• Title/Summary/Keyword: 분산 성분 모형

Search Result 51, Processing Time 0.028 seconds

Simulation of Nitrogen Movement in the Rainfall Event at an Upland Agricultural Watershed (임야지에서 강우사상시 질소거동 모의에 관한 연구)

  • Kim, Sang-Hyeon;Kim, Geon-Mok
    • Journal of Korea Water Resources Association
    • /
    • v.34 no.5
    • /
    • pp.521-532
    • /
    • 2001
  • The propagation patterns of nitrogen during rainfall events are unsteady and heterogeneous due to the characteristics of generation and transport mechanisms. A simulation of non point source pollution was performed using GRASS-AGNPS to examine efficient management methods for diffusive pollution. Digital Elevation Model(DEM) was prepared to estimate the impact of topography on the transport pattern of diffusive pollutant Hanjaechon watershed on the Kyungbook province was selected as a study ares. Water quality samples were collected and analyzed for the calibration of the model. A heuristic approach was employed to improve the model performance. The model could successfully produce spatial distributions of nitrogen. The constructed map-layers may help to decision makers to determine the best management practices.

  • PDF

Modeling of the Failure Rates and Estimation of the Economical Replacement Time of Water Mains Based on an Individual Pipe Identification Method (개별관로 정의 방법을 이용한 상수관로 파손율 모형화 및 경제적 교체시기의 산정)

  • Park, Su-Wan;Lee, Hyeong-Seok;Bae, Cheol-Ho;Kim, Kyu-Lee
    • Journal of Korea Water Resources Association
    • /
    • v.42 no.7
    • /
    • pp.525-535
    • /
    • 2009
  • In this paper a heuristic method for identifying individual pipes in water pipe networks to determine specific sections of the pipes that need to be replaced due to deterioration. An appropriate minimum pipe length is determined by selecting the pipe length that has the greatest variance of the average cumulative break number slopes among the various pipe lengths used. As a result, the minimum pipe length for the case study water network is determined as 4 m and a total of 39 individual pipe IDs are obtained. The economically optimal replacement times of the individual pipe IDs are estimated by using the threshold break rate of an individual pipe ID and the pipe break trends models for which the General Pipe Break Prediction Model(Park and Loganathan, 2002) that can incorporate the linear, exponential, and in-between of the linear and exponetial failure trends and the ROCOFs based on the modified time scale(Park et al., 2007) are used. The maximum log-likelihoods of the log-linear ROCOF and Weibull ROCOF estimated for the break data of a pipe are compared and the ROCOF that has a greater likelihood is selected for the pipe of interest. The effects of the social costs of a pipe break on the optimal replacement time are also discussed.

