다앙한 방법들을 제시한다. 또한 상황에 따라 적합한 방법을 선택할 때 참조가 되도록 하기 위해 각 방법들 실험 결과를 정리한다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.11a
• /
• pp.217-220
• /
• 2009

This paper presents experimental results of Recess Characteristic of Swirl Coaxial Injector of fuel-rich gas generators. It was revealed that the internal impinging phenomenon played an important role in the spray characteristics, such as spray angle and breakup length.

• Journal of ILASS-Korea
• /
• v.19 no.4
• /
• pp.167-173
• /
• 2014

The spray characteristics of Gas-Centered Swirl Coaxial Injector was investigated that there were different characteristics with or without gas flow. As gas flow was accelerated, the momentum of gas was transferred to the momentum of liquid in the low liquid Reynolds number. Therefore, the axial velocity of liquid was increased and the measured value was smaller than without gas flow. However, in the high momentum flux ratio, the momentum transfer hardly occurred and the results had constant values. As the recess length was increased, the mixing area of gas and liquid also was increased, the results were decreased.

• Journal of ILASS-Korea
• /
• v.15 no.3
• /
• pp.109-114
• /
• 2010

The implementation of gelled propellants systems offers high performance, energy management of liquid propulsion, storability, and high density impulse of solid propulsion. The present study focused on the macroscopic spray characteristics of liquid sheets formed by triplet impinging jets of non-Newtonian liquids which are mixed by Carbopol 941 0.5%wt. The results are compared to experiments conducted on spray images which formed by triplet impinging jets concerning with airassist effect at center orifice. When gel propellants are injected by doublet impinging jets at low pressure and high pressure, closed rim pattern shape appeared by polymeric effect from molecular force and showed inactive atomization characteristics, because of extensional viscosity related by restriction of atomization process and breakup time delay of turbulence transition. As increasing mass flow rate of the air(increasing GAR), spray breakup level is also increased.

• Journal of ILASS-Korea
• /
• v.7 no.1
• /
• pp.29-35
• /
• 2002

This study describes the external spray characteristics of deflector nozzle such as the breakup procedures of liquid sheet, spray angle, breakup length and bubble behaviors of spray at deflector nozzle. In order to visualize the spray behaviors shadow graphy technique were used. According to the increase injection pressure, deveopment of the spray passes through the dribbling, distoted jet, closed bubble due to the contraction by form a conical sheet like as the simplex swirl atomizer. As trying the analysis of the ratio of bubble length and width it was found that the ratios is comparable. Spray cone angle was nearly $90^{\circ}$.

• Proceedings of the Korean Society of Fisheries Technology Conference
• /
• 2001.10a
• /
• pp.235-236
• /
• 2001

김 (Porphyra species)은 양식기술의 진보와 더불어 생산량이 급격히 증가되었으나, 지나치게 과도한 저 품질의 생산과 품종간 교잡으로 인해 점차 열성화 되는 현상이 나타나고 있다. 따라서 우리나라 고유의 맛과 향을 지니고 있으며, 지역특성에 적합한 한국 고유종의 개발과 품종개량이 절실히 요구된다. 김 속 식물은 세포층수, 세포당 엽록체수, 정자낭반의 형태, 정자낭 및 과포자낭 분열형식, 무성포자의 형성유무, 각포자체의 형태 및 생태적 특성 등을 종합하여 분류하였으며 (Kurogi 1972) 거치상돌기의 유무도 김의 주요 식별형질로 다루어져 왔다 (Miura 1988). (중략)

• Journal of ILASS-Korea
• /
• v.4 no.4
• /
• pp.30-37
• /
• 1999

The breakup characteristics of liquid sheet formed by the liquid rocket injector has a close relation with the combustion efficiency. In this paper, basic characteristics of droplet size and velocity distribution were measured with PDPA for the Like Doublet Impinging Injector. Test variables were the angle of impact, the diameter of orifice and jet velocity. Water was used as test fluid. As a result, for impingement angle less than 90 degree, following correlations were obtained between drop size and design parameters : $D_{32}({\mu}m)=295.0{\times}V^{-0.09}\times(2\theta)^{-0.1}{\times}d^{0.072}$. For impingement angle greater than 100 degree, drop sizes were increased but eventually converged to a certain limiting value.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.395-398
• /
• 2010

감압비등에 의한 미립화는 더 미세한 직경의 액적을 얻을 수 있고, 분무각이 증가하며, 더 좋은 혼합특성을 갖는 다는 점에서 단순 압력식 미립화와 차이가 난다. 감압비등이란 과열된 액체를 포화 압력 이하의 대기 중으로 분사하여 급격한 비등에 의해 이루어지는 미립화이다. 본 연구는 금속 연료를 이용한 추진기관의 산화제인 물 공급기술에 감압비등과정을 이용한 와류분무를 적용시키기 위해 수행됐다. 분열길이와 같은 거시적 특성은 Charge-Couple Device(CCD) 카메라를 이용해 측정하였고, Sauter Mean Diameter(SMD)와 SMD분포와 같은 미시적 특성은 Global Sizing Velocimetry(GSV) 시스템을 이용해 측정했다. 실험은 압력과 온도, 대류 속도를 변화시키며 진행했다.

• Journal of ILASS-Korea
• /
• v.26 no.1
• /
• pp.9-17
• /
• 2021

Six shear coaxial injectors with different recess length and taper angle were manufactured. Cold-flow tests on the injectors were performed at room temperature and pressure using water and air as simulants. By changing the water mass flow rate and air mass flow rate, spray images were taken under single-injection and bi-injection. Breakup length and spray angle were analyzed from instantaneous and averaged spray images using image processing techniques. For all the injectors, the breakup length generally decreased as the momentum flux ratio increased at the same gas mass flow rate. The injectors with 7.5° taper angle usually had the longest breakup length and the smallest spray angle. When the taper angle was 15° or more, it hardly affected breakup length and spray angle. The recess length did not influence breakup length but its effect on spray angle depended on the taper angle.

• Korean Journal of Biological Psychiatry
• /
• v.3 no.1
• /
• pp.88-95
• /
• 1996

In an open labeled study, two fixed doses of nimodipine(45mg and 90mg daily) were added to the usual antipsychotic drug treatment (Haloperidol : mean dose=25mg/day) in 20 male chronic schizophrenics for 5 weeks. The purposes of this study were to evaluate the therapeutic effects and the effect an the changes of plasma homovanillic acid(HVA) and 5-hydroxyindoleacetic acid(5-HIAA) levels. The results were as follows : 1) Total BPRS score and thought cluster, paranoid cluster subscores showed linear decreasing trend over the course of the study(P<0.05). Especially the thought cluster and paranoid cluster subscores were significant difference between 45mg and 90mg dose of nimodipine(P<0.05). The improvement rates were 45,45% of 90mg and 11.11% of 45mg, but there was no significant difference between the 45mg and 90mg dose of nimodipine. 2) The scores of extrapyramidal symptoms and adverse events-somatic symptoms showed a linear decreasing trends over the course of study. 3) The changes in the mean plasma HVA and 5-H1AA concentrations by the dosages and durations of combining of nimodipine were not statistically significant. 4) There was no statistical significance in plasma HVA and 5-HIAA of the improved, non-improved goroup. Nimodipine has a possibility os on adjunctive agent for treatment resistant schizophrenics, elderly patients and liable patients for the Side effects to usual antipsychotic drugs. So we suggest that the dosage of nimodipine must be above 90mg/day in the treatment of schizophrenia.