• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.30 no.4
• /
• pp.329-334
• /
• 2017

The structures, which are made up with the huge number of degrees-of-freedom and the assembly of substructures, have a great complexity. In order to increase the computational efficiency, the analysis models have to be simplified. Many substructuring techniques have been developed to simplify large-scale engineering problems. The techniques are very powerful for solving nonlinear problems which require many iterative calculations. In this paper, a modal derivatives-based model order reduction method, which is able to capture the stretching-bending coupling behavior in geometrically nonlinear systems, is adopted and investigated for its performance evaluation. The quadratic terms in nonlinear beam theory, such as Green-Lagrange strains, can be explained by the modal derivatives. They can be obtained by taking the modal directional derivatives of eigenmodes and form the second order terms of modal reduction basis. The method proposed is then applied to a co-rotational finite element formulation that is well-suited for geometrically nonlinear problems. Numerical results reveal that the end-shortening effect is very important, in which a conventional modal reduction method does not work unless the full model is used. It is demonstrated that the modal derivative approach yields the best compromised result and is very promising for substructuring large-scale geometrically nonlinear problems.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.874-878
• /
• 2007

최근 들어 하구의 이용도가 높아져 감에 따라 용수 취수, 염해 방지공, 하도 계획, 수질 개선 등의 문제와 관련하여 하도 내로 침입하는 염수쐐기를 적절히 제어해야 될 필요성이 대두되고 있다. 이를 위해 염수쐐기의 형태와 거동특성을 정확하게 예측하고 내부유동 구조를 구명하는 것이 필요하다. 염수쐐기의 수리학적 특성에 관한 국내외 연구는 미흡한 실정이다. 국내에서는 하구에서의 유동장 해석을 위한 연구와 염수침입 현상과 반대로 담수 유출이 해양환경에 미치는 영향에 관한 해양공학적 연구가 주로 수행되었다. 국외에서는 1950년대 초반에 하구에서의 염도 혼합양상과 확산계수의 결정 및 수학적 모형에서 각 항들의 상대적 중요성 평가와 같은 기초적인 연구가 수행되었으며, 1970년대에 컴퓨터의 급속한 발전에 힘입어 다양한 수치적 기법이 개발되어 폭이 좁고 성층화된 하구에서의 수치계산이 수행되었다. 본 연구에서는 정상 염수쐐기의 형태 및 거동특성을 파악하기 위하여 수리실험을 수행하였다. 실험은 염수수조, 담수유입부, 수로부로 구성된 실험수로에서 수행되었으며, 염수와 담수간의 밀도차에 근거하여 실험 조건을 설정하였다. 실험을 통하여 밀도차와 담수유입량에 따라 염수쐐기의 형태 및 거동특성이 지배됨을 관찰할 수 있었다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.6
• /
• pp.1081-1086
• /
• 2023

The rapid growth and increasing complexity of modern networks have highlighted the limitations of traditional network architectures. The emergence of SDN (Software-Defined Network) in response to these challenges has changed the existing network environment. The SDN separates the control unit and the data unit, and adjusts the network operation using a centralized controller. However, this structure has also recently caused a huge amount of traffic due to the rapid spread of numerous Internet of Things (IoT) devices, which has not only slowed the transmission speed of the network but also made it difficult to ensure quality of service (QoS). Therefore, this paper proposes a method of load distribution by switching the IP and any server (processor) from the existing data processing scheduling technique, RR (Round-Robin), to mapping when a large amount of data flows in from a specific IP, that is, server overload and data loss.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.4B
• /
• pp.771-782
• /
• 2000

In this paper, an H.263 video codec is implemented by adopting the concept of hardware and software co-design. Each module of the codec is investigated to find which approach between hardware and software is better to achieve real-time processing speed as well as flexibility. The hardware portion includes motion-related engines, such as motion estimation and compensation, and a memory control part. The remaining portion of theH.263 video codec is implemented in software using a RISC processor. This paper also introduces efficient design methods for hardware and software modules. In hardware, an area-efficient architecture for the motion estimator of a multi-resolution block matching algorithm using multiple candidates and spatial correlation in motion vector fields (MRMCS), is suggested to reduce the chip size. Software optimization techniques are also explored by using the statistics of transformed coefficients and the minimum sum of absolute difference (SAD)obtained from the motion estimator.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.4A
• /
• pp.304-311
• /
• 2005

OCSP has specific characters which can suspend, close, and correct in real time. But, as more clients use the OCSP server verification, more updated information is needed, which can lead to jamming in the OCSP server. To apply this technique of Distributed OCSP server so as to reduce the certificate verification OCSP from jamming. Also, the Distributed OCSP server will solve the problems of the intensive central structure. Simulation results show that the average reply time of certificate verification request and server load are reduced in the case using distributed OCSP. In addition to this advantage, resource distribution and fault tolerance are acquired because of multiple OCSP.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.25 no.2
• /
• pp.95-102
• /
• 2005

