• Title/Summary/Keyword: 분배조

Search Result 132, Processing Time 0.024 seconds

A Study on the Expection of the Stress to the Stiffness Variation of Members on Truss Railway Bridge (부재의 강성변화에 따른 강철도 트러스 교량의 발생응력 예측에 관한 연구)

  • Cho, Sun Kyu
    • Journal of Korean Society of Steel Construction
    • /
    • v.9 no.4 s.33
    • /
    • pp.535-541
    • /
    • 1997
  • It is proper that the load distribution and the actual stress of members is analyzed by field measurement in estimating to the behavior of truss railway bridges, but those procedures are very difficult. So, the studies for the deduction of the stress, using the indirect data which are able to get from the research and investigation without field measurement, are needed. In this study, to investigate quantitically the variation of the stress of members, the stresses are obtained from the simulation which is considered the the reduction of the section area and the stiffness due to the corrosion and the degree of the stress ratio and the distribution is calculated. As the results, the stress of truss members is almost lineary increased to the decreasing of the area and the lower chord is greatly affected. And the increasing of the stress is predicted by the superposition to the results of the amount of that in each members.

  • PDF

Isolation of Antimicrobial Substance from Schizandra chinensis Baillon and Antimicrobial Effect (오미자로부터 항균활성 물질의 분리 및 항균효과)

  • Lee, Ju-Yeun;Min, Young-Kyoo;Kim, Hee-Yun
    • Korean Journal of Food Science and Technology
    • /
    • v.33 no.3
    • /
    • pp.389-394
    • /
    • 2001
  • In order to isolate antimicrobial substances from Schizandra chinensis, the dried fruits were extracted with the methanol and the extract showed a strong antimicrobial activity. Also, the methanol exract was further fractionated with hexane, dichloromethane, ethylacetate and buthanol. The ethyl acetate-soluble fraction showed the strongest antimicrobial activity. These fraction were further separated by using various chromatographic methods including thin layer chromatography, silicagel open column chromatography and prep. HPLC. A major component S-EA-5-T1 and S-EA-5-T3 from the ethyl acetate fraction, which showed a strong antimicrobial activity was identified by Mass and NMR spectrometry. Two compounds were isolated and identified as trimethylcitrate and the essential oil of Schizandra chinensis and was estimated as gomisin C, respectively. The growth of S. typhimurium was also inhibited about 1.65 to 2.86 log cycle in minced pork by the addition 1% of Schizandra chinensis extract for 12 days at $4^{\circ}C$. These results suggested that these compounds have a strong potential as a natual food preservatives.

  • PDF

Separation Characteristics of Lactic Acid by Using Mixed Tertiary Amine Extractants (혼합아민 추출제를 이용한 젖산의 분리특성)

  • Hong, Yeon-Gi;Hong, Won-Hui;Hong, Tae-Hui
    • KSBB Journal
    • /
    • v.14 no.5
    • /
    • pp.566-571
    • /
    • 1999
  • Lactic acid is of interested as the raw material of biodegradable polymer. In this study lactic acid was separated by reactive extraction with mixed tertiary amine extractant dissolved in 1-octanol/n-heptane. Mixed tertiary amine extractant was composed of tripropylamine(TPA) and trioctylamine(TOA). The concentration range of lactic acid is ca. 5wt% which is the concentration of lactic acid obtained from fermentation.Maximum distribution coeficient was obtained at 8:2 weight ratio of TPA/TOA and their extraction efficiencies were above 90%.

  • PDF

Seismic Response of Structures with Buckling-Restrained Braces (좌굴방지 가새가 설치된 건물의 지진응답)

  • 김진구;최현훈
    • Journal of the Computational Structural Engineering Institute of Korea
    • /
    • v.15 no.2
    • /
    • pp.197-207
    • /
    • 2002
  • Energy dissipation capacity and earthquake responses of steel structures installed with unbonded braces(UB) were investigated. Parametric studies were performed for a single-degree-of-freedom structure under harmonic loads, and optimum yield strength of unbonded braces were derived. Nonlinear dynamic time history analyses were carried out to investigate the seismic response of multi-story model structures with UB having various size and strength. Various techniques were applied to determine proper story-wise distribution of UB in multi-story structures. The analysis results show that the maximum displacements of structures generally decrease as the stiffness of UB increases. However for some natural frequencies and seismic loads the maximum displacement and accumulated damage increases as the stiffness of UB increases.

