• Title/Summary/Keyword: 분리막 모듈

Search Result 151, Processing Time 0.028 seconds

The Membrane Surface Velocity of YEF(Vonsei End Free) Module by Aeration (YEF(Yonsei End Free) 모듈의 산기에 의한 표면 유속)

  • 윤희성;권오성;윤소담;양형모;노수홍
    • Proceedings of the Membrane Society of Korea Conference
    • /
    • 2004.05b
    • /
    • pp.94-97
    • /
    • 2004
  • 수처리를 위한 분리막은 정수, 하수 및 오폐수 처리등 그 사용이 나날이 증가하고 있고, 막분리 공정의 경제성을 결정하는 막오염에 대한 연구가 활발히 이루어지고 있다. 분리막 표면의 오염 물질을 제거하기 위하여 표면유속의 증가, 분리막 회전, 진동 등에 의한 물리적 방법들이 사용되었고, 특히 근래에는 시설의 단순화 등을 이유로 침지형 모듈 이용이 증대되고 있으며[1] 특히 단위면적당 높은 막면적을 갖는 중공사막 침지형 모듈의 이용이 증가하고 있다.(중략)

  • PDF

Single Rotary Disk 한외여과 모듈의 분리특성

  • 안승호;노수홍
    • Proceedings of the Membrane Society of Korea Conference
    • /
    • 1993.04a
    • /
    • pp.56-58
    • /
    • 1993
  • 한외여과공정에서 막 표면의 Fouling 현상은 막분리공정의 경제성을 결정하는 중요한 변수가 된다. 막의 Fouling을 줄이기 위해서 Fouling이 잘 안되는 분리막 재질의 개발, 막표면의 농도분극 현상을 최소화 시키는 막모듈의 개발, Fouling된 막의 세척에 관한 연구, 전처리 기술개발 등의 연구가 수행되었다.

  • PDF

중국의 막분리 기술 및 응용 현황

  • 김수용
    • Proceedings of the Membrane Society of Korea Conference
    • /
    • 1998.04a
    • /
    • pp.8-15
    • /
    • 1998
  • 1. 서론 : 중국에서 분리막에 관한 연구는 1965년부터 역삼투막에 관한 연구를 시작으로. 70년대 초기부터는 한외여과막(UF막)에 관한 연구가 수행되었다. 이후 정밀여과막(MF막), 기체분리막(GS막) 등에 관한 연구가 이루어져 수처리 분야 및 기체분리 공정 등에 실용화되고 있다. 특히 80년대 초기부터 10년간으 실험실 연구단계에서 산업화로 넘어온 시기로서 막분리 기술이 크게 발전되었다. 이때에 주요한 연구성과는 다음과 같다. 수행되었다. 1) 호주의 수처리 설비공장과 흥성의 8271공장은 매년 몇 천대의 나권형 모듈을 제조할 수 있는 RO막 생산라인을 건립하고, 국가해양국 항주 수처리기술개발센터의 중공사막 제조라인은 1,000만원/년의 생산능력을 갖고 있다. 2) 대형 중공사막, 나권형 모듈제조 기술이 확립되어, 국산 RO, UF모듈 및 장치는 초순수 제조 및 발전소 보일러 용수의 정화에 사용되어 수입 사용되는 외국장치를 대체하게 되었다. 3) 막분리 기술의 연구 및 응용공정 개발에 관한 연구 인력은 당시 초보적인 소수의 연구원이 형성된 이후, 지금은 전문연구인력이 400여명에 이르고 있다. 본고에서는 중국에서 응용되고 있는 분리막 기술중 RO막, UF막, MF막 및 NF막을 중심으로 기술개발 동향 및 현황을 소개하고자 한다.

  • PDF

Development Trend of Composite Materials for Membrane Hosuing (분리막 하우징용 복합소재의 연구개발 동향)

  • Kim, Deuk Ju;Nam, Sang Yong
    • Membrane Journal
    • /
    • v.26 no.1
    • /
    • pp.14-25
    • /
    • 2016
  • The membrane separation process is growing very fast because of the high efficiency and low cost compared with other traditional process. The membrane process consists of various components such as membrane, module and mechanical part. The requirements for materials used in the membrane separation are becoming more and more demanding for achievement of high efficiency. Membrane module is also considered as the one of the key component in the membrane system. Recently composite materials have been considered as the membrane housing due to their excellent property and low cost compared with stainless module. In this review, a various types of glass fiber and composite material are summarized and their potential for the application of membrane system is discussed.

