• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.11
• /
• pp.2526-2533
• /
• 2015

In this paper, a design method for a compact dual-band coplanar waveguide-fed slot antenna using SRR(split-ring resonator) conductor is studied. The SRR conductor is loaded inside a rectangular slot of the proposed antenna for dual-band operation. When the SRR conductor is inserted into the slot, the original rectangular slot is divided into a rectangular loop region and a rectangular slot region, and frequency bands are created by the loop and slot, separately. A prototype of the proposed dual-band slot antenna operating at 2.45 GHz WLAN band and 3.40-5.35 GHz band is fabricated on an FR4 substrate with a dimension of 30 mm by 30 mm. Experiment results show that the antenna has a desired impedance characteristic with a frequency band of 2.38-2.51 GHz and 3.32-5.38 GHz for a voltage standing wave < 2, and measured gain is 1.7 dBi at 2.45 GHz, and it ranges 2.4-3.2 dBi in the second band.

• Journal of the Korean Vacuum Society
• /
• v.4 no.4
• /
• pp.350-357
• /
• 1995

SiH4와 Si2H6를 1-3 Torr 정도의 저압에서 열분해시켰을 때, 반응물의 농도 변화를 살펴보고 이로부터 열분해의 반응 기구를 예측하였다. 분석기로는 질량 분석기를 이용하였으며, 분해 온도 범위는 SiH4의 경우는 $350~475^{\circ}C$, Si2H6의 경우는 275-375$^{\circ}C$이었다. SiH4의 분해 양상은 1차 비가역 반응에 잘 들어 맞았으며, 그 속도 상수는 문헌에 보고되어 있는 상압에서의 속도보다 작았다. Si2H6는 낮은 온도 범위에서도 잘 분해되었으며, 중간 생성물로 많은 양의 SiH4를 만들었다. 그리고, SiH4는 고분자화되는 반응을 거치지 않고 고체실리콘을 생성하지만, Si2H6는 중간 생성물로 만들어진 SiH4와 SiH2에 의하여, 고분자화 반응을 거쳐서 고체실리콘을 만들 수 있음을 알았다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.10
• /
• pp.2351-2358
• /
• 2014

In this paper, a design method for a compact CPW-fed slot antenna using SRRs is studied. The structure of the proposed slot antenna is a rectangular slot antenna loaded with SRR conductors inside the slot to reduce the antenna size. Optimal design parameters are obtained by analyzing the effects of the gap between the SRR conductors and slot, and the width of the SRR conductors on the input VSWR characteristic. The optimized compact slot antenna operating at 2.45 GHz band is fabricated on an FR4 substrate with a dimension of 36 mm by 30 mm. The length of the proposed compact slot antenna is reduced to 14.3% compared to that of a conventional rectangular slot antenna. Experiment results show that the antenna has a desired impedance characteristic with a frequency band of 2.4-2.49 GHz for a VSWR < 2, and measured gain of 2.3 dBi at 2.45 GHz.

• Journal of the Korean Professional Engineers Association
• /
• v.44 no.1
• /
• pp.32-33
• /
• 2011

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.412-415
• /
• 2017

In this study, the decomposition performance of ammonia dinitramide (ADN) based liquid monopropellant was evaluated by using metal supported alumina bead catalyst. Alumina bead was calcined at $1200^{\circ}C$, and Pt and Cu were impregnated on alumina bead by excess water impregnation using a rotary evaporator. The decomposition temperature ($T_{dec}$) of ADN-based liquid monopropellant was measured in a home-made batch reactor. The decomposition temperature of Cu/$Al_2O_3$ catalyst was lower than that of Pt/$Al_2O_3$ catalyst, and $T_{dec}$ was about $130^{\circ}C$.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.8
• /
• pp.721-728
• /
• 2009

Equal/unequal 4-way power divider suitable for satellite communication using SIW technology is presented in this paper. The control of positions of guiding posts provides equal or unequal power division ratios by maintaining the width of the SIW unchanged. In addition, the detailed descriptions for the proposed power divider include the general characteristics of radial waveguide, feeding part using coaxial cable, simple SIW structure, power-guiding posts, and transition for measurement. The comparison between the simulated and measured data shows a good agreement at a center frequency of 10 GHz. The measured input impedance bandwidths for equal and unequal power divisions are about 2.1 GHz and 3 GHz under the condition of less than VSWR 2:1, respectively.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2012.05a
• /
• pp.100-103
• /
• 2012

