• Journal of the Korean Chemical Society
• /
• v.35 no.5
• /
• pp.512-519
• /
• 1991

The axial ligations of nitrogenous bases (pyridine, imidazole, 1-methylimidazole and 2,6-lutidine) to Zn(II)-, Cu(II)-, and Ni(II)-tetrakis(o-chlorophenyl)porphyrin(o-ClTPP), and -tetraphenylporphyrin (TPP) were investigated in organic solvents $(CH_2Cl_2,\;C_6H_6,\;CH_3NO_2,\;(CH_3)_2CO,\;CHCl_3,\;DMF\;and\;DMSO)$ and at 0.01M of ionic strength. The equilibrium constants for the ligation reactions of methalloporphyrins were determined using spectrophotometric method at 15∼35${\circ}C$. In case of M(II)-TPP the equilibrium constants K were considerably larger than those of M(II)-(o-Cl)TPP, depending on steric effect of the porphyrin. The linear relationships between logK of the axial ligation and $pK_a$ of nitrogenous base were shown in M(II)-TPP, but not in M(II)-(o-Cl)TPP. The stabilities of MTPP(L) were controlled by the reation enthalpy and entropy, while those of M(o-Cl)TPP almost by the reaction entropy. The coordinating power of solvent to the methalloporphyrin were also studied in $CHCl_3,\;(CH_3)_2CO$, DMF and DMSO. From those results the solvent effects on the equilibrium constants were discussed.

• Analytical Science and Technology
• /
• v.13 no.5
• /
• pp.608-615
• /
• 2000

A determination method of trace nickel and cobalt in water samples was studied and developed by adsorbing their complexes on ion exchange resin suspension. The analytical ions were formed as complexes with a ligand of APDC (ammonium pyrrolidinedithiocarbamate) and adsorbed on anion exchange resin of Dowex 2-X8. After the suspension was filtered out with membrane filter, the complexes were dissolved in HCl solution by an ultrasonic vibrator for ET-AAS determination. Several conditions were optimized as followings. pH of sample solution: 5.0, amount of ligand APDC: more than 430 times in mole ratio, the type and concentration of acid: 0.1 M HCl, and vibration time: 7 minutes. The addition of palladium in the HCl solution could improve the reproducibility and sensitivity by a matrix modification in the absorbance measurement. This procedure was applied for the analysis of three kinds of real water samples. The detection limits equivalent to 3 times standard deviation of blank were Co 0.36 ng/mL and Ni 0.27 ng/mL and recoveries in spiked samples were 99-102% for cobalt and 100-105% for nickel.

• Korean Journal of Food Science and Technology
• /
• v.30 no.1
• /
• pp.22-34
• /
• 1998

The purpose of this study is to develop biosensor for determination of glucose, lactate, and ethanol in foods and food-stuffs simultaneously. The multiple cathode system was prepared with an oxygen electrode having one anode and hexagonal cathode. Glucose oxidase, mutarotase, lactate oxidase, alcohol oxidase and catalase were used for immobilization to determine glucose, lactate, and ethanol. These components including ethanol were simultaneously determined by the immobilized enzymes in the multiple cathode system. The determination of the components by enzyme sensor was based on the maximum slope of oxygen consumption from enzyme reaction of each sensor part. The response time for analysis was 1 min. The optimum condition for glucose, lactate and ethanol sensor was found to be 0.1 M potassium phosphate buffer, pH 7.0 at $40^{\circ}C$. Interferences of various sugars and organic acids were investigated. Less than 10% of error was found in determination of the components except organic acids. This difference was compensated by the modified equation. This system was confirmed by conventional methods. It was concluded that the multiple cathode system of this study is for an effective method to determine sugar, organic acid, ethanol simultaneously in foods.

• Korean Journal of Food Science and Technology
• /
• v.35 no.1
• /
• pp.1-6
• /
• 2003

