• Journal of KIISE
• /
• v.43 no.2
• /
• pp.143-151
• /
• 2016

Data deduplication is an important technique for cloud storage savings. These techniques are especially important for encrypted data because data deduplication over plaintext is basically vulnerable for data confidentiality. We examined encrypted data deduplication with the aid of a key issuing server and compared Convergent Encryption with a technique created by M.Bellare et al. In addition, we implemented this technique over not only Dropbox but also an open cloud storage service, Openstack Swift. We measured the performance for this technique over Dropbox and Openstack Swift. According to our results, we verified that the encrypted data deduplication technique with the aid of a key issuing server is a feasible and versatile method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.7A
• /
• pp.947-954
• /
• 1999

A new low phase noise Dielectric Resonator Parallel Feedback Oscillator(DRPFO) that is proposed in this paper has a simple structure so that it can be fabricated in low cost and with high performance. The proposed DRPFO is in a feedback loop oscillator configuration, which is composed of a low noise amplifier, a power amplifier, a power attenuator, a power divider and a parallel resonator feedback element that consists of a dielectric resonator coupled with two microstrip lines. The measured phase noise of DRPFO was less than -81 dBc/Hz at offset frequency 1 kHz of 10.75 GHz carrier frequency, and the frequency stability of DRPFO was less than $\pm$200 kHz over the temperature range of -40$^{\circ}$C to +60$^{\circ}$C.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.148-153
• /
• 2008

As the oil price is dramatically jumping up, the consumption of LNG is rapidly expanding and the size of LNG carriers becomes bigger. For LNG ships, the application of DF (Dual-Fuel) engines gradually increases because of high efficiency, which alternatively use diesel or BOG (Boil-Off Gas) from cargo tank as a fuel. The surplus BOG from LNG cargo tank should be exhausted by GCU or liquefied through the BOG reliquefaction system and returned back. This study focused into its operational characteristics through the process simulation using HYSYS and discussed details on the influence of the variations of some operational parameters such as a distribution ratio by the change of fuel mass flow into the DF engine.

• The Journal of the Korea Contents Association
• /
• v.4 no.3
• /
• pp.61-70
• /
• 2004

As multimedia data and their applications are rapidly distributed on the Web, the research on watermark insertion and integrity assurance vigorously increases. In this paper, Discrete Wavelet Transformation dissolves an original image into the three level of low, middle, and high bandwidths. Human Visual System with the significant coefficients extracted from the middle obtains enhanced image quality and robustness using watermark insertion. Experimental results show that various attacks cannot destroy pre-inserted watermark and recovered image is of good quality by measuring PSNR.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.42 no.6
• /
• pp.29-36
• /
• 2005

RFID(Radio Frequency Identification) will be used for recognizing things and offering distinctive information in Ubiquitous environment. But we are not ready to provide security service to RFID. Therefore we propose the approach of safe RFID system which provides the solution for eavesdrop, forgery, and modification based on Pre-Distribution protocol and RC5 security algorithm. First We distributes the secret key to the Tag with the Reader that is major subject on RFID system using Pre-Distribution protocol. Then we will provide to various security services and privacy protection using RC5 security algorithm. The proposed safe RFID system simulated on ATmega128 evaluate environment.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.5
• /
• pp.10-16
• /
• 2000

This paper presents new double-sided 3-dB branch-line coupler using CPW-to-Microstrip via-hole transitions for the multi-layer applications. The characteristic impedance is obtained using the even-odd mode method, and the circuit performance Is accurately estimated by the Finite Difference Time Domain(FDTD) method. The fabricated double-sided 3-dB branch-line coupler has less than 0.3 dB power dividing imbalance and 1。 phase imbalance, greater than 30 dB isolation, and 25 dB return loss over a 20% bandwidth centered at 2 GHz. Calculated and fabricated results show that this coupler provides better performance as compared to the conventional microstrip branch-line couplers.

