• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1999.04a
• /
• pp.2-2
• /
• 1999

액체추진제 로켓엔진에서 분사기의 미립화 및 혼합 특성과 그에 따른 연소 특성은 성능과 안정성을 결정하는 중요한 파라미터이며 분사기는 제한된 설계 조건하에서 최대의 열방출율을 발휘하도록 설계되어야 한다. 여기서 연소효율은 연료와 산화제의 혼합특성과 충돌 분무의 미립화의 정도에 의해 결정되므로 충돌 분무 유동성의 혼합, 미립화 특성과 이에 따른 인조성능 특성을 명확하게 밝힘으로써 최대 엔진성능을 위한 설계가 가능하게 된다. 분사기의 설계에는 분사요소형태, 분사공의 형상 및 유동시스템 등이 포함되며 특히 분사요소 형태의 선택에는 추진제, 연소실냉각방법, 연소실 형상, 자동조건 및 엔진의 수명 등이 중요한 제한조건으로 고려된다. 이런 형태의 분사 요소들 중, 충돌형 분사기는 저장성 추진제를 사용하는 중, 저추력의 액체추진제 로켓엔진에 주로 사용된다. 이 분사형태는 미립화 성능이 높지 않고, 분사공 직경 및 운동량비에 따른 혼합성능이 만감하며 blow apart 등에 의한 열부하 혹은 안정성에 대한 문제가 있으나 양호한 혼합효율, 신뢰성과 제작의 용이함으로 인하여 광범위하게 사용된다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.17 no.1
• /
• pp.26-34
• /
• 2013

An analytic approach to determine the optimal conditions for maximizing altitude of a sounding rocket is suggested. The behavior of the one-dimensional momentum equation including thrust, gravitational force and aerodynamic drag force is investigated. For the case where an analytic solution exists, a characteristic equation for determining optimal condition for maximizing altitude at the burn-out state and that for maximizing altitude at the stationary state are developed and verified with numerical experiments.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.16 no.3
• /
• pp.41-48
• /
• 2012

A study to determine the optimal jet conditions for maximizing altitude of the sounding rocket is conducted. The behavior of a simplified one-dimensional momentum equation including aerodynamic drag is investigated. The case where an analytic solution exists and the case where the mass flow rate is constant are calculated. The solutions are compared with numerical solutions. It is shown that there are the optimal jet conditions for maximizing altitude of a sounding rocket and the optimal condition is a function of the rocket mass ratio.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.597-600
• /
• 2010

Cold flow injection test was conducted to investigate the characteristics of cryogenic liquid nitrogen jet at sub to supercritical condition. Single jet injector element was installed in high pressure chamber to investigate the effect of ambient pressure around the jet, injector geometry and flow conditions. Experimental results showed obvious differences between jet characteristics under subcritical and supercritical condition. Effect of injector inlet shape also was investigated.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.323-328
• /
• 2002

양파의 껍질에 칼금을 내고 꼭지와 뿌리를 절단한 후 회전하는 두 개의 롤러 위에 양파를 낙하시켜 구르게 하면서 그 위에 고압공기를 분사시켜 양파의 외각 껍질을 제거하는 공기분사식 박피장치의 최적 작동조건을 구명하기 위하여 수행한 시험결과를 요약하면 다음과 같다. 1, 박피장치에 고압공기를 분사하지 않았을 때, 롤러의 원주속도가 빠를수록, 양파의 무게가 가벼울수록 구름소요시간은 줄어들었고 직경방향 구름율이 가장 높았는데, 직경방향 구름소요시간이 가장 짧게 나타나는 주롤러의 원주속도는 2.4 m/s이었다. 2. 주롤러의 원주속도 2.4 m/s일 때 양파의 무게, 분사공기압 및 칼금수가 증가할수록 박피율은 증가하였으며, 박피율이 가장 높은 조건은 칼금수 4개, 분사공기압 3.5 kg/$cm^2$이상이었다. 3. 박피소요시간은 칼금수가 많을수록, 분사공기압이 높을수록 짧아지는 것으로 나타났고, 칼금수를 4개로 하고 분사공기압을 4.0 kg/$cm^2$이상으로 하면 박피소요시간을 2초 이하로 유지할 수 었다. 4. 양파의 껍질강도는 저장기일과 조건에 따라 다르므로 모든 양파의 박피를 위해서는 분사 공기압을 4.0 kg/$cm^2$이상으로 하고 공기분사시간을 2초에서 5초가지 조절할 수 있는 장치를 부착하는 것이 좋을 것으로 판단된다. 5. 시험에 사용된 양파는 무게는 150~350$\pm$30 g, 직경 60~120 mm의 크기로 우리나라에서 생산되는 양파의 98%에 적용이 가능할 것으로 생각된다.

