• Title/Summary/Keyword: 분무 각

Search Result 316, Processing Time 0.02 seconds

Thermal Analysis for the GT-96 Membrane Type LNGC during the Cool-down Period (GT-96 멤브레인형 LNGC의 급냉기간에서의 열해석)

  • Lee, Jung-Hye;Choi, Hyun-Kue;Choi, Soon-Ho;Oh, Cheol;Kim, Myoung-Hwan;Kim, Kyung-Kun
    • Proceedings of the KSME Conference
    • /
    • 2004.04a
    • /
    • pp.1346-1351
    • /
    • 2004
  • This study is concerned with the thermal analysis during the cool-down period of 135,000 $m^3$ class GT-96 membrane type LNG carrier under IMO design condition. The cool-down is performed to cool the insulation wall and the natural gas in cargo tank for six hours to avoid the thermal shock at the start of loading of $-163^{\circ}C$ LNG. During the cool-down period, the spraying rate for the NG cooling decreases as the temperature of NG falls clown from $-40^{\circ}C$ to $-130^{\circ}C$ and the spraying rate for the insulation wall cooling increases as the temperature gradient of the insulation wall is large. It was confirmed that there existed the largest temperature decrease at the 1 st barrier and 1st insulation, which are among the insulation wall, especially in the top side of the insulation wall. By the 3-D numerical calculation about the cargo tank and the cofferdam during the cool-down period, the temperature variation in hulls and insulations is precisely predicted.

  • PDF

Study on Discharge Coefficient Variations of Bi-Swirl Injectors with Working Conditions (작동 조건에 따른 이중 와류 분사기 유량 계수 변화 연구)

  • Seo, Seong-Hyeon;Ahn, Kyu-Bok;Han, Yeoung-Min;Choi, Hwan-Seok
    • Proceedings of the Korean Society of Propulsion Engineers Conference
    • /
    • 2010.05a
    • /
    • pp.177-180
    • /
    • 2010
  • It has been studied the effect of mixture ratio and chamber pressure on variations of discharge coefficients. Combustion experiments of bi-liquid swirl coaxial injectors were conducted at fuel-rich conditions with liquid oxygen and kerosene. Using two types of injectors for the experiments, characteristics of the discharge coefficient have been identified from variations in a diameter of the fuel nozzle and a momentum ratio along with the change of a LOx spray angle. It is concluded that discharge coefficients do not vary because of no change of flame structures from the fact that the fuel swirl chamber is completely filled up with fuel flow.

  • PDF

Characteristics of Far Infrared Heater for Grain Drying (곡물 건조용 원적외선 방사체의 특성)

  • 이호필;김유호;한충수;연광석;조성찬;이재석;조영길;최태섭
    • Proceedings of the Korean Society for Agricultural Machinery Conference
    • /
    • 2002.02a
    • /
    • pp.349-354
    • /
    • 2002
  • 쌀 소비량은 생활 수준 향상과 외식 및 식품 산업의 발달로 감소하고, 고품질 쌀을 요구하는 성향이 높아지고 있다. 현재, 고품질 쌀을 생산할 수 있는 기술과 제반 요건은 구비되어 있으나, 수확 후 건조·저장 중에 쌀의 품질이 저하된다. 특히 건조 중 품질 저하는 고온건조에 의한 동할 발생 및 과건조가 주요 원인이다. 이를 해결하기 위해 원적외선 건조 시스템에 관한 연구가 진행 중이다. 본 연구에서는 방사율이 높고, 접착성 및 내열성 등이 강한 곡물 건조기용 방사체 코팅원료를 개발하고, 이 원료를 원적외선 방사체에 코팅한 후 방사체의 형태와 크기에 따라 표면 온도 분포 및 연료 소비량 등을 측정 분석하여 방사체의 특성과 적정 조건을 규명하고자 하였다. 연구 결과를 요약하면 다음과 같다. (1) 세라믹 코팅 원료의 배합비는 세라믹분말 40%와 결합재 60%가 접착력과 가열경화 후 표면이 양호한 것으로 나타났다. (2) 노즐의 유량 및 분무각에 따른 버너의 화염길이 및 폭은 노즐유량이 증가함에 따라 증가하는 경향을 나타내었다. (3) 방사체 위치별 표면온도편차는 방사체 길이가 1350mm인 것이 작은 것으로 나타났고, 열풍유동관 직경이 Rounding type의 경우 76.3mm, Right angle type의 경우 89.1mm일 때 표면 온도편차가 적었다. (4) 연료소비량은 열 풍유동관 직경이 클수록, 방사체 길이가 길수록 증가하는 경향을 나타내었고, Right angle type이 Rounding type에 비하여 연료소비량이 약간 높은 것으로 나타났다.