공생별 Z And의 특이 분광선 연구

  • Lee, Seon-A;Hyeong, Sik
    • 한국지구과학회:학술대회논문집
    • /
    • 2010.04a
    • /
    • pp.120-120
    • /
    • 2010
  • 두 개의 별로 구성되었을 것이라고 여겨진 공생별은 밝기변화는 궤도운동에 따라 밝기가 변하는 것으로 알려졌다. 분광 관측 자료에는 이러한 궤도 변화 외에도 다양한 요소가 밝기 변화에 관여하는 것이 특성으로 나타난다. 또한 공생별은 밝기가 급격하게 증가하고 혹은 감소하기도 하는데, 이는 폭발에 기인하는 것으로 판단된다. 이러한 변화, 궤도 운동에 따라 기하학적 변화와 폭발 현상을 모두 볼 수 있는 대표적인 공생별이 Z And이다. 우리는 선행연구(MIKOLAJEWSKA & KENYON, 1996)에서 발표한 저분산 분광 자료를 이용하여 위상별로 변하는 상대적 선세기 변화를 조사하였다. MIKOLAJEWSKA & KENYON (1996)의 자료는 저분산 기기로(${\Delta\lambda\sim}3{\AA}$), HeI, HII, [OIII]5007, [NeV]등이 관측되었는데, 이러한 선들의 세기를 광이온 모델을 이용하여 예측한 후, 공생별 가스를 이온화시킨 중심별(WD)의 물리적 특성을 연구하였다. 또한 Hyung & Aller가 2002년 8월 12일 Lick Observatory에서 Hamilton Echelle Spectrograph (HES)를 사용하여 3600초 노출 관측한 고 분산 분광자료(${\Delta\lambda\sim}0.1{\AA}$)도 분석하였다. HES 관측 자료는 공생별의 위상이 $\Phi$=0.22이며, HES자료는 $3470{\AA}-9775{\AA}$에서 HI, HII, HeI, HeII, NII, NIII, OII, [OI], [OII], [OIII] 등이 있었다. 이 선들의 선 윤곽을 IRAF와 StarLink/Dipso를 이용하여 분석하고, 각 성분이 위상($\Phi$=0.22)인 상태에서의 관측자에 대해 어떠한 기하학적인 구조를 가지고 있는지 연구하였다. CLOUDY를 사용하여 광 이온 모형성운을 만들어 화학원소 및 성운가스의 물리적 조건을 연구하였다. Z And의 수소의 수밀도($N_H$)는 $10^{8.5}/cm^3$으로 가정하였다. 중심별 온도는 약 110,000K, 광도는 태양의 2000배로 추정되었다.

  • PDF

Stochastic Modelling of Monthly flows for Somjin river (섬진강 월유출량의 추계학적 모형)

  • 이종남;이홍근
    • Water for future
    • /
    • v.17 no.4
    • /
    • pp.281-291
    • /
    • 1984
  • In our Koreans river basins there are many of monthly rainfall data, but unfortrnately streamflow data needed are rare. Analysing monthly rainfall data of Somjin river basin, the stochastic theory model for calculation of monthly streamflow series of that region is determined. The model is composed of Box & Jenkins stansfer function plus ARIMA residual models. This linear stochastic differenced time series equation models can adapt themselves to the structure and variety of rainfall, streamflow data on the assumption of the stationary covarience. The fiexibility of Box-Jenkins method consists mainly in the iterative technique of building an AIRMA model from observations and by the use of autocorrelation functions. The best models for Somjin river basin belong to the general calss: $Y_t=($\omega$o-$\omega$_1B) C_iX_t+$\varepsilon$t$ $Y_t$ monthly streamflow, $X_t$ : monthly rainfall, $C_i$ :monthly run-off, $$\omega$o-$\omega$_1$ : transfer parameter, $$\varepsilon$_t$ : residual The streamflow series resulted from the proposed model is satisfactory comparing with the exsting streamflow data of Somjin gauging station site.

  • PDF

Numerical Simulation of Irregular Waves Over a Shoal Using Parabolic Wave Model (포물형 파랑모형을 이용한 수중천퇴상 불규칙파의 수치모의)

  • 윤성범;이정욱;연영진;최병호
    • Journal of Korean Society of Coastal and Ocean Engineers
    • /
    • v.13 no.2
    • /
    • pp.158-168
    • /
    • 2001
  • A numerical model based on the wide-angle parabolic approximation equation is developed for the accurate simulation of the directional spreading and partial breaking of irregular waves. This model disintegrates the irregular waves into a series of monochromatic wave components, and the simultaneous calculations are made for each wave component. Then, the computed wave components are superposed to get the wave height of irregular waves. To consider the partial breaking of irregular waves in the computation the amount of energy dissipation due to breaking is estimated using the superposed wave height. The accuracy of the developed model is tested by comparing the numerical results with the experimental measurements reported earlier. In the case of non-breaking waves a considerable accuracy of the model is observed for both regular and irregular waves. On the contrary it is found that the accuracy is significantly degenerated for the case of breaking waves. Some analyses for the accuracy degeneration are presented.