Determination of divider resistance in voltage divider circuits used NTC thermistor. (NTC thermistor를 사용한 voltage divider 회로에서 divider resistance결정)

  • Ku, Ja-Hun;Kim, Jong-Dae;Kim, Yu-Seop;Park, Chan-Young;Lee, Wan-Yeon;Song, Hae-Jung
    • Proceedings of the Korean Information Science Society Conference
    • /
    • 2010.06c
    • /
    • pp.221-225
    • /
    • 2010
  • 본 연구에서는 제한된 온도 영역에서 보통 정밀 온도 측정 소자로 많이 쓰이는 NTC 써미스터를 사용하여 전압 분배 회로(voltage divider circuits)를 구성하였다. 분압 저항이 온도측정 해상도에 미치는 영향을 분석하고, 회로의 분압 저항을 결정하는 방법으로서 측정하고자 하는 온도 구간의 최대 온도와 최저 온도의 NTC 써미스터 저항 값을 조화평균을 사용하여 분압 저항(divider resistance)으로 사용하였다. 선택한 분압 저항이 이상적인 저항인지에 대하여 조화평균으로 계산한 분압 저항과 대조군 저항으로 전압 분배 회로를 병렬로 구성하였다. 센서들을 항온조 넣어 설정온도($50^{\circ}C$, $70^{\circ}C$, $90^{\circ}C$)에서 각각의 온도를 측정한 후 측정 데이터의 표준편차를 구하여 평균 온도 분해능을 비교 하는 실험을 하였다. 실험결과 측정온도 구간의 최대 온도와 최소 온도에서의 NTC 써미스터 저항 값을 조화평균으로 계산한 분압 저항 값이 대조군 저항에 비해 설정온도에서 보다 높은 평균 온도 분해능(sensing resolution)을 보였다.

  • PDF

Optimization of Distribution Basin Weirs at a Sewage Treatment Plant Based on Computational Fluid Analysis Using the Taguchi and Minitab Method (전산유체해석과 다구찌 및 미니탭 방법을 활용한 하수처리장 분배조 웨어 최적화)

  • Jung, Yong-Jun;Park, Hae-Sik;Cho, Young-Man
    • Journal of Environmental Science International
    • /
    • v.30 no.12
    • /
    • pp.983-991
    • /
    • 2021
  • The role of the distribution basin role is to apportion incoming raw water to the primary sedimentation basin as part of the water treatment process. The purpose of this study was to calculate the amount of water in the distribution basin using computational fluid dynamics (CFD) analysis and to find a way to improve any non-uniformity. We used the Taguchi method and the minitab tool as optimization methods. The results of the CFD calculation showed that the distribution flow had a deviation of 5% at the minimum inflow, 10% at the average inflow, and 22% at the maximum inflow. At maximum flow, the appropriate heights of the 7 weirs(C, D, A, B, E, F, G) were 40 mm, 20 mm, 20 mm, 0, 0, 0, and 20 mm, respectively, according to the Taguchi optimization tool. Here, the maximum deviation of the distribution amount was 9% and the standard deviation was 23.7. The appropriate heights of the 7 weirs, according to the Minitab tool, were 40 mm, 20 mm, 20 mm, 0, 0, 0, and 20 mm, respectively, for weirs C, D, A, B, E, F, and G. Therefore, the maximum deviation of the distribution amount was 8% and the standard deviation was 17.1, which was slightly improved compared to the Taguchi method.

Evaluation of the impact of sewage treatment plants in the Linked treatment through the sewage treatment computer simulation program (하수처리 전산모사 프로그램을 통한 연계처리시 하수처리장 영향 평가)

  • Kim, Sungji;Gil, Kyungik
    • Journal of Wetlands Research
    • /
    • v.22 no.4
    • /
    • pp.321-327
    • /
    • 2020
  • Recently The amount of wastewater and linked wastewater is being increased every year due to industrial development, population growth, and improvement in living standards. Linked wastewater shows the feature-low flow rate and high concentration. Therefore, it has been shown that it has a great impact on the operation of the sewage treatment plant and costs a lot for treating linked wastewater. In this study, a scenario with low increase of water quality when the total amount of the inflow of linked wastewater was entered into individual reactors is obtained. According to the result of modeling, The effluent water quality get the least increment once the water was introduced into the influent and anoxic tank. We generated the various scenarios Based on these results. scenarios are varying according to inflow from linked waste water's distribution ration. As a result of modeling through various scenarios, it was found that the increment of TN and TP were at the least when the inflow of linked water was distributed with ratio between sewage (80%) and oxygen-free tank (20%).