Study on application of membrane for wastewater in biogas plants (BGP(Biogas Plant) 발생폐수의 분리막 적용 연구)

  • Kim, Shin-Young;Chang, In-Soung;Kim, Jang-Kyu;Yu, Myeong-Jung
    • Proceedings of the KAIS Fall Conference
    • /
    • 2010.11a
    • /
    • pp.503-503
    • /
    • 2010
  • 국제협약에 따라 2012년부터 유기성폐기물의 해양배출이 금지됨에 따라 환경문제를 유발하는 축산분뇨, 음식물쓰레기, 농축산 폐기물 등의 처리가 곤란한 실정이다. 그러나 최근 저탄소 녹색성장으로 정부가 폐자원 에너지화에 관심을 기울이면서 위의 폐기물을 바이오가스로 전환하는 바이오가스 플랜트(Biogas Plant, BGP)의 이용이 보다 활성화 될 전망이다[1]. 이 바이오가스 처리방법에서 유기물은 메탄가스로 배출되고[2], 나머지 영양성분들(질소, 인산, 칼륨 등)은 모두 소화액에 남아있으므로[3] 이들은 친환경농업에서 필요한 액비로도 활용이 가능하며, 혐기소화 처리방법은 일반적인 가축분뇨 처리과정에서 발생되는 악취문제도 해결할 수 있는 장점 또한 가지고 있다. BGP는 유기성 폐기물에서 혐기성소화를 통해 바이오가스를 만드는 장점이 있는 반면, 가스를 만들고 남은 소화액은 액비로 활용이 가능하지만, 액비로 활용이 불가능할 경우 악성 폐수로 그 처리가 매우 까다로운 단점이 있다. 일반적인 생물학적인 폐수처리방법으로는 처리가 곤란하며, 환경기준을 맞추도록 처리하는데 많은 비용이 소요된다. 이러한 폐액처리를 위해 공정의 단순화와 높은 처리 효율[4]을 가지면서, 액비 또는 정화처리공정이 가능한 방법으로서 분리막공정이 바람직하나, BGP 발생폐액의 성상이 고농도의 오염물질을 함유하고 있어 적용이 쉽지 않다. 따라서 본 연구에서는 이를 보안할 수 있는 와류발생형 막모듈을 이용하여 Biogas Plant의 발생폐수에 대하여 분리막을 이용한 효과적인 처리공정을 개발하고 그에 따른 최적의 조건을 찾는 연구를 하고자 한다. 와류발생형 막모듈을 막과 막 사이에 와류를 발생시킴으로써 막에 전단력을 가하여 막의 가장 큰 단점인 막오염을 줄이는 방법으로 기존의 막모듈과 큰 차이가 있을 것으로 예상된다. 본 연구에서는 기존의 분리막 모듈[5]과 와류발생형 막모듈의 차이를 실험을 통해 확인하며, 막에 가해지는 압력, 막을 통과하는 유량 등의 차이를 두어 최적조건을 탐색하였다.

  • PDF

Numerical Analysis of Concentration Polarization for Spacer Configuration in Plate Type Membrane Module (평판형 분리막 모듈 내 스페이서 형태에 따른 농도분극에 관한 수치해석)

  • Shin, Ho Chul;Chung, Kun Yong
    • Applied Chemistry for Engineering
    • /
    • v.22 no.6
    • /
    • pp.703-710
    • /
    • 2011
  • As the spacer in the membrane module provide the channel space to flow the feed solution smoothly and induce the flow turbulence, it could help to reduce both the concentration polarization and to take the long-term operation of membrane modules with high permeate flux by mixing the accumulated contaminants on the membrane surface into the bulk solution. In this study, the concentration distribution in membrane module with respect to the spacers which have the cross-sectional shapes of circle, cross, diamond and hexagon, the angles of spacer configuration, solute rejection and permeate flux were interpreted and optimized numerically using the "COMSOL Multiphysics" software. The concentration on the membrane surface was kept the lowest level for the cross-shape among the above four types of spacers. Also the 30 degree spacer configuration was showed as the most efficient case. The concentrations on the membrane surface at the module outlet for without spacer and the cross shape with the 30 degree spacer configuration were 2.09 and 1.29 times higher than those at inlet, respectively. The reduction effect of concentration polarization increased rapidly as the permeate flux increased.

