• The Transactions of the Korean Institute of Power Electronics
• /
• v.17 no.3
• /
• pp.274-280
• /
• 2012

In this paper, three current controllers for a grid-connected PCS using an LCL filter are compared and analyzed. Current controllers discussed in this paper are linear controllers such as PI (proportional-integral), PR (proportional-resonant), and DB (deadbeat) controller. Both transient and steady state responses of each controller are compared through both simulation and experiment. Although the DB controller has the fastest transient response and the lowest THD in the steady state, the DB controller has two cycles delay of current response in the steady state and has the stability problem which can be occurred due to variation of the system parameters. On the one hand the responses of PR controller are not much different from that of DB controller but the other hand that are not only strong to noise of grid current but also have smaller THD than PI controller. Considering the response time and stability issue of three controllers, the PR controller has the best performance among three controllers and thus can be strongly recommended as a current controller for a grid-connected PCS.

• Journal of IKEEE
• /
• v.23 no.4
• /
• pp.1280-1287
• /
• 2019

Grid-connected bidirectional PCS(Power Conditioning System) technology is a technology for implementing distributed renewable energy smart grid. And it is always charged by using power collected from solar modules and commercial grid power among vast smart grid systems, and stored when needed.It is a hybrid energy storage device that allows power to be released into the low voltage system. To this end, a PV input power converter with MPPT function, a bidirectional power converter for battery charging and discharging, and a DC Link input are output to a 3 phase 380V AC system, and if nessary, the bidirectional DC/DC converter We designed and developed a PCS with three power converter structures composed of inverters that perform battery charging. Currently, this system is applied to the site of Jeju, which is vulnerable to power outages and fire accidents.

• 한국태양에너지학회:학술대회논문집
• /
• 2012.03a
• /
• pp.419-424
• /
• 2012

This paper discusses the state-of-the-art techniques in real-time state estimation for the Smart Microgrids. The most popular method used in traditional power system state estimation is a Weighted Least Square(WLS) algorithm which is based on Maximum Likelihood(ML) estimation under the assumption of static system state being a set of deterministic variables. In this paper, we present a survey of dynamic state estimation techniques for Smart Microgrids based on Belief Propagation (BP) when the system state is a set of stochastic variables. The measurements are often too sparse to fulfill the system observability in the distribution network of microgrids. The BP algorithm calculates posterior distributions of the state variables for real-time sparse measurements. Smart Microgrids are modeled as a factor graph suitable for characterizing the linear correlations among the state variables. The state estimator performs the BP algorithm on the factor graph based the stochastic model. The factor graph model can integrate new models for solar and wind correlation. It provides the Smart Microgrids with a way of integrating the distributed renewable energy generation. Our study on Smart Microgrid state estimation can be extended to the estimation of unbalanced three phase distribution systems as well as the optimal placement of smart meters.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.223-224
• /
• 2015

배전 계통 산업 현장에서는 스위칭 소자 및 제어장치, 전 자기기들이 한 대 맞물려 증가하고 있다. 또한, 스마트 그리드(Smart Grid) 및 마이크로 그리드(Micro Grid)의 개념이 도입되면서 분산 전원 이 널리 보급되고 있다. 이로 인해 현장에서는 많은 전기전자기기들이 설치되어 운영 중에 있고, 이것은 noise 및 고조파와 같은 왜란이 발생 되는 원인을 초래하고 있다. 왜란은 여러 전기 전자 장비들의 데이터 취득 왜곡 현상을 발생시키고, 이러한 데이터 손실로 인해 기기들의 오동작 및 사고를 발생시킨다. 대표적인 왜란으로는 common mode noise 같은 대지(大地) 등의 기준점과 각 신호선 사이에 나타나는 노이즈가 있으며, 선로 및 장비 특성에 따라 기수 및 우수 고조파가 있다. 이러한 왜란들은 전자기기들의 오동작 및 신호의 부 정확성으로 제품 신뢰성에 문제를 초래한다. 특히 데이터 계측 실패 및 Serial 통신을 함에 있어서 신호 손실을 발생시켜 데이터 변형을 초래한다. 이로 인해 배전선로에 위치한 전자기기들이 왜곡된 데이터로 동작을 하게 되고 이는 곧 선로의 사고를 발생시키게 된다. 따라서 왜란들을 사전에 방지하여 기기 오동작 및 부동작을 예방하기 위해서 산업계에서는 왜란에 대한 인식을 지속적으로 증가시키고 있다. 실제 현장에서도 이와 같은 왜란으로 인해 기기 오동작을 하는 경우가 많으며 이를 해결하기 위한 여러 신호처리 기법을 적용하고 있다. 이에 본 논문에서는 여러 종류의 샘플링 데이터 량을 생성할 수 있도록 샘플링 속도를 다변환(Multi-interchange)하고 각 샘플링 속도에 맞게 계측된 샘플링 데이터를 DFT 신호 처리하여 왜란으로부터 강건한 계통 주파수를 계측한다. 또한, 주파수 별 DFT 값을 Table화 하여 계통 주파수를 찾아낸다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.4 no.4
• /
• pp.409-417
• /
• 2003

In recent years, better quality in power electric services is being required with the development of information industries and the improvement of living standards. Also, the small scaled dispersed storage and generation (DSG) systems are being interconnected with the distribution systems and customers by the influence of the recent issues such as deregulation and global environmental problems in power system. Under these circumstances, it is very important to maintain the customer voltages within allowable limits for the distribution system which is located at the most sensitive part in the power system. To overcome these problems, this paper shows the basic concepts of FRIENDS which is considered as one of the power delivery system in the near future and also presents an evaluation method on the impacts of customer voltages by operation models of FRIENDS. The FRIENDS can change the system configuration in a flexible manner by using the static switches and offer the different power qualities in power services through the power quality control centers which play the most important role in FRIENDS. Numerical examples are shown in order to indicate the efficiency of the proposed method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.8
• /
• pp.1606-1612
• /
• 2015