  • PDF

Evapotranspiration analysis of a Mixed Forest and a Rice Paddy (혼효림과 논에서의 증발산량 특성 분석)

  • Lee, Jung-Hoon;Lee, Yeon-Kil;Jung, Sung-Won;Kwon, Hyou-Jung
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2011.05a
    • /
    • pp.302-302
    • /
    • 2011
  • 수문 순환 및 물 수지에 관한 연구는 강수량, 지표유출량, 지하수, 토양수분 및 증발산량에 대한 정량화가 이루어질 때 실제적으로 규명될 수 있다. 그러나, 수문 순환 및 물수지 평가에 중요한 부분을 차지하는 증발산량의 경우 관측값보다 단순한 가정이나 경험식에 의한 추정값을 사용하고 있어 그 자료의 신뢰성에 대해서도 꾸준히 문제가 제기되어 왔다. 또한 수문 순환과 관련하여 실제 관측되고 있는 성분은 대개 기상 변수에 국한되어, 모형 검증에 필요한 증발산량 관측이 거의 없는 실정이다. 따라서 수문 순환 및 물수지의 정량적인 분석을 위해 수문 순환 과정에서 상당부분을 차지하는 증발산량의 측정이 필요한 실정이다. 본 연구는 국토해양부의 기초수문자료 구축사업의 일환으로 수행되었으며, 에디공분산 기술을 사용하여 한반도의 대표적 식생 기능 형태인 혼효림(설마천 유역, 2007년 8월부터)과, 논경지(청미천 유역, 2008년 8월 부터)에서의 증발산량 측정을 수행하였다. 그 결과 두 지점에서의 증발산량의 계절 및 연 변동 특성을 파악할 수 있었다. 혼효림(설마천 유역)에서 산정된 증발산량은 2008년 507mm, 2009년 440mm, 2010년 491mm이고, 논경지(청미천 유역)에서 산정된 증발산량은 2009년 554mm, 2010년 609mm의 값을 보였다.

  • PDF

Application of Drone for Analysis of 2D Pollutant Mixing in River (하천에 유입된 오염물질의 2차원 혼합 분석을 위한 드론의 활용)

  • Seo, Il Won;Baek, Donghae
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2017.05a
    • /
    • pp.100-100
    • /
    • 2017
  • 하천에 유입된 오염물질의 2차원 혼합거동은 하천 주흐름에 의한 이송현상과 유속 성분의 수심평균 값에 대한 공간적 편차로부터 야기되는 분산현상으로 설명 할 수 있다. 이는 3차원 이송확산 방정식으로부터 수심 적분된 2차원 이송-분산 방정식으로 수학적 유도가 가능하며, 수심방향으로 적분하는 과정에서 발생되는 농도의 분산항은 Taylor Dispersion 개념에 기초하여 종방향 및 횡방향의 2차원 분산계수로 표현된다. Fischer(1978)는 연직방향 유속분포로부터 2차원 분산계수를 추정하는 해석해를 수학적으로 유도하였으나, 실제 하천에서 정밀한 연직방향 유속분포를 계측하는 것은 많은 비용 및 노동력을 초래한다. 따라서 선행 연구자들은 2차원 혼합모형의 분산계수를 산정하고자 실험적 방법으로써 추적자실험을 수행하였다. 추적자실험은 추적자 물질을 수체에 주입한 후 농도의 변화를 관측함으로써 추적자물질이 하천에서 이송 및 분산되는 과정을 이해하는데 유용하다. 기존의 추적자실험은 고정된 위치에서 농도를 계측하여 시계열적인 농도의 변화를 관측한 후, 오염운 동결가정을 통해 종,횡방향 분산계수의 산정이 가능하지만, 오염물질 농도의 공간적 분포를 얻기에는 한계가 있다. 본 연구에서는 기존의 추적자실험법의 한계를 극복하고자 형광물질을 이용한 추적자실험을 수행함과 동시에 드론에 장착된 디지털카메라를 이용하여 항공영상을 취득 및 분석하여, 하천에 주입된 형광물질의 농도분포를 시공간적으로 추출하는 기법을 개발하고, 이를 바탕으로 오염물질의 2차원 혼합거동을 분석하였다. 본 실험은 한국건설기술연구원의 안동하천실험센터의 A3실험수로에서 수행되었으며, 실험수로는 평균 하폭 5 m, 평균 수심 0.44 m, 유량 $0.96m^3/s$의 실제 소규모 하천과 유사한 축척을 가지고 있다. 추적자물질은 Rhodamine WT 용액이 사용되었으며, 실험수로 내 설치된 15개의 형광광도계(YSI-600OMS)를 이용하여 농도를 측정하였다. 항공영상의 취득을 위해 이용된 드론은 DJI-Phantom 3 Professional 이며, 3840x2160의 해상도로 초당 30 frame의 동영상으로 취득되었다. 영상의 정합 및 좌표화를 위해 RTK-GPS를 이용하여 12개의 지상 기준점의 좌표를 취득한 후, 사영변환을 통해 영상좌표를 지상좌표로 변환하였다. 영상의 픽셀값을 농도장으로 변환하기 위해 각 RGB 밴드의 픽셀값을 통계적으로 분석하여 농도장으로 변환하였으며, 영상으로부터 얻은 농도장은 형광광도계에 의해 실측된 농도와 결정계수 0.9이상의 수준으로 정확도를 나타냈다.