  • PDF

Hot Fire Tests of the KSR-III Sub.(I) Engines (KSR-III 축소형(I) 엔진의 연소 시험)

  • Kim, Y.H.;Kim, Y.W.;Moon, I.Y.;Ko, Y.S.;Lee, S.Y.;Ryu, C.S.;Seol, W.S.
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.30 no.8
    • /
    • pp.120-125
    • /
    • 2002
  • In the preceding tests using the KSR-III Sub.(I) engines, it was observed that the heat resistant capability of the engines was not enough for the mission. So Sub.(I) Mod. engines were designed and tested. The Sub.(I) Mod. engines have three major design parameters - the arrangement of main injectors, the impinging angle of main injectors and thermal barrier coating. More than twenty experiments were carried on to evaluate engine performance and heat resistance capability with respect to design parameters. In this study, the test results are introduced. Analysing the result of Sub.(I) engine tests, it is found that decreasing the impinging angle, adopting the H-type arrangement(rather than radial type arrangement) and adopting the thermal barrier coating can increase heat resistance capacity substantially. Also, engine performance evaluation is conducted using specific impulse and characteristic velocity parameter. The results show that the performance variation is small(about 5%) and the performance is better in the case of radial arrangement. It is suspected that these phenomena are caused by the change of flame structure atomization mixing characteristic of sprays and the distortion of recirculation zone. Also from the low frequency instability point of view, it is observed that reducing the impinging angle and adopting the H type arrangement can increase the instability characteristics.

Dynamic Characteristics Simulation for a Simplex Swirl Injector (스월 인젝터의 동특성에 대한 수치해석 연구)

  • 박홍복
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.34 no.9
    • /
    • pp.67-75
    • /
    • 2006
  • A fully nonlinear model accounting for swirling effect has been applied in analyzing the dynamic response for a classical swirl injector. The current work applied highly accurate Boundary Element Methods (BEMs) in assessing its static and dynamic characteristics. On the basis of moving surface treatment method and surface instability study, which are obtained from the previous static characteristics analysis in pressure-swirl injectors, this work was expanded for analyzing the dynamics of a classical swirl injector. The dynamic response through injector components for disturbed inflow condition was investigated. The modified code was validated from comparison with the theoretical result for a typical swirl injector. Clearly the simulated result shows the interesting characteristics of swirl injectors to provide either amplification or damping of the input disturbance through each component. These results give promise in applying the current model to nonlinear dynamic characteristics of swirl injectors.

Effect of Drying Conditions of Steamed Egg Yolk on Acid Value of Duck Egg Yolk Oil (증자 난황 건조 조건이 오리 난황유 산가 변화에 미치는 영향)

  • 류일환;정인택;이갑상
    • The Korean Journal of Food And Nutrition
    • /
    • v.17 no.2
    • /
    • pp.206-211
    • /
    • 2004
  • It is very important to minimize the acid value of oil in the oil and fat industry, because acid value of oil products are a indicator quality. This study was performed to investigate change of moisture content, acid value and free fatty acid content by drying condition such as drying method, temperature and drying time on steamed duck egg york. Also, change of fatty acid composition by acid value. The acid values, moisture contents and free fatty acid contents were showed comparatively lower value by spray drying and freeze drying than by steam drying. but difference that keep in mind between each drying method was not looked. Whereas moisture content, acid value and free fatty acid content of effect of drying temperature reaches in lowest value. also, did not show change until dry 12hours reaching to lowest value by 3.1, 3.0% and 0.98% after dry 9hours both moisture content, acid value and free fatty acid content. Also, acid value increase, free fatty acid was increased, where unsaturated fatty acid showed that decrease rapidly.