The blending method that is an addition of small quantity of fuel was used to increase the performance of green propellant thruster. 90 wt.% hydrogen peroxide as a green propellant was selected, and ethanol was used as a blended fuel. The o/f ratio was chosen as 50 which has higher theoretical performance than 98 wt.% hydrogen peroxide. The chamber temperature of blended hydrogen peroxide was higher than adiabatic chamber temperature of hydrogen peroxide. Therefore, performance can be improved by ethanol blending. Several catalyst and its support were compared to find appropriate catalyst for decomposition and combustion of ethanol blended hydrogen peroxide. As a experimental results, Pt was suitable, but $MnO_2$ had a chamber instability when it was reused. The ${\alpha}-Al_2O_3$ which is high heat-resistant support showed very unstable performance in both Pt and $MnO_2$ catalyst since it has low decomposition performance.

• Korean Journal of Environmental Biology
• /
• v.18 no.3
• /
• pp.323-330
• /
• 2000

Early life history and spawning for Odontobutis interrupta were observed in the laboratory during May-August 1999 with a condition of natural habitats in the field. Optimal water temperature for spawning was between 17.5 and 22.$0^{\circ}C$ and appropriate water depth and current velocity in the natural habitat ranged 0.3-0.6 m and 0.1-0.3 m/sec, respectively. Ovary maturation index peaked at about 100mm in the total length and their values gradually decreased after the size. Male fishes showed a territory and courtship behavior to adult females and the males frequently pushed upper-ventral part of females for egg releases. After females spawned, the males guarded the egg masses and supplied dissolved oxygen using pectoral fins. According to observation of egg development in the laboratory, blastodisc formed in 1hr 17 min after the fertilization, cleavaging at 36-minute interval regularly. Blastulation occurred in 7 hr 12 min after the fertilization, with gastrulation after 11 hr 11 mins and formation of york plug after 32 hr 48 min. Embryo was formed in 33 hr 45 min after fertilization and optic vesicles appeared in 47 hr 27 mins when 30-31 somites were formed. Cardiac primordium was formed in 65 hr 15mins and its beat averaged 44- 48 time/min. Pectoral fins were formed in 138 hr 40 min, air-bladder and black vesicles were observed in lower portion of young fish. Embryo hatched from she-11 membrane after about 10 days and juvenile was 5.8$\pm$0.2mm in total length 3.0$\pm$0.5mg in weight.

• Journal of the Korean Society of Radiology
• /
• v.13 no.6
• /
• pp.841-846
• /
• 2019

Effect of misalignment on the performance was evaluated for the development of time-of-flight(TOF)-PET detector. A pair of TOF-PET detector consists of Lutetium-yttrium oxyorthosilicate(LYSO) scintillation crystal with a volume of 3 mm × 3 mm × 20 mm and Geiger-mode avalanche photodiodes(GAPD) photo-sensor with a active area of 3.07 mm × 3.07 mm. Analog output signals from TOF-PET detector were sent to the pre-amplifier and then fed into the gain adjust circuit for achievement of gain homogeneity for each detector. The amplified signals were recorded and digitized by data acquisition system based on oscilloscope. The effect of the detector misalignment between LYSO and GAPD was examined for four different alignment offsets of 0.0 mm, 0.5 mm, 1.0 mm and 1.5 mm for a pair of TOF-PET detector. The photopeak position decreased from ~400 mV to ~250 mV with increasing detector misalignment. the energy resolution and time resolution were degraded from 11.6% to 16.2%, and from 477 ps to 632 ps, respectively. This study demonstrated that PET detector performance was degraded considerably depending on the detector misalignment, which would be a critical issue for the development of TOF-PET detector.

• 사회경제평론
• /
• v.31 no.3
• /
• pp.239-270
• /
• 2018

This study empirically analyzed the labor income share of primary and subcontractors. The results are as follows. First, panel regression analysis showed that the variables of transaction concentration, outsourcing cost, capital intensity, and market share had a significant negative effect, while union organization rate and R & D investment had positive effects. In particular, the R & D variable had a negative effect on the share of labor income in the year of investment (t), but had a positive impact on the long-term (t-1, t-2). Second, the share of labor income during the last 11 years (2006~2016) was higher in subcontractors with lower wage levels. This analysis implies that the wage inequality between the primary and subcontracting enterprises can not be eliminated without improving the solvency of subcontractors.