• Journal of Korean Society of Transportation
• /
• v.28 no.2
• /
• pp.161-169
• /
• 2010

The amount of energy consumed by a transportation system in a city is influenced not just by a transportation system itself but also by city's spatial character. Yet there have been very limited studies on this subject. This study investigates the factors that influence the energy consumption by a transportation system and city's spatial character. The model of an urban area confined within a definite boundary is assumed in order to develop the relationships between the energy consumption and the transportation system. Various assumptions on the character of a city and activities are made. An equation for computation of the energy consumption is derived with such factors as modal split, densities of residents and workers, as well as technological development. Using the equation, sensitivity analyses are performed in order to identify the relationships between energy consumption and influencing factors. It is found that the modal split is the most powerful factor that determines the energy consumption by the transportation system. Yet it is also found that the densities of residents and workers and the technological factors are very important in determining the amount of energy consumption as well.

• Journal of the Korean Geotechnical Society
• /
• v.35 no.1
• /
• pp.17-30
• /
• 2019

This study presents the application of the numerical and analytical technique to simulate the Load Distribution Ratio (LDR) and to define axial stiffness on reinforcing pile foundation ($K_{vr}$) in vertical extension remodeling structure. The main objective of this study was to investigate the LDR between existing piles and reinforcing piles. Therefore, to analyze the LDR, 3D FEM analysis was performed as variable for elastic modulus, pile end-bearing condition, raft contacts, and relative position of reinforcing pile in a group. Also, using the axial stiffness ($K_{ve}$) of existing piles, the axial stiffness of reinforcing pile was defined by 3D approximate computer-based method, YSPR (Yonsei Piled Raft). In addition $K_{vr}$ was defined by reducing the $K_{ve}$considering the degradation of the existing piles.

• Journal of Korean Society of Transportation
• /
• v.16 no.4
• /
• pp.7-20
• /
• 1998

우리나라 택시의 경우, 이용측면에서나 수송분담률측면에서 볼 때 대중교통에 가까운 역할을 담당하고 있다고 할 수 있으나, 적정 택시대수를 산정하는 모형이 정립되지 않아 택시증차규모 결정시 이해관계자들의 마찰로 사회적 물의를 일으키며 이를 조정하는데 행정력이 낭비되고 있는 실정이다. 이에 본 연구에서는 택시 이용자와 업체 그리고 운전기사의 입장이 반영된 적정 실차율, 교통여건, 이용객수의 변화 들을 고려한 중소도시에서의 택시 증차대수 산정을 위한 합리적 기준이 제시되었으며 현재의 운행기록에 의한 거기기준실차율조사의 문제점을 개선한 새로운 택시 실차율 조사방법의 적용성이 검토되었다. 새로운 실차율 조사방법으로 부도심상의 주요 가로를 통과하는 택시에 대한 차량기준실차율을 조사하여 종래의 운전자의 운행기록표에 의한 거리기준 실차율과 비교하였다. 두 방법에 의한 실차율이 매우 근사한 값을 보였으며 통계적 검정에서도 차이가 없는 것으로 나타났다. 차량기준방법에 의한 실차율조사로 조사비용을 줄이고 자료의 신뢰성을 높일수 있을 것으로 기대된다.

• Journal of the Korean Geotechnical Society
• /
• v.36 no.8
• /
• pp.61-72
• /
• 2020

It is generally considered that differences of axial stiffness between exiting pile and reinforcing pile affect the load distribution ratio during vertical extension remodeling. But there are few cases to verify the effect of stiffness by field load test on load distribution ratio in Korea. In this paper, a series of load tests for micropiles were carried out to evaluate the effect of axial stiffness on the load distribution ratio. First, different types of micropiles were constructed so that conventional micropiles simulated existing piles and waveform micropiles simulated reinforcing piles. Secondly, load tests were performed to evaluate the stiffness of each piles. After then, the raft was installed to make a piled raft system and load tests were applied on foundation to verify the effect of axial stiffness on the load distribution ratio. The experimental results show that the stiffness of waveform micropiles were 2.5 times larger than that of conventional micropiles, and the load distribution ratio between existing and reinforcing piles was increased according to axial stiffness of piles.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.1
• /
• pp.25-34
• /
• 2014

The aim of this study is to analyze the mechanical characteristics and settlement feature of the composite ground with structural form changes. The laboratory model test is a soil tanker to be contained with clay and grid form improved soil, which is conducted in total 9 case with the uniaxial compressive strength of improved soil and replacement ratio of improved soil. The numerical analysis for variation of stress distribution ratio with depth was performed in the same conditions which are the laboratory model test. As a result, stress distribution ratios in mid and high replacement ratio are increasing and settlement is decreasing, except low replacement ratio. This study is presented for form effect ratio and settlement reduction factor with change of structure form, which is able to be helpful in further research and reference for change of structural forms at composite ground.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.4
• /
• pp.21-30
• /
• 2006