Effect of Coating Materials on the Stability of Spray-Dried Lactobacillus Powder during Storage (코팅된 젖산세균 분말의 저장 안정성에 미치는 효과)

  • Kim, Soojin;Lee, SangYoon;Han, Jong-Kwon;Lee, Jae-Kwon;Choi, Mi-Jung
    • Korean Journal of Food Science and Technology
    • /
    • v.47 no.5
    • /
    • pp.633-638
    • /
    • 2015
  • Lactobacillus is a probiotic that suppresses the growth of pathogens while preventing constipation, diarrhea, and intestinal inflammation. However, various environmental conditions such as pH and temperature affect the growth of Lactobacillus. In this study, Lactobacillus plantarum was encapsulated with starch using a spray dryer to protect the viability of the organism during storage and to increase its acid tolerance. The lower water activity and storage temperature resulting from this method influenced the survival of L. plantarum. In encapsulated Lactobacillus powders, viability of Lactobacillus was increased during storage at $20^{\circ}C$ relative to that of L. plantarum stored at $35^{\circ}C$ in the same water activity conditions. Furthermore, L. plantarum encapsulated in starch with ginger showed increased viability when compared to non-encapsulated L. plantarum stored without treatment. Finally, based on a simulated digestion test, encapsulated L. plantarum survived at a pH of 2, whereas the non-encapsulated L. plantarum did not. Thus, coating the encapsulated powder with these materials was effective in maintaining Lactobacillus viability.

A Study on Galvanic Corrosion properties between differential Al Alloys (이종 알루미늄 합금 간 갈바닉 부식 특성에 관한 연구)

  • Kim, Sun-Ho;Lee, Seul-Gi;Park, Jun-Mu;Park, Jae-Hyeok;Lee, Myeong-Hun
    • Proceedings of the Korean Institute of Surface Engineering Conference
    • /
    • 2018.06a
    • /
    • pp.96-96
    • /
    • 2018
