• Ceramist
• /
• v.1 no.1
• /
• pp.28-36
• /
• 1998

세라믹 분발의 분산안정성은 입자의 입경 및 형상, 배열형태, 그리고 분산기구에 따라 크게 달라진다. 대체로 입경이 콜로이드 범위내에 존재하면 일반적인 정전반발력이나 입체반발력에 의하여 분산이 가능하지만, 콜로이드 범위를 넘는 조대한 입경을 가지는 분말에서는 진정한 분산안정성을 얻는 것은 불가능하다. 비록 콜로이드 범위에 속히는 입경을 가지더라도 Hamaker 상수가 매우 높거나 기하이방성을 가진 입자가 우선배향성을 가지는 경우에도 마찬가지의 결과를 보여 준다. 진정한 의미의 분산안정성을 얻을 수 없는 경우 입자 간 포텐셜 에너지의 절대값이 최소가 되도록 함과 더불어 고분자 흡착층이나 전기이중층의 두께를 조정하여 입지간 평형거리를 조정하여 후속공정에서의 균일성을 유지하는 것이 기능하다. 이와 같은 제한응집은 진정한 의미의 분산안정성을 얻을 수 없는 분말을 구성분말로 하는 단미는 물론 복합재료에서도 활용이 가능하다. 나노 크기의 입경을 가지는 분말에서는 반데르발스 인력은 상대적으로 작지만, 정전반발력도 동시에 작아지기 때문에 에너지 장벽의 높이가 충분하지 않은 경향을 보인다. 따라서, 나노 분말의 분산안정성은 흡착층의 두께가 크지 않는 저분자량의 고분자를 흡착시켜 입체반발력을 부여하는 것이 바람직하다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.05a
• /
• pp.163-166
• /
• 2009

For the preparation of Aluminum-slurry fuel, the effects of process parameters on the aluminum dispersion stability in the liquid fuel have been investigated. The dispersion stability of aluminum-slurry fuels could be monitored by measurements through Turbiscan using the scattering of the Laser. Through the application of various additives, TPAB (Tetrapropyl ammonium bromide) showed more reasonable performance than others.

• Journal of the Korean Ceramic Society
• /
• v.38 no.4
• /
• pp.343-350
• /
• 2001

본 연구에서는 탄산화법으로 침강성 CaCO$_3$분말을 제조하고 제조된 CaCO$_3$현탁액의 분산안정성을 연구하였다. CaCO$_3$현탁액의 pH 변화와 고분자전해질 PMAA와 PAA의 첨가에 따른 입자크기, 유동학적 특성(점도), zeta potential 및 현탁액의 침강속도 등을 측정하였다. 탄산화법에 의해 약 0.1$\mu\textrm{m}$ 크기와 비표면적이 23.57$m^2$/g인 단분단 calcite형 CaCO$_3$분말을 제조하였다. pH가 11인 CaCO$_3$현탁액에 0.01 wt% PMAA가 첨가된 경우에 우수한 분산안정성을 나타내었는데 이는 CaCO$_3$입자표면에 PMAA의 흡착에 의한 electrosteric 안정화기구와 CaCO$_3$입자들 사이의 정전기적 반발력에 의한 것으로 판단된다. PMAA와 PAA 첨가량 변화에 따른 pH 6, 9, 11의 CaCO$_3$현탁액의 침전높이를 측정한 결과 PMAA와 PAA의 농도가 0.15 wt% 부근에서 분산안정성을 보였는데 이는 CaCO$_3$입자들 사이간의 분산제에 의한 뚜렷한 경계를 갖는 흡착층이 형성되었기 때문으로 생각되며 따라서 CaCO$_3$현탁액의 최적 분산안정성을 위해서는 적절한 pH 조절과 PMAA 및 PAA의 첨가가 필요함을 알 수 있다.

• Journal of Adhesion and Interface
• /
• v.20 no.2
• /
• pp.53-60
• /
• 2019

Stable graphene dispersions in various organic solvents and in water were achieved via noncovalent functionalization of graphene surfaces using different types of commercially available surfactants. Stable dispersions were obtained in short time sonication, 3 h. In NMP, graphene with Tween and Span series, and with Pluronic surfactants showed stable dispersions. In ethanol, nitrogen based surfactants showed stable dispersions. In water and dichloromethane partially stable graphene dispersions were obtained using poly(4-vinyl pyridine) and sodium dodecyl sulfonate surfactants. Large scale productions of stable dispersions were successful using poly(4-vinyl pyridine), poly(vinyl pyrrolidone), and poly(2-(dimethylamino)ethyl methacrylate). Thus, this work will serve as a library to select the surfactants for different solvent systems.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.13 no.3
• /
• pp.34-40
• /
• 2009

For the preparation of carbon-slurry fuel, the effects of process parameters on the carbon dispersion stability in the liquid fuel have been investigated. The dispersion stability of carbon-slurry fuels could be monitored by measurements of particle size and carbon contents in the different positions, and observation of dispersion states after centrifuging. Through the application of various additives, it was found that NB463S84 based on polyolefin succinimde showed the best dispersion and longest stability life of carbon-slurry fuel. Also, PIBSI (polyisobutenyl succimide) with the similar functional groups to NB463S84 was effectively synthesized and same dispersion stability was verified by application to carbon-slurry fuel. Finally, the possibility of practical use of carbon-slurry fuels was confirmed by application of the mixing conditions obtained from g scale to kg scale preparation.