In this paper, a portable high efficiency nondispersive infrared(NDIR) $CO_2$ sensor module with a smart device interface is developed. For low power consumption design, an IR LED was used instead of tungsten lamp for light source and an optical waveguide optimized to the sensor module is designed. With the smart device interface, power of the sensor module is applied from the battery of smart phone. The measured data of the sensor module such as $CO_2$ concentration, temperature, and humidity are displayed on the smart phone using android application. From measured results, the developed sensor module shows ${\pm}60ppm$ tolerance error from 0 to 3,000ppm $CO_2$ concentration range among $-10^{\circ}C$ and $50^{\circ}C$ ranges.

• Journal of the Korean Electrochemical Society
• /
• v.12 no.2
• /
• pp.119-130
• /
• 2009

This article reviews recent R&D trends in SOFC development with an emphasis on industries that can produce the SOFC stack and power generation system. SOFC is an electrochemical device that can convert the chemical energy of fuel into the electrical energy with environment friendly system and high efficiency. SOFC power generation system could be classified as the portable power generation system, auxiliary power unit(APU), residential power generation(RPG) and large size distributed power generation. In the case of more than 10kW system, the major R&D trends are focused on the tubular type SOFC system with high efficient and long term stability to meet the commercialization of SOFC power generation system.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.24-24
• /
• 2009

현재 조선소를 비롯하여 각종 산업 전반적으로 기존의 SCR 용접기를 대체하여 용접품질이 우수한 인버터 용접기가 널리 사용되고 있는 실정이다. 그러나 기존 인버터 용접기의 전원은 Mono 타입으로 이루어져 있어 대용량 인버터 용접기의 경우 대용량 스위칭 소자가 요구되어 제조원가가 높다. 그리고 문제 발생 시 용접기의 사용이 불가능하게 된다. 개발된 단위모듈을 병렬로 연결하여 대용량 용접기를 구성하게 되면 제조원가를 절감할 수 있으며 병렬로 연결되어 단위 모듈에 문제가 발생하여도 계속적인 사용이 가능하고, 주 회로를 작은 용량으로 분산시켜 전력을 제어하므로 높은 에너지 효율을 가지게 된다. 또한 인버터 용접기의 가장 중요한 성능인 스위칭 주파수에 있어서도 기존의 인버터 용접기는 20kHz의 스위칭 주파수를 가지지만 본 기술은 낮은 전력을 병렬로 연결하여 대용량을 동시에 제어가능 하므로 약 70kHz의 고속제어가 가능하다. 본 연구에서는 개발된 용량 170A단위모듈을 병렬로 연결하여 단위모듈 집적형 인버터 아크용접기 510A, 680A급의 부하테스트 실시 및 기본출력특성에 대하여 실험하였으며, GMAW에서 ${\Phi}1.6$ 솔리드 와이어를 이용하여 두께 20t의 후판 맞대기 용접에 적용실험을 실시하였다. 그 결과 모든 전류영역에서의 부하특성 및 출력특성이 양호하게 나타났으며, 후판 맞대기 용접에서는 SAW에 버금가는 생산성과 용접특성을 얻을 수 있었다.

• Journal of Engineering Education Research
• /
• v.6 no.1
• /
• pp.56-64
• /
• 2003

In this paper, we designed and implemented a client/server distributed environment and developed a web-based virtual laboratory system for electronic circuits. Since our virtual laboratory system is implemented to describe the on-campus laboratory, the learners can obtain similar experimental data through it. The proposed virtual laboratory system is composed of four important components : Principle Classroom, Virtual Experiment Classroom, Evaluation Classroom and Overall Management System. Through our virtual laboratory, the learners will be capable of learning the concepts and theories related to electronic circuit experiments and how to operate the experimental equipments such as multimeters, function generators, digital oscilloscopes and DC power supplies. Also, every experimental activity occurred in our virtual laboratory is recorded on database and printed out on the preliminary report form. All of these can be achieved by the aid of the Management System. The database connectivity on the web is made by PHP and the virtual labol'atory environment is set up slightly differently for each learner. Finally, we have obtained several affirmative effects such as reducing the total experimental hours and the damage rate for experimental equipments and increasing learning efficiencies as well as faculty productivity.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.4
• /
• pp.976-987
• /
• 1998

In this paper, the effect of nonllinear distortion, caused by a high-power amplifier(HPA) in an orthogonal frequency division multiplexing (OFDM) system, on the receiver part is analyzed. Since the HPA, which can be modeled by a memeoryless Volterra system, distorts OFDM signals in a nonlinear fashion, the received signal at each subchannel includes the multiplicative distortion of 1-st order as well as additive nonlinear distortion of high-order. the nonlinear distortion can be viewed as a nonlinear interchannel interference (NICI) since it consists of harmonic distortions and intermodulation distortions, produced by oother subchannels affecting the subchannel of interest. In this paper, we analytically derive the variance of NICI in terms of average input power using the volterra model for HPA, and then calculate the bit-effor rate(BER) performance of an OFDM system. Also, we propose a simple method to compensate for the phase distortion in OFDM system amplified by HPA, OFDM system employing 16-QAM constellation input.