  • 금속재료 중 알루미늄(Al)은 일반적으로 많이 사용되는 철강재에 비해 그 비중이 약 $1/3(2.7g/cm^3)$인 경량이고 열전도율이 약 3배($196kcal/^{\circ}C$, $20^{\circ}C$)로 높은 특성 등을 갖고 있다. 또한 대량생산에 의한 경제성을 가지기 때문에 건축 구조재, 전기 및 가전 등 다양한 산업 분야에서 널리 사용되고 있다. 특히, 위와 같은 특성으로 인해 열교환기의 종류에서 응축기(Condenser) 및 증발기(Evaporator)는 알루미늄(Al)을 널리 사용하고 있다. 하지만 단일 응축기 부품에도 이종 알루미늄 소재가 사용됨에 따라 갈바닉 부식이 발생할 수 있다는 단점이 있다. 따라서 본 연구에서는 현재 상용되고 있는 열교환기 중 응축기에서의 이종 알루미늄 재료로 인해 나타나는 갈바닉 부식 특성을 관찰-분석-연구 하였다. 본 연구에 사용된 알루미늄 재료는 현재 응축기 재료 중에서 각각 Tube와 Fin으로 널리 상용되고 있는 Al 1100과 Al 3003을 사용하였다. 표면 모폴로지는 SEM을 통해 관찰하였고 EDS를 통해 조성원소를 분석하였다. 또한 내식성 평가를 위해 5% NaCl 환경에서의 SST(Salt spray test, 염수분무시험) 시험과 3% NaCl 용액 내 자연침지 시험 및 탈기된 3% NaCl 용액 내 전기화학적 동전위 양극 분극 시험을 진행하였으며 더불어 갈바닉 부식 시험에 따른 혼합 전위 측정 및 외관 관찰을 하였다. 각 재료는 실험에 대해 동일한 표면적을 노출시켜 시험하였다. 5% NaCl 환경에서의 염수분무 시험 결과 Fin(Al 3003)의 경우에는 Tube(Al 1100) 보다 빠른 부식거동을 보이며 국부적인 공식부식(Pitting corrosion)이 촉진되었다. Tube(Al 1100)의 경우에는 치밀한 Al2O3 형성과 부식에 따른 Al(OH)3를 생성함에 따라 Fin(Al 3003)에 비해 느린 부식거동을 보였다. 3% NaCl 용액 내 자연 침지 및 전위 측정 결과 초기 전위는 Fin(Al 3003, 약 -0.85V/SCE)이 Tube(Al 1100, 약 -1.05V/SCE)에 비해 더 높은 값을 가지며 약 72시간 이후 Tube(Al 1100) 시편이 더 안정적인 전위 값을 나타냈다. 이는 안정적인 Al(OH)3 피막 형성에 기인한 것으로 사료된다. 탈기된 3% NaCl 용액 내 전기화학적 동전위 양극 분극 시험 결과 Fin(Al 3003) 시편에서 더 귀한 부식 전위 값을 나타냈지만 부식 전류는 더 낮은 값을 나타냈다. 상기 시험 결과를 바탕으로 Fin-Tube 간 장기간 접촉 시에는 갈바닉 부식이 발생할 수 있을 것으로 사료된다. 갈바닉 부식 시험 결과 초기 혼합 전위는 약 -1.05 V/SCE를 나타냈으며 약 288시간 경과 후 약 -0.85 V/SCE 값을 나타냈다. 이는 자연 전위 측정 및 동전위 양극 분극 시험에서의 부식 전위 값에서 알 수 있듯이 더 비한 전위인 Tube(Al 1100) 시편이 Fin(Al 3003) 시편에 대해 희생양극적(Sacrificial anode)인 역할을 한 것을 확인할 수 있었다. 또한 갈바닉 부식 전위 측정 간 외관 관찰에서도 Tube(Al 1100) 시편은 빠르게 흑변 하는 것을 확인할 수 있었으며 Fin(Al 3003) 시편은 침지 300시간 이후에도 초기와 유사한 표면 상태 및 광택을 유지하였다. 이상의 SST 시험, 자연 침지 시험, 전기화학적 양극 분극 시험 및 갈바닉 부식 시험 결과를 바탕으로 단일 부품 내 이종 알루미늄 소재 간 접촉 및 그에 따른 갈바닉 부식 발생을 확인할 수 있었다. 따라서 동종 성분이라고 할지라도 단일 부품 제작 시에는 그 사용 환경에 따라 이종 금속 재료의 사용에 대한 재고가 필요할 것으로 사료된다.

