• Journal of the KSME
• /
• v.23 no.4
• /
• pp.288-294
• /
• 1983

고속기류에 의한 수표면의 유통은 호수나 강에서 흔히 볼 수 있는 물리적인 현상으로서 기류의 속도가 증가함에 따라서 수표면에서 액적이 발생하게 되는 이른바 액체미립화 현상(atomization )이 일어나게 된다. 이러한 액체의 미립화는 내연기관에서의 분무연소에서 부터 가정에서 습도를 유지하는 가습기 및 살충제분무기에 이르기까지 그 운용도가 매우 광범위하며 최근에 이르러 액체미립화가 유체역학의 한 부분을 차지하는 단계에까지 이르러 매년 각국에서 미립화에 대한 심포지움이 개최되고 있으며 연구실적면에서는 미국보다도 오히려 가까운 일본에서 미립화에 대한 연구가 더 활발히 진행되고 있는 반면 아직 우리나라에서는 이렇다할 연구가 없으며 미립 화에 관한 논문도 불과 한두 편에 이르는 실정이다. 이러한 중요한 물리적인 현상에 대해 좀더 자세한 이해를 위해서는 액체와 기체의 상호접촉면에서의 정량적인 특성에 대한 연구가 필요하며 이러한 정량적 인자에는 (1) 액막의 평균두께 (2) 액막내의 속도분포, (3) 액막표면의 파고, 파장의 파면구조, (4)기체중의 속도분포 등이 있다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.04a
• /
• pp.53-57
• /
• 2007

고속회전의 원심력으로 연료를 공급하고 액체연료의 미립화를 초래하는 회전연료분무장치에 대한 분무특성 시험연구를 수행하였다. 특정한 공간상에 존재하는 액적의 특성을 이해하고자 고속회전 연료분사시스템을 설계 제작하였다. 시험장치는 고속으로 회전하는 Spindle, 회전연료노즐, 가압식 물탱크, 아크릴 케이스로 구성하였다. 액적의 크기와 속도를 측정하기 위해 PDPA(Phase Doppler Particle Analyzer)시스템을 사용하였고, ND-Yag Laser를 사용하여 분무를 가시화 하였다. 시험결과 고속회전 연료분사시스템의 분무특성을 확인할 수 있었고, 회전속도는 액적 크기, 속도, 분무각 및 분무패턴 등의 분무특성에 주요한 영향을 미치는 것으로 확인되었다.

• Journal of ILASS-Korea
• /
• v.8 no.1
• /
• pp.37-40
• /
• 2003

• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.1
• /
• pp.25-31
• /
• 2004

Two-dimensional laser visualization methods have been used in the study of breakup and atomization processes of non-evaporating diesel sprays. A single-hole spray injected into a quiescent atmospheric environment was visualized by the LIF(Laser Induced Fluorescence) and scattering technique. The LIF technique could be implemented to take the images which are magnified enough to show the shape of liquid ligaments and small droplets. The spontaneous scattering and fluorescent images of sprays were also taken to investigate the atomization of droplets. In the tip and periphery of a spray. the scattering light is bright and the ratio of fluorescent/scattering intensity is lower. This characteristics indicate the very high number density of small droplets which are well atomized.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.15 no.5
• /
• pp.96-106
• /
• 2011

There are many advantages in applying gel propellant to a gel propulsion system. These include higher performances, the energy management of liquid propulsion system, reliable storability and low leakage characteristics. Additionally, gel propulsion system are preferable to the high density impulse of propulsion system. Also, when compared to liquid propellants, the gel propellants acquire greater heat energy. Gel propellants achieve a high specific impulse when metal particles with aluminum and boron are added. With respect to atomization, an inactive process occurs due to the variable viscosity of the metal particles and gelling agents. To improve the defect of atomization and combustion characteristics of gel propellant, a variety of issues related to spray and combustion is introduced here.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.20 no.1
• /
• pp.43-49
• /
• 2016

An experimental study was performed to investigate the combustion characteristics of the liquid hydrocarbon fuel atomized by an ultrasonic oscillator. Configuration of the flame was caught by the DSLR camera, and images were analyzed in detail through a post-processing. Temperature of the flame zone was measured using thermocouple. It is resulted that the flame area is proportional to the mass flow rate of carrier gas as well as the voltage applied to the ultrasonic oscillator. Temperature of the flame zone is measured and analyzed according to variation in the operating condition of the burner, too.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.21 no.1
• /
• pp.132-139
• /
• 1997

Spray characteristics of external mixing sonic twin-fluid atomization nozzles are investigated experimentally. Particle sizes are measured by the Fraunhofer diffraction method using the Malvern particle analyzer, and their radial distributions are obtained using the tomographical transformation technique. The spatial distribution of SMD shows that the drop size increases in the radial direction at a fixed liquid flow rate, and the distribution is getting uniform rapidly as the atomizing gas pressure increases. The SMD decreases as the liquid flow rate increases at a fixed GLR. It is found that the atomization efficiency of the flush type sonic nozzle is superior to that of protrusion type. The effect of laser beam diameter of the particle analyzer on the spatial SMD distribution is minor at present experimental conditions.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.23 no.1
• /
• pp.69-81
• /
• 1999

In this research computational methods for the droplet atomization and spray wall impingement are studied for the non-evaporating diesel fuel spray. The TAB(Taylor Analogy Breakup) model and Wave model are compared with experiments in order to describe droplet atomization process. The Watkins model and O'Rourke model are compared to simulate the spray wall impingement. As a result, It is found that the application of the Wave model has a good agreement with the experimental data in the case of high pressure injection. With regard to wall Impingement phenomena, it is found that the Watkins model is appropriate to the high temperature cylinder wall condition, while the O'Rourke model is appropriate to cold starting problem.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.6
• /
• pp.27-33
• /
• 2002

This paper presents the comparison of prediction accuracy of hybrid models. To obtain the experimental results fur comparing with the numerical results, the macroscopic and microscopic structures of the hollow-cone spray such as spray development process, spray penetration and the distribution of mean droplet size are investigated by using a shadowgraph technique and phase Doppler particle analyzer. Also, the numerical researches using various hybrid models are performed. LISA model and WAVE model are used for the primary breakup, and TAB, DDB, and RT model are used for the secondary breakup.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2000.04a
• /
• pp.2-2
• /
• 2000

액체연료를 사용하는 엔진의 인젝터에 대한 연구는 연소효율에 중대한 영향을 미치는 분무 액적의 크기 및 분포 특성 연구에 초점을 두어왔다. 그러나 액체 로켓 엔진은 고온, 고압의 연소실 내에서 액체상태의 연료 및 산화제 액적이 매우 빠르게 기화되기 때문에, 미립화 특성 보다는 연료와 산화제의 혼합특성이 연소효율을 결정하는 변수로 작용하게 된다. 또한 분사된 액체 추진제는 미립화 단계 이전에 기화되어 초기 화염을 형성하므로, 분사 직후의 연료/산화제의 혼합과정을 이해하는 것은 상당히 중요하다.