• Journal of the Korean Wood Science and Technology
• /
• v.45 no.5
• /
• pp.599-612
• /
• 2017

Human hair (HH) is produced as a waste from beauty parlor and barbershop. HH-based adhesives were formulated with NaOH-hydrolyzed HH, $H_2SO_4$-hydrolyzed chicken blood (CB) and PF as a crosslinking agent. Physicochemical properties and retention rate against hot water of the adhesives were measured to investigate the potential of HH as a raw material of wood adhesives. HH was composed of keratin-type protein of 80% and over. Ash of less than 0.1% was contained in HH. Among the amino acids included in HH, glutamic acid showed the highest content, followed by cysteine, serine, arginine and threonine. Solid content of the adhesives ranged from 33.2% to 41.8% depending on hydrolysis conditions of HH and PF type. Viscosity at $25^{\circ}C$ ranged from 300 to $600mPa{\cdot}s$ resulting in a sprayable adhesive. Retention rate against hot water measured to evaluate the water resistance of adhesives was the highest in the cured resin formulated with 5% NaOH-hydrolyzed HH and 5% $H_2SO_4$-hydrolyzed CB. Meanwhile, the molar ratio of formaldehyde to phenol in PF did not have a significant impact on the retention rate of HH-based adhesives. When the retention rates of HH-based adhesives were compared to those of conventional wood adhesive resins used for the production of wood-based panels extensively, HH-based adhesives formulated with 30 wt% PF showed lower retention rate than commercial urea-formaldehyde resin. However, when PF content was increased to 35 wt%, the retention rate greatly increased and approached to that of commercial melamine-urea-formaldehyde resin. Except for the results mentioned above, the analysis of economic feasibility suggests that HH-based adhesives can be used for the production of wood-based panels if HH is hydrolyzed in proper conditions and then the HH-based adhesives are formulated by the HH hydrolyzates with 35 wt% PF.

• Journal of Sericultural and Entomological Science
• /
• no.11
• /
• pp.15-22
• /
• 1970

This experiment is to investigate the influence on business by varying the scouring condition of raw silk. The conditions of experiment are changed by temperature, time concentration and scouring reagent as well as the pH value of scouring solution, involving the repeat number of treatment in the same reagent solution. The results are as follows. 1) The shorter the scouring time, the more lousiness showed on law silk. The difference of lousiness quantity are especially remarkable between 30 min. and 60min, while the appearance of lousiness is slight between 50min. and 90min. 2) The lousiness shape was just like splited end and short wool fiber type during than 60 min. scouring, and splited end and long wool fiber type was appeared during 120 min. scouring. 3) The seperation of threads on silk panel was difficult with undissolved sericin in case of lower than 90$^{\circ}C$ of scouring temperature, so that it was almost impossible to inspect lousiness. 4) In case of repeating one after another scouring in the same solution, the more number of treatment, the less sho wed lousiness. Little difference were appeared in the quantity of lousiness from first to eighth repeated scouring, while large difference of quantity was appeared between 8th and 9th repeated scouring. 5) The quantity of lousiness was also increased until scouring reagent (Marseilles soap) is added to 0.75％, but rather decreased with more than 0.75％ of soap. The most variety of lousiness quantity was occured when the concentration of soap is changed from 0.15％ to 0.20％. 6) The peculiarities of lousiness shape by the concentration of scouring reagent were as followings; most of lousiness are splited end short wool fiber type with lower wool fiber type with higher than 0.75％, and the mixture of both the former and the latter with 0.5％ concentration. 7) The quantity of lousiness by the kind of scouring reagent was the least with 5％ of Na$_2$CO$_3$ solution, and the most with the mixture of 0.25％ Marseilles soap and 0.25％ Na$_2$CO$_3$. 8) The more increased pH value, the more lousiness showed. The peculiarities of lousiness shape was the splited end and short wool fiber type, and the end and long wool fiber type with higher value of pH 11 because of the decreased strength of threads and the cutting of brin. 9) With the discussions mentioned the above, the scouring conditions to decrease the lousiness quantity are summarized as follows. (1) It is better to take the possible long time of scouring. (2) Temperature should be kept higher than 95$^{\circ}C$ for complete scouring. (3) It was the best to use 0.5％ of Marseiles soap as scouring reagent. (4) No good results were produced by using the mixture of scouring reagent. (5) The best pH range of scouring solution was 9.5 to 10.5.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.4 no.4
• /
• pp.79-93
• /
• 1984

The dissolved air flotation(DAF) has been shown to be efficient process for the removal of algae ftom water. The efficiency of DAF can be affected by the volume ratio of pressurized liquid to sample, the pressure pressurized liquid, the contact time, the appropriate coagulant and its amount, the water temperature, the turbulence of reactor, the bubble size and rising velocity etc. The purpose of this paper is to compare the practical bubble rising velocity with the theoretical one, to investigate the adhesion phenomenon of bubbles and floc, and the influence of bubble size and velocity upon the process. The results through theoretical review and experimental investigation are as follows: Ives' equation is more suitable than Stokes' equation in computation of the bubble rising velocity. The collection of bubble and algae floc is convective collection type and resulted from absorption than adhesion or collision. The treatment efficiency is excellent when the bubble sizes are smaller than $l00{\mu}m$, and the turbulence of reactor is small. In the optimum condition of continuous type DAF the volume ratio of pressurized liquid to sample is 15%, the contact time in reactor is 15 minutes, the pressure of pressurized liquid is $4kg/cm^2$ and the distance from jet needle to inlet is 30cm.

• Journal of Bio-Environment Control
• /
• v.23 no.4
• /
• pp.329-336
• /
• 2014

As an abiotic stress, chilling stress is one of the major factors limiting plant growth and increasing susceptibility to pathogens. Therefore, enhancing stress tolerance in plants is an important strategy for their survival under unfavorable environmental conditions. The objective of this study was to determine the effects of the exogenous application of salicylic acid (SA) or nitric oxide (NO) on chilling tolerance in pepper seedlings. Pepper (Capsicum annuum L. 'kidaemanbal') seedlings were grown under normal growing conditions ($20/25^{\circ}C$, 15 hours photoperiod, $145{\pm}5{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$, fluorescence lamps) for 23 days after transplanting. The solution (3 mL) of 1 mM SA and 0.3 mM NO with surfactant triton 0.1% were sprayed two times a week, respectively. Right after the completion of chemical application, seedlings were subjected to chilling condition at $4^{\circ}C$ for 6 hours under dark condition and then the seedlings were recovered at the normal growing conditions for 2 days. In order to assess plant tolerance against chilling stress, growth characteristics, chlorophyll fluorescence (Fv/Fm), and membrane permeability were determined after chilling stress imposition. Total phenolic concentration and antioxidant capacity were measured during the whole experimental period. Disease incidence for pepper bacterial spot and wilt was also analyzed. Pepper seedlings treated with SA or NO were maintained similar dry mass ratio, while the value in control increased caused by chilling stress suggesting relatively more water loss in control plants. Electrolyte leakage of pepper seedlings treated with SA or NO was lower than that of control 2 days after chilling treatment. Fv/Fm rapidly decreased after chilling stress in control while the value of SA or NO was maintained about 0.8. SA increased higher total phenolic concentration and antioxidant capacity than NO and control during chemical treatment. In addition, increase in total phenolic concentration was observed after chilling stress in control and NO treatment. SA had an effect on the reduction of bacterial wilt in pepper seedlings. The results from this study revealed that pre-treatment with SA or NO using foliar spray was effective in chilling tolerance and the reduction of disease incidence in pepper seedlings.