Enhanced Diffie-Hellman Key Distribution using Mobile-phone (이동전화기를 이용한 Diffie-Hellman 키 교환기법의 개선방안)

  • Lee, Yoon-Jin;Lee, Jae-Guen;Jo, In-June
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.13 no.12
    • /
    • pp.2563-2568
    • /
    • 2009
  • Although a symmetric cryptographic system has many advantages in speed of encryption decryption, the security problems with the distribution method of secret keys have been still raised. Especially, the distribution method of secret keys for unspecified individuals who want secret communication is becoming a core issue. As a simple solution to this issue, Diffie-Hellman key exchange methods were proposed, but proved to be insufficient in depending MITM(Main In The Middle) attacks. To find effective solution to problems mentioned above, this paper proposes the strengthened Diffie-Hellman key exchange methods applied for the mobile-phone channel which are widely used. This paper emphasizes the way to distribute the synthesized session keys to the sender and the receiver, which are created with authentication numbers exchanged between the mobile-phones and Diffie-Hellman key. Using proposed ways, MITMattacks can be effectively defended.

Characteristics of Multi staged Combustion on a Double-cone Partial Premixed Nozzle (이중 콘형 부분 예혼합 GT 노즐의 다단 연소특성)

  • Kim, Han Seok;Cho, Ju Hyeong;Kim, Min Kuk;Hwang, Jeongjae;Lee, Won June
    • Journal of the Korean Institute of Gas
    • /
    • v.24 no.1
    • /
    • pp.49-55
    • /
    • 2020
  • Experimental investigations were conducted to understand the multi-staged combustion characteristics of a swirl-stabilized double cone premixed burner nozzle used for industrial gas turbines for power generation. Multi-staged combustion is implemented by injecting the fuel through the existing manifold of the side slots as well as through the apex of the cone with two fuel injection angles which are slanted or axial. NOx and CO emissions, and wall temperature distributions were measured for various fuel distributions and operating conditions. Results show that NOx emissions are decreased when the fuel distribution to the apex is 3% of the total amount of fuel, which is due to more uniform fuel distribution inside the nozzle, hence less hot spots at the flame. NOx emissions are rather increased when the fuel distribution to the apex is 8% of the total amount of fuel for axial fuel injection by occurrence of flash back in premixing zone of burner.

A Study on Mediating Effects of the Dimension of Justice in the Influence of Relational Norm to Commitment (프랜차이즈산업에서 관계규범이 결속에 미치는 영향에 있어서 공정성 차원의 매개효과에 관한 연구)

  • Shen, Feng-Hua;Oh, Se-Jo;Jung, Yeon-Sung
    • Journal of Distribution Research
    • /
    • v.13 no.2
    • /
    • pp.1-27
    • /
    • 2008
  • In a power-asymmetry relationship like franchise system, a high dependent franchisee must often rely on its powerful partner. Therefore, in order to build up 'win-win' systems, therefore channel members should increase trust and commitment each other to enhance the relationship quality to sustain long-term cooperative relationships. First of all, to increase the relationship quality in franchise system, franchisor should increase franchisee's perception of the powerful franchisor's justice. The point of this research, I established basic hypotheses and comparative hypotheses to examine franchisor's behavior what franchisee expected which influences on franchisee's attitude and behavior in power - asymmetry relationship in franchise system. For the purpose of the empirical testing, managers of franchisee in the food service industry of Korea had been selected and analyzed, and major findings in this study as follow: First, the relational norm between franchisor and franchisee increased both distributive justice and procedural justice, especially relational norm had more effect on procedural justice than distributive justice. Second, distributive justice increased both economic commitment and social commitment while procedural justice just increased social commitment only but economic commitment. So, on the relational commitment, distributive justice was more important element than procedural justice. On the other hand, procedural justice had indirect effect on economic commitment through distributive and social commitment.

  • PDF