• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.6
• /
• pp.1175-1177
• /
• 2011

The SBN thin films were deposited on Pt/Ti/$SiO_2$/Si and p-type Si(100) substrate by rf magnetron sputtering method using $Sr_{0.7}Bi_{2.3}Nb_2O_9$ ceramic target. SBN thin films deposited were annealed at 600~800[$^{\circ}C$] by furnace in oxygen atmosphere during 40min. The polarization characteristics have been investigated to confirm the possibility of the SBN thin films for the application to destructive read out ferroelectric random access memory. The maximum remanent polarization and the coercive voltage are 0.6[${\mu}C/cm^2$], 1.2[V] respectively at annealing temperature of 800[$^{\circ}C$]. The leakage current density was the $2.57{\times}10^{-6}[A/cm^2]$ at an applied voltage of 5[V] at annealing temperature of 650[$^{\circ}C$]. Also, the fatigue characteristics of SBN thin films did not change up to $10^8$ switching cycles.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1724-1729
• /
• 2007

Smaller size and higher integration of electronic systems make narrower interconnect pitch not only in chip-level but also in package-level. Moreover electronic systems are required to operate in harsher conditions, that is, higher current / voltage, elevated temperature/humidity, and complex chemical contaminants. Under these severe circumstances, electronic components respond to applied voltages by electrochemically ionization of metals and conducting filament forms between anode and cathode across a nonmetallic medium. This phenomenon is called as the Electrochemical migration

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.309-309
• /
• 2014

음극방식법은 피방식체에 외부전원을 인가하거나 보다 활성인 금속을 전기적으로 연결하여 피방식체의 전위가 일정 전위까지 음극분극 되도록 하여 부식을 억제하는 방법이다. 이러한 음극 방식의 결과로 $OH^-$이온이 금속 표면 부근에 생성되고 금속/해수 사이의 pH 증가를 유발하게 되며, 높은 pH는 $Mg(OH)_2$ 및 $CaCO_3$의 석출을 유발한다. 전착 박막은 각각 1, 3, 6, 12시간 및 5, 15, $20mA/cm^2$의 전류 밀도 조건에서 자연 해수, $CO_2$ 가스가 용해된 해수 용액 내에서 스틸 기판 상에 전기적 증착기술을 가해 형성되었다. 상기 조건에서 증착 된 박막의 내용물은 주사 전자 현미경 (SEM) 및 X-선회절(XRD)에 의해 조사되었다. 또한 코팅 박막의 내식성은 전기화학적 양극 분극시험에 의해 평가되었다.

• Journal of the Korean Ceramic Society
• /
• v.34 no.6
• /
• pp.569-576
• /
• 1997

Electrically-induced strain and polarization studies of the (1-x)Pb(Mg1/3Nb2/3)O3-PbZrO3 crystalline solutions have been done. Dielectric constants with temperature were investigated for 0$\leq$x$\leq$0.95. With increasing PbZrO3 content the transition maxima were found to move to higher temperature region and DPT (Diffused Phase Transition) properties were decreased for x$\leq$0.60. Phase transition between ferroelectric states and antiferroelectric states was confirmed for 0.93$\times$10-3 for 0.4

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2001.05a
• /
• pp.314-319
• /
• 2001

Most parts of facilities in domestic petroleum plants and power plants are needed to be abandoned, repaired or replaced, because in Korea they were built in the 1960s and, they have been used under severe conditions and exposed corrosive environments. 2.25Cr- lMo steels have excellent high-temperature mechanical properties. Therefore, the material have been widely used as heat exchanger tubes, boiler headers and its tubes in such industries. But, those microstructural evolutions in high temperature such as precipitation and carbide coarsening give a reason to degrade the material. Especially, in case of this material, carbides induced embrittlement(CIE) is the primary reason for degrading mechanical properties at over 50$0^{\circ}C$. In this paper, we introduce a electrochemical polarization method for detecting CIE quantitatively.