Simulation on Recovery of Methane Greenhouse Gas from Biogas Using 3 Stage Membrane Modules (바이오가스로부터 온실가스 메탄 회수를 위한 3단 분리막 공정 모사)

  • Lee, Yongtaek
    • Membrane Journal
    • /
    • v.28 no.4
    • /
    • pp.243-251
    • /
    • 2018
  • Methane is one of the important greenhouse gases and methane is the major component of the biogas. A multiple stage membrane process was developed and analysed with the numerical analysis so that the mole fraction of methane in the final product could be kept higher than 0.95 and simultaneously the recovery of methane was also maintained higher than 99% from the biogas using 3 polysulfone hollow fiber membrane modules which were properly connected. As the feed pressure of the biogas, the mole fraction of methane in the biogas and the membrane area in the membrane module are increased, the methane mole fraction of the final product are found to be increased. However, a proper membrane area in the module should be carefully selected in order to achieve the satisfactory goal of 0.95 mole fraction of methane and 99% recovery of methane from the biogas. Even if the multiple membrane process is utilized with the properly selected membrane modules, the limited operating ranges have to be applied in the following parameters : the feed pressure, the flow rate, the mole fraction of methane in the biogas to get both the target methane concentration and the recovery rate of methane.

Recovery of Useful Components from Rice-washing Water Using Membranes (분리막을 이용한 쌀뜨물내 유효성분의 회수)

  • 정건용;박성희
    • Membrane Journal
    • /
    • v.12 no.3
    • /
    • pp.165-170
    • /
    • 2002
  • Membrane process was investigated to recover useful components, such as protein from rice-washing water generated in the production of the washed-rice. The filtration experiments were carried out using not only a dead-end Amicon cell to determine suitable membranes but also a hollow fiber ultrafiltration, spiral wound nanofiltration and reverse osmosis modules for home water purification. Ultrafiltration module(molecular weight cut-off : 10,000 dalton) was not suitable for recovery of useful components or protein in the rice-washing water, but nanofiltration and reverse osmosis modules showed a good performance. in the case of 250% concentration of the rice-washing water contained about 9% protein the proteins in concentrates of nanofiltration and reverse osmosis were 18% and 22%, which were about 2 and 2.4 times higher protein concentrations than those of feed, respectively.

Evaluation of the Flux According to Membrane Distillation Module Structure and Operating Conditions Using PVDF Hollow Fiber Membrane (PVDF 중공사 분리막을 이용한 MD 모듈 구조 및 운전 조건에 따른 플럭스 영향 평가)

  • Min, Ji Hee;Lee, Seul ki;Gil, Nam Seok;Park, Min Soo;Kim, Jin Ho
    • Membrane Journal
    • /
    • v.28 no.2
    • /
    • pp.83-89
    • /
    • 2018
  • Hydrophobic porous PVDF hollow fiber membranes for Membrane Distillation (MD) were fabricated by a combination of thermally induced phase separation (TIPS) and stretching. The purpose of this study is to investigate the shape and operating conditions of the module and the effect of piping size on parallel connection. In the optimization experiment of the vacuum membrane distillation module, the flux decreased as the packing density and length of the membrane in the module increased. When the module was connected vertically, it was confirmed that the nearest to the inlet of the vacuum port was the highest flux. In selecting the size of the header pipe of the module, it was confirmed that the maximum flux is shown when the inner diameter area of the hollow fiber membrane and the inner diameter area of the header pipe are the same. Also, it is necessary to find the optimal linear velocity because the higher the linear velocity in the module, the higher the flux, but the pressure acting on the module also increases proportionally.

Scparation and volume reduction of emulsion solution by using rotary disk membrane module (회전원판형모듈을 이용한 Emulsion용액의 분리 및 농축)

  • 김제우;노수홍
    • Proceedings of the Membrane Society of Korea Conference
    • /
    • 1994.10a
    • /
    • pp.81-83
    • /
    • 1994
  • 막분리공정을 이용한 폐수처리는 오염을 제어할 뿐만 아니라 유용한 성분의 회수라는 측면에서 실용화되고 있다. 일반적인 십자흐름식 여과방식에서 fouling을 최소화하여 투과율을 높히기 위해 선속도(linear velocity)가 필요하며, 에너지 소비가 커진다. 그러나, 막을 회전시켜 shear Sterss를 발생시키고 강한 난류형성으로 농도분극 현상을 최소화시켜 높은 투과율을 얻을 수 있는 회전원판형모듈(rotary disk membrane module)을 기름 emulsion용액의 분리효율에 대하여 조사하고, 폐수처리 및 재활용 적용가능성을 고찰하였다.

  • PDF