• Journal of the Korea Convergence Society
• /
• v.9 no.4
• /
• pp.373-380
• /
• 2018

The purpose of this study was to identify the importance and performance ranking and differences in inflight meal service quality. Data were collected from A airlines passengers. In order to secure the validity and reliability of the measurement tools, exploratory factor analysis were conducted, accordingly meal, service, cleanliness were deduced. IPA results are as follows. First, the quadrant I consisted of meal flavor, meal quality, meal menu, balanced diet, korean food availability, cleanliness of dishes, cleanliness of crew clothes. In the II quadrant, appropriate temperature, appropriateness of meal distribute time, cleanliness of the meal were found. So, the airline managers should have the most interest in these attributes and had to improve first. The quadrant III showed meal quantity, liquor diversity, polite attitude, immediate response to the meal, knowledge of the meal, meal freshness. Lastly, the quadrant IV showed a variety of beverage and special meal order. It is considered that resource allocation is necessary for minimizing the amount of resources invested to the quadrant IV, and then it should be allocated the quadrant II, which is high in importance but low in performance.

• Journal of Elementary Mathematics Education in Korea
• /
• v.14 no.2
• /
• pp.287-314
• /
• 2010

The algorithm is a chain of mechanical procedures, capable of solving a problem. In modern mathematics educations, the teaching algorithm is performing an important role, even though contracted than in the past. The conspicuous characteristic of current elementary mathematics textbook's manner of manipulating multiplication algorithm is exceeding converge to 'standard algorithm.' But there are many algorithm other than standard algorithm in calculating multiplication, and this diversity is important with respect to didactical dimension. In this thesis, we have reconstructed the experimental learning and teaching plan of multiplication algorithm unit by making the best use of diversity of multiplication algorithm. It's core contents are as follows. Firstly, It handled various modified algorithms in addition to standard algorithm. Secondly, It did not order children to use standard algorithm exclusively, but encouraged children to select algorithm according to his interest. As stated above, we have performed teaching experiment which is ruled by new lesson design and analysed the effects of teaching experiment. Through this study, we obtained the following results and suggestions. Firstly, the experimental learning and teaching plan was effective on understanding of the place-value principle and the distributive law. The experimental group which was learned through various modified algorithm in addition to standard algorithm displayed higher degree of understanding than the control group. Secondly, as for computational ability, the experimental group did not show better achievement than the control group. It's cause is, in my guess, that we taught the children the various modified algorithm and allowed the children to select a algorithm by preference. The experimental group was more interested in diversity of algorithm and it's application itself than correct computation. Thirdly, the lattice method was not adopted in the majority of present mathematics school textbooks, but ranked high in the children's preference. I suggest that the mathematics school textbooks which will be developed henceforth should accept the lattice method.

• Journal of Energy Engineering
• /
• v.22 no.2
• /
• pp.96-104
• /
• 2013

Coal gasification is considered as one of the best alternatives among clean coal technology and new concept next generation technologies are under being developed to achieve low cost as well as high efficiency. In this study we have developed double swirl multi-burner as part of the development of low cost compact gasifier. We installed new concept multi-burner with pulverized coal distributor to the body of existing gasifier for burner test. Gasification test was performed under the condition of $6.4{\sim}7.2kg/cm^2$ and $1170{\sim}1300^{\circ}C$ by using Indonesian ABK (sub-bituminous) coal to get operation condition of new concept multi-burner. Our interest was focused to ensure a stable operating condition rather than the gasifier performance evaluation. As a result, we were able to achieve the carbon conversion of 84% and the cold gas efficiency of 52.1% at the stable operating conditions.

• Journal of Engineering Education Research
• /
• v.8 no.3
• /
• pp.57-68
• /
• 2005

The purpose of this study was to analyze the effect of Engineering computer programming instruction using project learning, to find out the ways to solve some revealed problems, and to improve the instruction. Unlike traditional lecture courses, students are encouraged to cultivate problem solving and teamwork skills through the programming project. In order to examine the effect of project learning, a survey was conducted with 49 students. The questionnaire consisted of 20 items with 5-grade scale each, the contents of which included learning value, workload, skills acquirement, assignment and comment. The SPSS, statistical analysis software was used to get statistics such as ANOVA, correlation and mean, etc. The results of this study showed (1) project learning was more efficient to acquire problem solving and teamwork skills compared with lecture learning, (2) there was significant correlation between self directed learning skill and information collecting skill, (3) cyber education system(i-campus) was helpful for students' self learning. But the results also showed that (4) students did not give high scores on items of the workload or difficulty of assignments. So we can conclude that it is necessary to develop the suitable projects for the capability of students to make the better project learning.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.12
• /
• pp.106-115
• /
• 2003

