• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2004.05a
• /
• pp.118-122
• /
• 2004

본 연구에서는 반도체 세정 챔버 내부에서 회전 척을 사용하는 기판의 세정 공정에서 세정장치와 건조장치를 분리하지 알고 일체화하는 기술을 연구하는 한편, 초음파 세정기술을 이용하여, 세정에 사용되는 약액을 절감하는 방법도 연구하였다. UWA(Ultrasonic Water and Clean Air) system은 초음파 진동부, 초순수 공급부 그리고 clean air공급부를 모듈화 하였다. UWA system으로 공급된 초순수에 70～130kHz범위의 초음파가 더하여지고 반도체 기판 위에 분사되면 기판 위의 미세 파티클을 세정하는 효과를 갖는다. 세정 후 연속적으로 clean air를 분사하여 기판 위의 수분을 완전히 제거한다. Particle 세정 작업을 실시한 후 표면을 검사하여 정밀세정 능력을 확인하였다.

• Journal of the korean Society of Automotive Engineers
• /
• v.9 no.1
• /
• pp.9-14
• /
• 1987

왕복동 내연 기관 실린더 내의 가스 유동은 기관의 성능 향상, 연소 개선, 배기 정화 등에 직접적 으로 영향을 미치는 인자로 되며, 최근 각종 유동의 측정 방법 및 측정 장치의 개발은 가스 유동 계측에 많은 발전을 가져 왔다. 특히 각종 열기관의 연소 성능 향상을 위한 노력은 기관의 성능 향상과 더불어 여소 배출물의 유해 성분 저감을 위한 연구에 더욱 박차를 가하게 되었다. 이에 따라서 기관의 최적 제어 운전, 자동 제어 연료 공급 및 분사장치 등에 이르기까지 많은 노력이 경주되어 왔다. 이러한 연구 개발에 못지 않게 중요한 것은 실린더 내의 연소 성능을 향상시키 는 것이며 이를 위해서는 먼저 기관 실린더 내부의 가스 유동을 밝히고, 유동의 모델링, 유동장의 계측, 연소장의 유동 측정 등의 연구가 매우 중요한 것으로 생각된다. 실린더 내의 연소 및 유 동장의 연구는 주로 연소 특성치를 관한 연구와 유동장을 중심으로 하는 흐름의 시뮬레이션을 비롯 유동장의 계측으로 크게 나눌 수 있다. 여기서는 주로 실린더 내의 가스 유동의 측정 방 법과 최근의 연구 동향에 대하여 몇 가지 측정의 보기를 중심으로 다루기로 한다.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.19 no.1
• /
• pp.40-45
• /
• 1983

The paper describes an experimental investigation of axisymmetric diesel spray and flame which is held in rapid compression machine (RCM) with electromagnetic single injection nozzle. The axisymmetric diesel spray and flame are taken with high speed photograph and analysis it with image processor. The data presented include fuel concentration of spray, flame temperature, soot concentration of flame in axial and radial direction at a moment and compared it with each other.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2004.05a
• /
• pp.37-39
• /
• 2004

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.432-437
• /
• 2010

A new device injecting secondary fuel behind flameholder was invented and tested in order to reduce low frequency combustion instability of combustor using V-gutter flameholder. Specially designed combustion device could make large combustion instability up to 180 dB successfully, and newly invented device made a success to reduce 110~120Hz low frequency pressure pulsation up to 84%. It was found that the fuel flow rate of secondary fuel supplying behind flameholder was the only parameter which dominates reduction of instability. It is considered that stabilized flame with sufficient secondary fuel can lead to break the connection between combustion system and acoustic system due to independence of flame from fluctuation of main fuel resulted from synchronization with acoustic wave.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.8
• /
• pp.718-725
• /
• 2012

Fuel or oil which is leaked into the aircraft engine bay can make a fire when it is contacted to the engine surface of hot temperature. In order to avoid fire, the fire extinguish system should be designed so that the extinguishing agent is quickly injected and its concentration keeps higher in the fire protection region. FAA requires that the extinguishing agent injected within the fire protection region should be sustained longer than 0.5 second on keeping a higher concentration than 6%. For developing a fire protection system satisfying the FAA regulation, numerical and experimental studies for the injection time and the concentration of the extinguishing agent were conducted. These results showed similar trend for the injection time or concentration, but the data acquisition was delayed due to the response of the sensors in the experiment.

• Composites Research
• /
• v.37 no.2
• /
• pp.76-85
• /
• 2024

In this paper, a composite maintenance robot using carbon fiber spray method was developed that automatically sprays mixture was created for repair to damaged areas to repair them. To develop a robot, a repair process was developed in which a mixture of milled carbon fiber, epoxy resin, and hardener is sprayed and consolidated on the damaged area. To automate the repair process, an EOAT based on a collaborative robot was developed that can automatically suction and spray the mixture onto the damaged area. To evaluate the repair performance of the robot, 0° and 90° unidirectional specimens were manufactured and tested in accordance with ASTM D3039. Tests were performed on undamaged specimen, damaged specimen, and repaired specimen by a robot after damaged. As a result of the specimen test, the tensile strength of the 0° and 90° specimens was recovered by 10% and 90% after repair. Based on the test results, the repair performance of the developed composite maintenance robot was verified.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.637-642
• /
• 2017

In this study, cold flow and combustion tests are conducted and analyzed to validate designed rocket engine head generating high temperature/pressure steam. At first, uni-injector was designed and manufactured, and cold flow test was conducted. Through this, differential pressure that can supply designed flow rate was confirmed. Also, Each injector's spray pattern were confirmed by patternator. Based on cold flow test results, we selected injectors among the candidates and arranged them on engine head, and cold flow and propellant spray tests were conducted. Finally, combustion test was carried out to analyze the flow rate, pressure, combustion efficiency. As a result, validation of rocket engine head for the development of the high temperature and high pressure steam generator has been completed.

• Journal of ILASS-Korea
• /
• v.17 no.4
• /
• pp.178-184
• /
• 2012

The aim of this study was to compare the spray characteristics of a typical fuel (100% diesel, DME) and diesel-DME blended fuel in a constant volume combustion chamber (CVCC). The typical fuel (100% diesel, DME) and diesel-DME blended fuel spray characteristics were investigated at various ambient pressures (pressurized nitrogen) and fuel injection pressures using a common rail fuel injection system when the fuel mixture ratio was varied. The fuel injection quantity and spray characteristics were measured including spray shape, penetration length, and spray angle. Common types of injectors were used.

• Proceedings of the KSME Conference
• /
• 2001.06d
• /
• pp.896-902
• /
• 2001

To meet strict emission regulation while improving engine performances, common rail injection system which is suitable for electronic control, and capable of controlling injection quantity, timing, rate and pressure individually as well as realizing high pressure has been developed. At present study, a 8L DI diesel engine was converted to a single-cylinder experimental engine allowing optical access through an extended piston and a prototype of common rail injector in progress was applied to the engine. The combustion characteristics of the engine were analysed by using direct images and characteristics of the injector were analysed. We can not say that the results are always the same to general common rail injection system but that they are just characteristics of specific prototype injector.