In this study, centrifuge model tests were performed to investigate the stress concentration ratio, bearing capacity and deformation modes of piles in clay ground improved by granular piles with two types of pile (CSCP, SCP) and various replacement ratios (0, 20, 40, 60%). According to the results of tests, the load ratio of ground improved by SCP and CSCP proportionally increased as replacement ratio increased. It shows that average normalized load of ground improved by CSCP is higher by about $8{\sim}21%$ than by SCP. As a result of rigid loading tests, it was evaluated that average stress concentration ratio of CSCP is higher than that of SCP. Only expansion failure occurred in CSCP, whereas SCP showed the expansion and shear failure simultaneously.

• Journal of Korean Society of Transportation
• /
• v.28 no.4
• /
• pp.97-106
• /
• 2010

Environmental issues resulting from climate change and energy crises have become global issues, and cycling has gained greater popularity for sustainable transportation. Though many cities are trying to build bicycle roads, it is not easy to implement bicycle roads because there is little available space for bicycle facilities. Therefore, road diets have become more popular in Korea. However, there has been no intensive research to date of their impacts. The purpose of this research is to evaluate the effects of road diets and construction of bike lanes. Every benefit, including energy benefit, environmental benefit, and health benefit is considered, while only time savings benefit has been considered in previous studies. The benefit analysis for the Seoul metropolitan area as a case study shows that road diets have a (1) time saving benefit for only five percent of the mode share and (2) enough total benefit even if bicycle mode share is less than two percent.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.11a
• /
• pp.205-206
• /
• 2017

The purpose of this paper is to examine a reasonable share of cost in the apartment remodeling projects. Therefore, the case model of remodeling apartment was made up and then the rate of return by method of floor area change rate, method of proportion, method of investment earnings rate and method of proportion reflected business contribution were estimated. Consequently, the model by the method of proportion reflected business contribution presented 20.6% of rate in all apartment units.

• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2015.11a
• /
• pp.175-185
• /
• 2015

본 연구에서는 TOD는 대중교통수단의 분담율 제고가 목적인데 이를 위한 정책대안의 모색에 필요한 새로운 분석기법을 제시하였다. 교통수단의 결정요인은 개인 특성과 라이프스타일 그리고 도시공간특성인데 이 요인들은 상호의존적으로 복합적 결합작용은 한다. 또한 개인과 그룹 및 지역 특성은 서로 다른 차원에서 상호의존성을 갖는다. 전통적 회귀분석과는 달리 위계적 분석모형은 요인들 간의 상호의존성과 복합결합적 영향관계를 규명하는 장점이 있다. 이러한 분석 기법에 의한 결과는 보다 효율적인 TOD정책 대한의 모색에 많은 기여를 할 것으로 기대된다.

• Journal of Korean Society of Transportation
• /
• v.16 no.4
• /
• pp.53-64
• /
• 1998

본 연구의 목적은 '96년말 서울시에서 실시한 가구통행조사를 이용하여 서울시 수단선택모형을 구축하고 그 예측결과를 남산 혼잡통행료 전후저사자료와 비교하여 보다 구체적으로 그 정확성을 검증한 뒤 향후 서울시 교통수요관리 방안의 시행에 따른 수단선택변화 예측의 기본 모형으로 활용하는데 있다. 5가지의 대안모형의 분석결과 통행비용변수(승용차의 경유 주차요금포함)와 총통행시간변수(OVTT와 IVTT의 합), 승용차, 지하철, 택시상수로 구성된 모형이 최적모형으로 분석되었다. 이모형에 의한 시간가치는 9,395원, 승용차의 비용탄력성은-0.6767로서 기존 연구결과의 범위 내에 속한 것으로 나타났다. 최적모형을 이용하여 승용차통행비용이 증가한 경우를 모사분석결과 남산1,3호 터널 혼잡통행료 징수효과와 유사하게 승용차 분담율이 13% 가까이 감소한 것으로 나타나서 모형의 현실적합성도 비교적 높은 것으로 판명되었다. 향후 본 연구에서 선정된 최적수단선택모형을 통행배정모형과 결합하여 다양한 교통수요관리 방안에 따른 효과를 예측하는데 활용하면 서울과 같은 대도시의 단기적 교통관리의 수준을 한 단계 높이는데 기여할 것으로 판단된다.