  • PDF

유기농 이유식 제품 제조 기술 현황과 소비 전망

  • Sin, Hyeon-Ho
    • 한국유가공학회:학술대회논문집
    • /
    • 2006.06a
    • /
    • pp.29-45
    • /
    • 2006
  • 최근에 들어 웰빙(well-being)과 함께 로하스(LOHAS: Lifestyle of Health and Sustainability)란 개념이 급속도로 확산되고 있으며, 이를 만족하는 식품으로 친환경 농산물과 유기 가공 식품이 대두되고 있다. 여러 마케팅 조사에서도 친환경 농산물과 유기 가공 식품의 소비자 선호도는 상당히 높게 나타난다. 이러한 다양한 소비자의 요구에 맞춰 우리의 2세에게 더욱 안전하고 좋은 품질의 이유식을 제공하고 나아가 한계에 이른 '지구와 환경을 해치지 않는 지속가능 한 소비'를 유도하고자 업체들은 유기농 이유식을 개발하고 있다. 유기농 소비자 10명 가운데 7명은 최근의 웰빙 붐 때문에 유기농에 관심을 가지게 됐으며, 가격이 다소 비싸더라도 가족의 건강을 위해 친환경 농산물을 구입하는 것으로 나타났으며, 국내외를 막론하고 친환경 농산물과 유피 가공 식품의 시장 동향을 살펴보면 지속적으로 증가하고 있으나, 아직까지 일반 제품에 비해 미미한 수준이며, 국내는 인증 제도가 없으나, 유기 가공 식품표시기준에 따라 표시되고 있다. 일반적으로 이유식이라 함은 식품공전에서 영 ${\cdot}$ 유아용 곡류 조제식만을 말하지만 넓게 축산물의 조제유류, 영아용 조제식, 성장기용 조제식, 기타 영 ${\cdot}$ 유아식을 포함할 수 있으며, 유기농 이유식 제조 현황을 살펴보면 동결, 분무, 드럼 등의 건조와 퍼핑이나 Extruder를 통한 알파화로 원료를 가공하여 은 살균, 멸균, 균질, 혼합, 건조, 냉각, 포장 등의 다양한 공정으로 이루어진 분무건조나 유동층이나 연속식 과립기를 사용하여 분말이나 입자형 이유식을 생산하며, 동결 건조를 하여 열수를 가해 죽 상태로 먹을 수 있도록 한 제품, 데워서 떠 먹일 수 있도록 병조림이나 레토르트 유동식 제품, 바로 마실 수 있는 쥬스류, 두유류, 과자 등으로 생산하고 있다. 주된 메이저4사는 일동후디스, 남양유업, 매일유업, 파스퇴르유업으로 다양한 제품들을 생산하고 있으며, 두유를 위주로 한 정식품, 연세우유와 종근당건강, 다양한 다국적 기업들의 제품이 수입되고 있는 실정이다. 이유식 시장도 96년 하반기부터 정체를 보이는 상태다. 2002년도 이유식 시장은 약 1,300억원 규모로 업체들의 고가 신제품과 유기농 이유식 출시로 판매 금액은 소폭 상승하였으나 판매 수량은 큰 변동이 없다. 저출산에 따른 양육비 집중과 유기농 제품에 대한 저변이 크게 확산돼 베이비 웰빙은 어느 정도 예견된 일이거니와 이미 미국 등 선진국에선 유아에 그치지 않고 아동까지 유기농과 고급 원료를 사용한 고가의 웰빙 제품이 봇물을 이루고 있는 상황이어서 유아식 시장은 어느 때보다 경쟁이 치열할 것이며, 국내 식품 업체들이 너도나도 유기농 제품과 매장사업에 뛰어들고 있다. 유기 가공 식품의 지속적인 발전을 위해서 (1) 국내산/수입산 공통으로 인증 제도가 도입되고 원료 농산물뿐만 아니라, 모든 공정이나 공장에 대한 종합적 관리와 동일한 인증 표시가 이루어져야 한다. (2) 정부 부처의 이기를 타파할 수 있는 법정부적 기구나 대책이 필요하다. (3) 유기 가공 식품을 취급하는 업계에서는 기존 3%의 비의도적 혼입치의 고려나 상한선 재설정을 요구하고 진정한 유기 가공 식품으로 공정 경쟁한다. (4) 활발한 인증심사원의 교육과 배출로 인증이나 심사기관의 민간 이양을 적극 장려하고 국가관 상호 신뢰를 구축한다. (5) 각 소비자 단체나 소비자는 환경을 살리고 생명체의 공생이라는 관점에서 최선의 길이 유기농 제품임을 인식하고 소비하여 우리의 다음 세대에게서 빌려온 소중한 환경을 물려준다.

  • PDF

Physicochemical Property and Release Behavior of Ibuprofen Solid Dispersion with Cellulose Acetate Prepared with Various Methods (이부프로펜과 셀룰로오스아세테이트의 고체분산체 제조방법에 따른 물리화학적 성질 및 용출 특성)

  • Lee, Eun-Yong;Oh, Myeong-Jun;Kim, Se-Ho;Seong, Kyong-Yeol;Lee, Young-Hyun;Kim, Soo-Jin;She, Han-Sol;Lee, Dong-Won;Khang, Gil-Son
    • Polymer(Korea)
    • /
    • v.35 no.2
    • /
    • pp.113-118
    • /
    • 2011
  • Solid dispersion is used to improve the solubility of water-insoluble drug. Release properties depend on the characteristics of polymer and the physicochemical properties of solid dispersion. In this study the solid dispersions of ibuprofen and cellulose acetate were prepared using spray-drying and rotary evaporation. The physicochemical properties of the solid dispersions were analyzed by SEM, XRD, DSC, and FTIR. The hydrophilicity of polymer was analyzed by measuring the contact angle of water. The results of DSC and XRD analysis demonstrated that the crystallinity of ibuprofen was changed by solid dispersion preparation. The results of contact angle showed that hydrophilicity was proportional to polymer content. Release profile showed that for solid dispersion. the release rate of ibuprofen decreased as polymer content increased in intestinal juice (pH 6.8). The dissolution rate of ibuprofen was improved with increasing polymer content in gastric juice (pH 1.2).