Chemical compositions of several herbs (rosemary, mint, thyme, sage, and lavender) cultivated in Korea were analyzed. Approximate compositions were as follows: moisture $69.92{\sim}82.10%$, crude ash $2.48{\sim}6.15%$, crude fat $0.40{\sim}2.46%$, crude protein $0.84{\sim}1.57%$, and crude fiber $2.48{\sim}6.15%$. Total contents of phenolics determined by Folin-Dennis's method were in the range of $73.24{\sim}197.79mg%$. Contents of minerals, Na, Ca, Mn, P, Mg, Zn, and Fe determined by ICP-AES were $43.0{\sim}112.5,\;177.5{\sim}304.0,\;0.5{\sim}1.5,\;74.0{\sim}218.5,\;57.0{\sim}116.0,\;1.0{\sim}2.0$ and $3.0{\sim}5.0mg%$, respectively. Free sugar contents determined by HPLC were: sucrose $0{\sim}7.61$, glucose $0.94{\sim}15.92$, and rhamnose $0.64{\sim}7.99mg%$. Fatty acids including palmitic, stearic, oleic, linoleic, linolenic, and arachidonic acids were identified by GC. Linoleic and linolenic acid contents were higher than those of palmitic and stearic acids. Aroma components identified by GC-MS were 1,8-cineole, ${\alpha}-phellandrene,\;{\alpha}-terpinene,\;{\beta}-pinene,\;{\beta}-thujone$, borneol, butan-1-ol, cis-sabinene hydrate, ${\delta}-carene,\;{\gamma}-terpinene$, and verbenone.

• Journal of the Korean Chemical Society
• /
• v.33 no.5
• /
• pp.484-495
• /
• 1989

Reactions of $(Et_4N)_2[MoOCl_5]$ with multidentate ligands containing nitrogen or/and oxygen donor atom (EDTA, DTPA, IDA, CyDTA, OX) produce a series of binuclear molybdate (V) complexes. The prepared Mo (V) complexes has been identified by Elemental Analysis, Infrared Spectra, Proton Magnetic Resonance Spectra, and Electronic Spectra. The electrochemical reduction mechanism has been studied by Cyclic voltammetry, Controlled Potential Coulometry, and Spectrophotometry in pH 3.571-10.375 acetate, borate, phosphate/sodium hydroxide, phosphate, ammonium/ammonia buffers. The cyclic voltammogram of the Mo-EDTA, DTPA, IDA, CyDTA complexes at pH < ca. 6.00 have shown two reduction waves. The first reduction wave shows two electron process and the second reduction wave shows two electron process. The cyclic voltammogram of the Mo-EDTA, DTPA, IDA, CyDTA complexes at pH < ca. 8.00 has shown one reduction wave. This reduction wave show four electron process. The cyclic voltammogram of the Mo-OX complex at pH < ca. 7.2 has shown one reduction wave. This reduction wave show four electron process.

• Journal of the Korean Chemical Society
• /
• v.25 no.6
• /
• pp.351-360
• /
• 1981

Ultraviolet spectrophotometric investigations have been carried out on the system of durene with iodine, bromine, iodine monochloride and iodine monobromide in carbon tetrachloride. The results reveal the formation of the charge transfer complexes of the type, $C_6H_2(CH_3)_4{\cdot}X_2$ or $C_6H_2(CH_3)_4{\cdot}IX$(X denotes halogen atoms). The equilibrium constant were obtained in consideration of that absorption maxima due to the formation of the charge transfer complexes shift to blue with the increasing temperatures. The thermodynamic parameters, ${\Delta}H,\;{\Delta}G\;and\;{\Delta}S$ for the formation of the charge transfer complexes were calculated from these values. These results indicate that the relative stabilities of the durene complexes at each temperature decrease in the order, $ICl>IBr>I_2>Br_2$. This order may be a measure of their relative acidities toward durene, which is explained in terms of the relative polarizabilities of halogen molecules and the relative electronegativities of halogen atoms. These results combined with previous study of this series indicated that the relative stabilities of the polymethylbenzene complexes with iodine increase in the order; Benzene

• Journal of the Korean Chemical Society
• /
• v.38 no.9
• /
• pp.667-675
• /
• 1994

The precipitate flotation using $La(OH)_3$ as a coprecipitant was studied for the simultaneous determination of trace three elements in a sea water. Several experimental conditions such as pH, coprecipitant and surfactant were investigated with an artificial sea water. To remove the influence of Cr(VI) the Cr(VI) was reduced to Cr(III) using $NaBH_4$ prior to the flotation. Trace amounts of Cu(II), Co(II) and total Cr in 1.0 l sea water was coprecipitated together with the precipitation of $La(OH)_3$ in the solution of pH 9.8 adjusted with 3.OM NaOH solution. The precipitate was floated by using a mixed surfactant (1 to 8 of each 0.5% ethanolic sodium oleate and sodium dodecylsulfate solution) by bubbling a nitrogen gas. The floats was separated and filtrated from the mother liquor by suction. The precipitate was dissolved in 7.0 M $HNO_3$ solution and then marked to 25.0 ml with a deionized water. These elements were determined by graphite fumace atomic absorption spectrophotometry. This method was applied to determine the elements in the sea water of the Eastern and Western coasts. And the recoveries were over 90.0% in the samples into which given amounts of the analyte elements were spiked.