• Journal of the Korean Ceramic Society
• /
• v.37 no.1
• /
• pp.12-20
• /
• 2000

Dielectric property of Ba-modified 0.65Pb(Mg1/3Nb2/3)O3-0.35PbTiO3 ceramics having compositions near the morphotropic phase boundary was investigated. For the specimens having Ba contents between 0 and 20 at%, the average transition temperature was decreased linearly with increasing Ba contents and the degree of hysteresis was also decreased with increasing Ba contents. The maximum dielectric constants (K), electric field induced polarization(P) and electrically-induced strain(S) were found to exihibit a maximum value at∼3 at% of Ba. The increase of S and the decrease of hysteresis by minor additions of Ba impurities indicated the development of new higher perfomance actuator materials. The composition of Ba-PMN-PT (10/65/35) may be appropriate for capacitor materials because of low hysteresis and high polarization.

• Journal of the Korean Ceramic Society
• /
• v.37 no.1
• /
• pp.63-69
• /
• 2000

Electrically-induced strain(S) and polarization(P) for Pb(Sc1/2Nb1/2)O3-PbTiO3(1-x)PSN-xPT) crystalline solutions were studied. From the compositional dependence of S and P we could observe two maximum values at x=0.10 and x=0.425. It is considered that PSNT10(x=0.10) composition is the structural phase boundary to indicate the variable order-disorder[VOD] region. PSNT(x=0.425) composition is the morphotropic phase boundary[MPB] to indicate the rhombohedral to tetragonal phase transition. Higher S (0.437%) and P (0.3974$\mu$C/$\textrm{cm}^2$) values were attained by the La substitution (5 wt%) at Pb site in the MPB composition of 57.5PSN-42.5PT.

• Proceedings of the KIEE Conference
• /
• 2007.04b
• /
• pp.31-34
• /
• 2007

회복전압 측정법(RVM: Recovery voltage measurement)은 최근 유럽지역에서 활발히 연구 진행되고 있는 절연 진단 기법 중의 하나로 소개된바 있으며, 오일과 절연지 사이에 스며든 수분량을 검출할 수 있는 진단 시스템기법이다. 변압기 내부의 절연물질에 대한 분극특성을 분석함으로서 열화진행정도 및 열화정도를 진단하는데 활용될 수 있다. 본 논문은 국산화의 일환으로 전기계측제어용 LabVIEW 프로그램을 활용하여 RVM 전 과정을 자동으로 사용할 수 있도록 자체 제작한 프로그램을 소개하고자 한다.

• Electrical & Electronic Materials
• /
• v.6 no.3
• /
• pp.207-213
• /
• 1993

Pb(Z $r_{0.54}$, $Ti_{0.46}$) $O_{3}$에 B $i_{2}$ $O_{3}$를 0.0wt%까지 첨가하여 미세구조, 유전, 압전, 성질에 미치는 영향을 고찰하였다. B $i_{2}$ $O_{3}$의 고용범위는 약 0.5~0.7wt%정도 이었고 B $i_{2}$ $O_{3}$ 첨가량이 증가함에 따라서 결정립의 크기가 감소하였다. B $i_{2}$ $O_{3}$첨가량이 증가함에 따라 고용한계까지는 $d_{33}$ , tan .delta., .xi.$_{r}$(분극후)값이 증가하였으며 Qm값과 밀도는 감소하였다. $K_{p}$ 값은 B $i^{3+}$ 가 P $b^{2+}$를 치환하므로 형성되는 Pb공공의 형성에 의해 자발분극이 증가됨에 따라 증가하였다.다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.893-896
• /
• 2000

The SrBi$_2$Ta$_2$O$\sub$9/(SBT) thin films are deposited on Pt-coated electrode(Pt/TiO$_2$/SiO$_2$/Si) using RF sputtering method. The SBT thin films deposited on substrate at 400-500[$^{\circ}C$]. SBT thin film deposited on Pt-coated electrodes have the cubic perovskite structure and polycrystalline state. With increasing annealing temperature from 600[$^{\circ}C$] to 850[$^{\circ}C$], flourite Phase was crystalized to 650[$^{\circ}C$] and Bi-layered perovskite phase was crystalized above 700[$^{\circ}C$]. The maximum remanent polarization is 11.73 ${\mu}$C/cm$^2$at 500[$^{\circ}C$] of substrate temperature and 750[$^{\circ}C$] annealing temperature for 30min.