• Applied Chemistry for Engineering
• /
• v.22 no.2
• /
• pp.133-137
• /
• 2011

In this study, illite was size-reduced using a wet-ball-milling treatment to improve its dispersion. Changes in illite particle size, size distribution, and dispersion characteristics after varying the treatment period were investigated. And the dispersion and dispersion stability of illite solution after 2 h wet ball milling treatment with different pH conditions were also evaluated. The illite particle size significantly decreased as the treatment time increased and the size reduction effect of wet ball milling deteriorated above 2 h treatment time. In addition, illite particle size was more evenly distributed as the treatment time increased. X-ray diffraction (XRD) analysis showed that no crystal structural changes of illite were induced, but the characteristic peak of illite the weaker due to the size reduction and exfoliation, as the treatment time increased. Zeta potential analysis showed that the illite dispersion improved, as the treatment time increased. The illite wet-ball-mill treated at pH 2 had the lowest dispersion stability. Illite dispersion and dispersion stability increased as pH increased, due to the increase in surface ionization. Hence, the results showed that as the treatment time increased, the illite particle size decreased, and dispersion and dispersion stability improved due to the increase in surface energy and repulsion force between particles.

• Applied Chemistry for Engineering
• /
• v.24 no.6
• /
• pp.656-662
• /
• 2013

The iron oxide ($Fe_3O_4$) particles in the coolant of the secondary system of a nuclear power plant reduce the heat transfer performance or induce corrosion on the surface of the heat transfer tube. To prevent these problems, we conducted a study to improve the dispersion stability of iron oxide using polymeric dispersant injection in simulated secondary system water. The three kinds of anionic polymers containing carboxyl groups were selected. The dispersion characteristics of the iron oxide particles with the polymeric dispersants were evaluated by performing a settling test and measuring the transmission, the zeta potential, and the hydrodynamic particle size of the colloid solutions. Polymeric dispersants had a significant impact on the iron oxide dispersion stability in an aqueous solution. While the dispersant injection tended to improve the dispersion stability, the dispersion stability of iron oxide did not increase linearly with an increase in the dispersant concentration. This non-linearity is due to the agglomerations between the iron oxide particles above a critical dispersant concentration. The effect of the dispersant on the dispersion stability improvement was significant when the dispersant concentration ratio (ppm, dispersant/magnetite) was in the range of 0.1 to 0.01. This suggests that the optimization of dispersant concentration is required to maximize the iron oxide removal effect with the dispersant injection considering the applied environments, the iron oxide concentration and the concentration ratio of dispersant to iron oxide.

• Journal of the Korean Magnetics Society
• /
• v.4 no.1
• /
• pp.62-68
• /
• 1994

Water-based magnetic fluids containing synthesized ultrafine magnetite were successfully prepared with $C_{18}$ fatty acid such as oleic acid, linoleic acid and stearic acid. Oleic acid was needed the amount of $3.0{\times}10^{-2}$ mol per 20 g magnetite to stabilize the magnetite $d\;=\;113\;\AA$ particles. From pH 8.0 to pH 11.0, stable aqueous-based fluids could be obtained. The aggregated powder after drying the water-based magnetic fluid was also successfully re-dispersed in dilute $NH_{4}OH$ solution and in kerosene. The pH levels of the magnetic fluid using oleic acid system could be predicted by the pH values obtained by calculation of therrrodynamic data.

• Proceedings of the KIEE Conference
• /
• 2008.09a
• /
• pp.263-265
• /
• 2008

분산전원의 배전계통과 연계 시 역 조류, 전압변동, 고조파, 보호협조, 고장전류증가 등의 문제를 일으킬 수 있으므로 배전선로의 안정운전을 위해서는 배전선로의 원활한 보호협조를 통한 적절한 안정운전 방안이 필요하다. 따라서 본 연구에서는 분산형 전원이 연계된 배전계통에서의 리클로저와 변전소 릴레이와의 보호협조 측면에서 악영향을 끼치지 않는 분산형 전원의 연결을 OFFDAS 프로그램에 의하여 검토하여 더 효과적이고 용이한 방법으로 안정 운전할 수 있는 연계방안을 제시하고자 한다.

• Proceedings of the KIEE Conference
• /
• 2006.11a
• /
• pp.252-254
• /
• 2006

분산전원의 계통 연계 증가로 인하여 전력계통의 과도안정도에 미치는 영향 역시 증가하고 있으며, 이로 인하여 재폐로에 미치는 영향 역시 증가하고 있다. 과도 안정도 평가 방법으로는 등면적법, 확장 등면적법, 과도 에너지 함수법 등이 있다. 이 중 과도 에너지 함수법은 포텐셜 에너지와 운동 에너지를 이용하여 과도 안정도를 평가하는 방법으로 분산전원이 연계된 배전계통 같이 복잡한 계통에서 과도 안정도 평가를 용이하게 할 수 있다. 따라서, 본 논문에서는 에너지 함수를 이용한 분산전원 연계 계통의 재폐로 기법을 제시하였다. 에너지 함수를 이용하여 계통의 과도 안정도를 평가하며, 그 여부에 따라 재폐로 방법을 달리한다. 또한, 제시한 기법을 EMTP MODELS로 구현하였으며, 한전 실 계통에 적용하여 그 타당성을 평가하였다.