• Journal of Life Science
• /
• v.25 no.7
• /
• pp.733-739
• /
• 2015

Microalgae are a renewable natural resource that requires only sunlight, carbon dioxide, phosphorus, and nitrogen for rapid growth. They produce a broad variety of basic chemical substances―such as vitamins, fatty acids and carotenoids―that have high added value potential for the pharmaceutical and food industries. The aim of this study was to develop axenic culture and to establish a cell growth assay for microalgae. A further experiment was carried out to determine the yield of astaxanthin derived from microalgae. The axenic culture was developed using a mixture of antibiotics [ampicillin (100 ${\mu}g/ml$), streptomycin (10 ${\mu}g/ml$), chloramphenicol (10 ${\mu}g/ml$), penicillin (10 ${\mu}g/ml$), neomycin (50 ${\mu}g/ml$), gentamycin (50 ${\mu}g/ml$), kanamycin (10 ${\mu}g/ml$), and nystatin (1.5 ${\mu}g/ml$)] and then used to extract a variety of useful components from the microalgae. The optimal concentration for the antibiotic mixture was 1-3 percent. A spectrophotometric cell growth assay was also established. Astaxanthin was extracted from Haematococus lacustris with a yield of $1.9{\times}10^{-3}{\mu}g/l$ per 1 ml of culture medium. In conclusion, the axenic culture method developed here allows extraction of high-quality astaxanthin and other useful components from microalgae.

• Journal of the Korean Chemical Society
• /
• v.25 no.2
• /
• pp.75-84
• /
• 1981

Ultraviolet spectrophotometric investigations have been carried out on the systems of mesitylene with iodine, bromine, iodine monochloride and iodine monobromide in carbon tetrachloride. The results reveal the formation of the charge transfer complexes of the type, $C_6H_3(CH_3)_3{\cdot}X_2$ or $C_6H_3(CH_3)_3{\cdot}IX$ (X denotes halogen atoms). The equilibrium constants were obtained in consideration of that absorption maxima due to the formation of the charge transfer complexes shift to blue with the increasing temperatures. Thermodynamic parameters, ${\Delta}H$, ${\Delta}G$ and ${\Delta}S$ for the formation of the charge transfer complexes were calculated from these values. These results indicate that the relative stabilities of the mesitylene complexes at each temperature decrease in the order, ICl > IBr > $I_2$ > $Br_2$. This order may be a measure of their relative acidities toward mesitylene, which is explaned in terms of the relative polarizabilities of halogen molecules and the relative electronegativities of halogen atoms. These results combined with previous study of this series indicated that the relative stabilities of the polymethylbenzene complexes with iodine increase in the order Benzene < Toluene < Xylene < Mesitylene Thus, analysis of these findings is discussed.

• Journal of the Korean Chemical Society
• /
• v.35 no.4
• /
• pp.389-396
• /
• 1991

The pre-concentration and determination of ultratrace arsenic in water samples was studied by the precipitate flotation technique. The arsenic in 1.0l of water sample, in which all suspended materials were filtered out, was coprecipitated together with La(OH)$_3$ precipitates at pH 8.5${\pm}$0.1. After the precipitate was made to be hydrophobic by adding mixed surfactant of 1 : 8 mole ratio of sodium oleate and sodium dodecyl sulfate, it was floated with the aid of tiny bubbles of nitrogen gas in a flotation cell. The floated precipitate was quantitatively collected on a micropore glass filter by the suction, dissolved with small volume of 1.0M sulfuric acid, and accurately diluted to 25.00ml with a de-ionized water. Total arsenic was spectrophotometrically determinated by forming silver diethyldithiocarbamate complex of arsine generated from arsenic in the concentrated solution. The calibration curve was linear up to 20ng/ml in the original solution. Analytical results showed that contents of arsenic in a campus wastewater and a river water were 8.2ng/ml and l.0ng/ml, respectively, and their recoveries were 93${\%}$ and 90${\%}$ in water samples which a given amount of arsenic was added into. From above result, it could be concluded that this method was applicable to the determination of arsenic in various kinds of water at low ng/ml levels.