• Transactions of the Korean hydrogen and new energy society
• /
• v.29 no.5
• /
• pp.442-449
• /
• 2018

Research on High temperature polymer electrolyte fuel cell (HT-PEMFC) has actively been conducted all over the world. Since the HT-PEMFC can be operated at a high temperature of $120-180^{\circ}C$ using phosphoric acid-doped polybenzimidazole (PBI) electrolyte membrane, it has considerable advantages over conventional PEMFC in terms of operating conditions and system efficiency. However, If the thermal distribution is not uniform in the stack unit, degradation due to local reaction and deterioration of lifetime are difficult to prevent. The thin plate separator reduces the volume of the fuel cell stack and improves heat transfer, consequently, enhancing the cooling effect. In this paper, a large area flow field of thin plate separator for HT-PEMFC is designed and sub-stack is fabricated. We have studied stack performance evaluation under various operating conditions and it has been verified that the proposed design can achieve acceptable stack performance at a wide operating range.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.10a
• /
• pp.353-356
• /
• 2001

Earlier efforts on optical access concentrated on the design of PONs for the collection and distribution portion of the access network. PON architecture is very simple but it requires MAC protocol for control of upstream traffic. This paper proposes a MAC protocol for a broadband access network using an ATM Passive Optical Network supporting CBR/rtVBR, nrtVBR, UBR and ABR traffic. For the proposed MAC scheme, we present grant field format, minislot format, and bandwidth allocation algorithm. from the simulation result, we have confirmed that our proposed scheme ran reduce the average tell delay in comparison to that of conventional MAC schemes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.7
• /
• pp.603-611
• /
• 2013

In this paper, we propose a new frame structure and the underlying dynamic resource control mechanism to support an integrated service, including a real-time (RT) service that requires to serve the end-to-end delay performance, as well as non-real-time (NRT) service, using Self-Organizing Time Division Multiple Access (SO-TDMA)-based MAC protocol in a multi-hop ad-hoc maritime communication network. The underlying frame structure is dynamically configured by resource allocation to guarantee the average target outage performance of the real-time service. Toward this end, we analyze the average outage probability and its performance is verified for the proposed frame structure by simulation.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.201.2-201.2
• /
• 2012

위성용 초고주파신호분배기(이하, RFDU)는 위성에 장착된 두 개의 안테나와 두 개의 송수신기 사이에 위치하게 되며, 지상으로부터 송신된 제어신호와 위성의 상태 정보 신호를 전달/분배하는 RF 신호 경로를 제공하게 된다. 기존의 위성용 RFDU의 구조는 cavity 형태의 필터로 구성된 diplexer와 hybrid RF coupler 및 저역통과필터 들이 서로 SMA 케이블로 연결되어 있는 부피가 큰 구조이다. 또한 차세대 위용용 부품들은 위성을 경제성 등을 고려하여 소형/경량화 개발이 요구되고 있으며, 특히 위성용 S 대역 TC/TM 통신링크에서 RFDU와 트랜스폰더는 소형 경량화를 위해 단일 unit으로 개발되고 있다. 이에 따라 기존의 RFDU 또한 전기적 성능을 유지하면서 소형/경량화 개량 개발이 필요하다. 본 연구에서는 기존 RFDU의 소형 경량화를 위해 PCB와 housing을 이용하여 cavity 필터특성을 갖는 diplxer를 개발/구현 하였으며, PCB 페턴을 통한 내부 인터페이스용 SMA 케이블 제거 등을 적용하였다. 또한 microstrip 타입의 저역통과필터을 적용하여 소형 경량화를 이루었으며, 새로이 개발된 소형/경량의 RFDU는 전기적으로 기존의 그것과 유사하거나 동등한 특성을 갖는 것을 확인하였으며, 기존 RFDU 대비 무게 및 부피는 60 % 이상 감소하여 소형/경량화 개발을 성공하였다. 본 개발 결과물은 향후 차세대 위성용 RFDU 개발을 위한 기초 자료로 활용할 것이다.