Diverse multimedia services will be deployed at hand on 3G-and-beyond multi-service CDMA systems in order to satisfy different quality of service (QoS) according to traffic types. In order to use appropriate resources efficiently the call admission control (CAC) as a major resource control mechanism needs to be used to take care of efficient utilization of limited resources. In this paper, we propose a QoS-aware CAC (QCAC) that is enabled to provide service fairness and service differentiation in accordance with priority order and that applies the different thresholds in received power considering different QoS requirements such as different bit error rates (BER) when adopting total received power as the ceil load estimation. The proposed QCAC calculates the different thresholds of the different traffic types based on different required BER applies it for admission policy, and can get service fairness and differentiation in terms of call dropping probability as a main performance metric. The QCAC is aware of the QoS requirement per traffic type and allows admission discrimination according to traffic types in order to minimize the probability of QoS violation. Also the CAC needs to consider the resource allocation schemes such as complete sharing (CS), complete partitioning (CP), and priority sharing(PS) in order to provide fairness and service differentiation among traffic types. Among them, PS is closely related with the proposed QCAC having differently calculated threshold per each traffic type according to traffic priority orders.

• Korean Journal of Social Welfare
• /
• v.56 no.4
• /
• pp.57-78
• /
• 2004

The economic crisis in $1997{\sim}1998$ caused massive unemployment and unprecedentedly increased the number of the poor in Korea. As many unemployed families fell into poverty, the poverty rate skyrocketed to higher than 10 percent. Not later than 2000, unemployment late got back to normal and real average income among urban households approached to the income level prior to the economic crisis. Although the economic crisis has been passed through, poverty was not decreased to the low level prior to the crisis by 2000. Why does it remain high? This study attempts to provide an answer to this question by analysing the poverty trend over the 1990s. Data come from the National Survey of Household Income and Expenditures 1991, 1996, and 20001. Results show that poverty was rapidly reduced in the first half period of the 1990s. This reduction in poverty is largely explained by steady and rapid economic growth. Modest improvement in income inequality also contributed. In contrast, the poverty rate considerably increased in the latter half of the 1990s. Average income was not fully recovered to its prior level, which reflected the economic crisis and the subsequent economic stagnation. Worsened income inequality led to higher poverty rate too. In addition, demographic changes increased the share of economically vulnerable types of families, such as families headed by single parents and the elderly. The most significant factor in explaining the higher poverty rate was extended income differential among non-elderly adults, while the next was the increased number of the elderly families. Yet, findings a little differ depending on which concepts of poverty to adopt. In the analyses based on the concept of absolute poverty, economic growth the most significantly affected the poverty trends in the 1999s. Changes in income inequality played the most important role in explaining the trend in relative poverty. Adopting the concepts of quasi-absolute poverty, which is preferred in this study, results show that rapid economic growth significantly reduced poverty in the first half of the 1990s and both worsened income inequality and stagnated economic growth increased poverty in the latter 1990s.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.9
• /
• pp.799-804
• /
• 2016

Broadband powerline communication (BPLC) uses distribution lines as a medium for achieving effective bidirectional data communication along with electric current flow. As the material characteristics of power lines are not good at the communication channel, the development of power line communication (PLC) systems for internet, voice, and data services requires measurement-based models of the transfer characteristics of the network suitable for performance analysis by simulation. In this paper, an analytic model describing a complex transfer function is presented to obtain the attenuation and path parameters for a multipath power line model. The calculated results demonstrated frequency-selective fading in multipath channels and signal attenuation with frequency, and were in good agreement with the experimental results. Inductive coupling units are used as couplers for coupling the signal to the power line to avoid physical connections to the distribution line. The inductance of the ferrite core, which depends on the frequency, determines the cut-off frequency of the inductive coupler. Coupling loss can be minimized by increasing the number of windings around the coupler. Coupling efficiency was improved by more than 6 dB with three windings compared to the results obtained with one winding.