• Journal of Aerospace System Engineering
• /
• v.12 no.4
• /
• pp.81-89
• /
• 2018

In the present study, a numerical investigation was conducted to analyze the effect of the distance between the adjacent injectors on the characteristics of flow structure, fuel penetration, and air/fuel mixing. Numerical results were validated with experimental data using a single injection. Subsequently, the same injector geometry and properties were applied on a non-reacting flow simulation with multiple injectors. Total pressure loss, penetration height, and mixing efficiency were compared with the distance between the injectors. The results showed that each injected gas merged into a single stream, resulting in the 2D-like flow fields under the condition of short distance and lower mixing efficiency along with higher total pressure loss. When the distance between the injectors increased, total pressure loss reduced and mixing efficiency increased due to the weakening of interactions between the injected gases.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.5
• /
• pp.79-86
• /
• 2005

The role of the injector as an acoustic resonator is studied for the high performance rocket engine adopting the gas-liquid scheme injector. Acoustic behavior in the combustor with single injector is investigated numerically adopting linear acoustic analysis for cold condition. Acoustic-damping effect of the injector is evaluated by damping factor as a function of the injector length. From the numerical results, it is found that the injector can play a significant role in acoustic damping and the optimum length of the injector corresponds to half of a full wavelength of the longitudinal mode with the acoustic frequency to be damped in the chamber. In baffled chamber, the optimum lengths of the injector are calculated as a function of baffle length for both cold and hot conditions.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.4
• /
• pp.348-353
• /
• 2011

Characteristics of cryogenic single jet flow were investigated. Liquid nitrogen was injected into a high-pressure chamber and formed single jet. Ambient condition around jet was changed from subcritical to superctirical condition of nitrogen. Injector geometries also were changed. A shape of the jet and core diameter were measured by flow visualization technique, and core spreading angle was calculated. Flow instability was found at atmospheric pressure condition. As ambient pressure increased, core spreading angle was increased and maintained after certain pressure.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.10a
• /
• pp.288-291
• /
• 2004

The spray characteristics of coaxial swirl injector under ambient high pressure conditions were investigated in this paper. Three injectors were used to study the effect of recess length and fuel injector type(open or closed). In this research, experimental conditions(ambient gas density) were calculated by Buckingham Pi-theory and spray characteristics of the injectors were represented by mass flow rate according to the injection pressure, the spray angle, mass distribution, and mean diameter of droplet.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.7
• /
• pp.692-698
• /
• 2020

This paper examines the effects of a multi-stage pilot split injection strategy on combustion and exhaust emission factors in a single-cylinder diesel engine. One analysis noted that in the single-injection condition, the maximum in-cylinder pressure and rate of heat release were highest. The pilot injection quantity was evenly divided, showing a tendency to decrease as the number of injections increased. In another injection condition, when the multi-stage pilot split injection strategy was applied, IMEP, engine torque, and combustion increased. The COV_IMEP was greatest with the lowest combustion efficiency. The combustion ability was poor. In a single injection condition, the O₂ concentration in the exhaust gas was the lowest and the CO₂ was the highest. When the multi-stage split injection strategy was applied, the low temperature combustion process proceeded, and the oxidation rate of CO₂ decreased while the emission level increased. In a single injection condition in which a locally rich mixture was formed, the HC emission level showed the highest results. A 55.6% reduction of NOx emission occurred under a three-stage pilot injection condition while conducting a multi-stage pilot split injection strategy.