  • PDF

FINITE ELEMENT ANALYSIS OF MANDIBULAR STRESSES AND DENTURE MOVEMENTS INDUCED BY VARIOUS DENTURE BASE MATERIALS (의치상 재료에 따른 하악응력 및 의치의 변위에 관한 유한요소법적 분석)

  • Chung, Chae-Heon;Yoon, Chang-Keun
    • The Journal of Korean Academy of Prosthodontics
    • /
    • v.25 no.1
    • /
    • pp.281-302
    • /
    • 1987
  • 의치상 재료 종류에 따라 의치, 점막 및 하악골에 발생되는 변위 및 응력을 연구하기 위하여 컴퓨터를 이용한 수치적 해석인 2차원 유한 요소법을 이용하였다. 2차원 유한 요소 모형으로선 표준 크기의 하악골 및 의치를 고려하여 231개의 사변형 요소 및 268개의 절점으로 분할한 후 각 구성 성분의 물리적 성질인 탄성률 및 프와송비를 대입시켰다. 사용된 의치로서는 일반 합성수지의치, 2mm후경의 탄성재를 의치상 하부에 이장한 합성수지의치, 2mm후경의 탄성재를 치아와 의치상 중앙에 삽입한 합성수지의치 및 0.5mm후경의 금속상의치의 4종류였으며, 하중시에 하악의 고정 부위로선 생체와 동일 조건을 부여하기 위하여 교근, 내측익돌근, 측두근등의 하악 폐구근이 부착되는 하악각 부위 및 하악 근돌기 부위의 16절점을 고정점으로 하였다. 하중 조건으로선 하악 제1대구치의 일점에 10kg의 수직 집중하중, 하악 중절치의 일점에 7kg의 수직 집중하중 및 하악 제 1소구치로 부터 하악 제2대구치까지의 교합면에 10kg의 수직 분산하중을 부여하여 분석한 결과는 다음과 같다. 1. 하중이 의치 교합면위의 가해진 부위에 따라 다양한 의치 회전 및 강하 현상을 보였으며, 탄성재를 이장 및 삽입한 합성 수지 의치의 변위가 일반 합성수지의치 및 금속상 의치의 변위보다 더 컸다. 2. 주응력을 고려할때 점막 부위에는 주로 압축 응력이 작용하였으며 치조제 부위는 압축응력과 인장 응력이 함께 작용하였다. 3. 탄성재를 삽입한 합성수지의치에 최고 등가 응력이 집중되었으며 그 다음은 탄성재를 이장한 합성수지의치, 일반 합성수지의치의 순이였으며 금속상의 경우는 금속을 따라서 높은 등가 응력이 넓게 분산되었다. 4. 의치상 종류에 관계없이 동일 하중 조건하에선 점막에 나타나는 등가 응력의 크기 및 분산양태는 유사하였다. 5. 하악골에서 등가 응력은 의치지지 부위에만 국한되지 않고 넓게 분산 되었으며 의치상 종류 및 하중 조건에 관계없이 치조제 후방 및 하악연의 후방 부위에 특히 높은 등가응력이 집중되었다. 6. 하악 중절치의 일점에 수직 하중을 가한 경우가 다른 하중 조건에 비하여 지지점과의 거리차이로 인하여 하악골에 가장 높은 등가 응력을 유발하였다. 7. 의치상 재료에 따른 하악 골에 발생되는 응력의 크기 및 분산에는 큰 차이가 없으나 금속상의 경우가 교합압을 분산하는데는 효과적이었다.