• Economic and Environmental Geology
• /
• v.34 no.2
• /
• pp.157-166
• /
• 2001

Numerous base-metal bearing hydrothermal quartz vein deposits occur in the Hunan province of southern China. The Tangguanpu lead-zinc-tin-silver mine is the major producer among these deposits. Lead-zinc-tin-silver mineralization occurs in a single stage of massive quartz veins which filled fractures in fault zones within Paleozoic metasedimentary rocks. Sphalerite, chalcopyrite, galena, pyrite, arsenopyrite and pyrrhotite are the principal sulphide minerals in the Tangguanpu lead-zinc ores with minor amounts of tin- and antimony-bearing sulphides (stannite, teallite, boulangerite and tetrahedrite). Based on the iron and zinc partitioning between coexisting stannite and sphalerite, the formation temperature for this mineral assemblage range from 300$^{\circ}$ to 330$^{\circ}$C, which relatively agree with the upper part of homogenization temperature of fluid inclusion in quartz (20T-358$^{\circ}$C). Fluid inclusion data show that main lead-zine-tin-silver mineralization occurred from $H_{2}O$-NaCl fluids with relatively low salinities (11.2-7.3 wl.% eg. NaCI) at temperatures between 207$^{\circ}$ and 358$^{\circ}$C. The relationship between homogenization temperature and salinity suggests a history of cooling and dilution followed by initial boiling. Evidence of initial fluid boiling may indicate the fluid trapping pressures of 180 bars. The ${\delta}^{34}S{{\Sigma}S}$ values of -5.0 to 1.1 %, indicate an igneous source of sulfur in the Tangguanpu lead-zinc-tin-silver hydrothermal fluids.

• Korean Journal of Optics and Photonics
• /
• v.35 no.4
• /
• pp.175-183
• /
• 2024

Research into optical signal processing using photonic integrated circuits (PICs) has been actively pursued in various fields, including optical communication, optical sensors, and quantum optics. Among the materials used in PIC fabrication, polymers have attracted significant interest due to their unique characteristics. To fabricate polymer-based PICs, establishing an accurate manufacturing process for the cross-sectional structure of an optical waveguide is crucial. For stable device performance and high yield in mass production, a process with high reproducibility and a wide tolerance for variation is necessary. This study proposes an efficient method for fabricating polymer optical-waveguide devices by introducing the atomic layer deposition (ALD) process. Compared to conventional photoresist or metal-film deposition methods, the ALD process enables more precise fabrication of the optical waveguide's core structure. Polyimide optical waveguides with a core size of 1.8 × 1.6 ㎛² are fabricated using the ALD process, and their propagation losses are measured. Additionally, a multimode interference (MMI) optical-waveguide power-splitter device is fabricated and characterized. Throughout the fabrication, no cracking issues are observed in the etching-mask layer, the vertical profiles of the waveguide patterns are excellent, and the propagation loss is below 1.5 dB/cm. These results confirm that the ALD process is a suitable method for the mass production of high-quality polymer photonic devices.

• Journal of Food Hygiene and Safety
• /
• v.30 no.3
• /
• pp.217-226
• /
• 2015

This study was conducted to establish a standardized process for developing food safety health indicators. With this aim, we proposed a standardized process, accessed the validity of the suggested process by performing simulations, and provided a method to utilize the indicators. Developing process for domestic environmental health indicators was benchmarked to propose a standardized process for developing food safety health indicators, and DPSEEA framework was applied to the development of indicators. The suggested standardized process consists of an exploitation stage and a management stage. In the exploitation stage, a total of 6 procedures (initial indicators suggestion, candidate indicators selection, data availability assessment, feasibility assessment, pilot study, and final indicator selection) are conducted, and the indicators are routinely calculated and officially announced in the management stage. The exploitation stage is operated by an interaction between a task force team who manages the overall process, and an advisory committee (minimum of 4 in academia, 2 in research, 4 in specialists of Ministry of Food and Drug Safety) who reviews and performs evaluations on the indicators. The standardized process was simulated with 45 initial indicators, and total of 4 indicators (17 detailed indicators) were selected: 'Proportion of domestic fruit/vegetable receiving 'acceptable' in the evaluation of pesticide/herbicide residues', 'Food-borne disease outbreaks', 'Food-borne legal infectious disease incidence', 'Salmonellosis incidence'. Synthetic food safety health index was derived by calculating percent difference with the data from 2010 to 2012. Results showed that when comparing the year 2010 to 2011, and 2011 to 2012, the overall food safety status improved by 10.37% and 9.87%, respectively. In addition, the contribution of indicators to the overall food safety status can be determined by looking into the individual indicators, and the synthetic index may be illustrated to enhance the ease of interpretation to the public and policy makers. In overall, food health safety indicators can be useful in many ways and therefore, attention should be drawn to conduct further studies and establish related legislations.