  • PDF

Estimation of Variance Component and Environment Effects on Somatic Cell Scores by Parity in Dairy Cattle (젖소집단의 산차에 따른 체세포점수의 환경효과 및 분산성분 추정)

  • 조광현;나승환;서강석;김시동;박병호;이영창;박종대;손삼규;최재관
    • Journal of Animal Science and Technology
    • /
    • v.48 no.1
    • /
    • pp.39-48
    • /
    • 2006
  • This study utilized test day of somatic cell score data of dairy cattle from 2000 to 2004. The number of data used were 124,635 of first parity, 134,308 of second parity, 77,862 of third parity, 41,787 of forth parity and 37,412 of fifth parity. The data was analyzed by least square mean method using GLM to estimate the effects of calving year, age, lactation stage, parity and season on somatic cell score. Variance component estimation using test day model was determined by using expectation maximization algorithm- restricted maximum likelihood (EM-REML) analysis method. In each parity, somatic cell score was low for younger group and was relatively high in older groups. Likewise, for lactation stage, the score was low in early-lactation and high in late-lactation in first parity and second parity. Nevertheless, for the third, fourth and fifth parity, however, high somatic cell score was observed in mid-lactation. Generally, the score was high in the peak. Although in fourth and fifth parity, the score was low in late-lactation. Environmental effect of season, somatic cell score was generally low from September to November for all parities. The score was high between June and August when the milk production is usually low. The heritability in each parity were 0.05, 0.09, 0.10, 0.05 and 0.05 for parity 1, 2, 3, 4, 5, respectively. Genetic variance value was estimated to be high in second, third and fifth parity in early-lactation and to be low in first and forth parity.

Robust Designs of the Second Order Response Surface Model in a Mixture (2차 혼합물 반응표면 모형에서의 강건한 실험 설계)

  • Lim, Yong-Bin
    • The Korean Journal of Applied Statistics
    • /
    • v.20 no.2
    • /
    • pp.267-280
    • /
    • 2007
  • Various single-valued design optimality criteria such as D-, G-, and V-optimality are used often in constructing optimal experimental designs for mixture experiments in a constrained region R where lower and upper bound constraints are imposed on the ingredients proportions. Even though they are optimal in the strict sense of particular optimality criterion used, it is known that their performance is unsatisfactory with respect to the prediction capability over a constrained region. (Vining et at., 1993; Khuri et at., 1999) We assume the quadratic polynomial model as the mixture response surface model and are interested in finding efficient designs in the constrained design space for a mixture. In this paper, we make an expanded list of candidate design points by adding interior points to the extreme vertices, edge midpoints, constrained face centroids and the overall centroid. Then, we want to propose a robust design with respect to D-optimality, G-optimality, V-optimality and distance-based U-optimality. Comparing scaled prediction variance quantile plots (SPVQP) of robust designs with that of recommended designs in Khuri et al. (1999) and Vining et al. (1993) in the well-known examples of a four-component fertilizer experiment as well as McLean and Anderson's Railroad Flare Experiment, robust designs turned out to be superior to those recommended designs.