There are many tube and pipeline in nuclear power plant under high temperature and high pressure. Erosion and corrosion defects were expected on these tube and pipe-line by environmental and mechanical factors. These erosion and corrosion defects ran be evaluated by ultrasonic technique. In these study, Scanning Laser Source(SLS) technique was applied to detect defect and construct image. This technique also makes detection possible on rough and curved surfaces such as tube and pipe-line by scanning. Conventional ultrasonic scanning technique requires immersion of specimen or water jet for transferring ultrasonic wave between transducer and specimen. However, this SLS technique does not need contacting and couplant to generate surface wave and to get flaw images. Therefore, this SLS technique has several advantages, for complicated production inspection, non-contact, remote from specimen, and high resolution. In this study, SLS images were obtained with various conditions of generation laser ultrasound and receiving in order to enhance detectability of flaws on the tube. Stress corrosion cracks were produced on tube and images of stress corrosion cracks were constructed by using SLS technique.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.8C
• /
• pp.1113-1124
• /
• 2004

In this paper, we proposed a hardware(H/W) structure which can compress and recontruct the input image in real time operation and implemented it into a FPGA platform using VHDL(VHSIC Hardware Description Language). All the image processing element to process both compression and reconstruction in a FPGA were considered each of them was mapped into H/W with the efficient structure for FPGA. We used the DWT(discrete wavelet transform) which transforms the data from spatial domain to the frequency domain, because use considered the motion JPEG2000 as the application. The implemented H/W is separated to both the data path part and the control part. The data path part consisted of the image processing blocks and the data processing blocks. The image processing blocks consisted of the DWT Kernel fur the filtering by DWT, Quantizer/Huffman Encoder, Inverse Adder/Buffer for adding the low frequency coefficient to the high frequency one in the inverse DWT operation, and Huffman Decoder. Also there existed the interface blocks for communicating with the external application environments and the timing blocks for buffering between the internal blocks The global operations of the designed H/W are the image compression and the reconstruction, and it is operated by the unit of a field synchronized with the A/D converter. The implemented H/W used the 69%(16980) LAB(Logic Array Block) and 9%(28352) ESB(Embedded System Block) in the APEX20KC EP20K600CB652-7 FPGA chip of ALTERA, and stably operated in the 70MHz clock frequency. So we verified the real time operation of 60 fields/sec(30 frames/sec).

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.311-313
• /
• 2014

전동기는 산업 전 분야에 걸쳐 다양하게 사용되는 회전기기로서, 소형화, 경량화, 고속화하는 추세에 있다. 이는 전동기 프레임의 구조강성을 약화시키고, 축계 위험속도를 낮춤으로써 진동에 취약한 구조를 가지게 된다. 회전체 진동 관련 규정 중 API 684 에서는 베어링 지지강성이 베어링 강성에 비해 3.5 배 이하인 경우 베어링 지지강성이 위험 속도 해석 모델에 포함되어야 함을 명시하고 있다. 산업 현장에서는 베어링 지지강성을 정확하게 산출하기 어려워 이를 고려하지 않고 회전체를 설계하는 경우가 많아 실제 조건에서 예측하지 못한 진동 문제가 발생할 가능성이 있다. 본 논문에서는 전동기 베어링 하우징 및 프레임에 대한 가진 시험을 통해 얻은 주파수 응답함수의 실수부를 분석하여 베어링 지지강성을 추출하는 방법을 제시하였다. 이를 바탕으로 유한요소 해석모델을 이용하여 베어링 지지강성을 해석적으로 예측하는 기법을 정립하였다. 추출된 베어링 지지강성을 축계 해석 모델에 포함하여 베어링 지지강성 포함 유무에 따른 축계 위험속도 및 안정성을 비교하였다. 그 결과 베어링 지지강성을 포함한 경우, 보다 정확한 위험속도 및 진동응답 수준을 예측할 수 있음을 확인하였다.

• Proceedings of the KIEE Conference
• /
• 2006.10a
• /
• pp.217-219
• /
• 2006

본 논문은 초고압용 XLPE 케이블의 절연/단도전의 계면특성 향상을 위해 계면활성제 부가를 통한 절연파괴전압 향상에 관한 것으로, 계면구조의 변화와 이에 따른 절연파괴전압의 상관성을 밝히고자 하였다. 이를 위해, 계면확성제의 함량에 따른 절연/반도전 계면에서의 결정 미세구조(라멜라 밀도와 분자배향)를 스침각 X-ray와 TEM분석을 통해 밝히고, 이를 절연파괴 특성과의 상관성을 밝혔다. 연구결과, 사용되는 기저고분자와 첨가제 간의 정합성과 최적의 첨가제 함량이 절연재료의 파괴강도에 큰 영향이 있음을 알 수 있었다. 즉, 과도한 첨가제의 부가로 인하여 계면으로 이동한 계면활성제 간에 인력으로 뭉치게 되고(aggregation), 결국 국부적인 도메인을 형성하여 절연파괴 개시부로 작용할 수 있게 된다. 이를 스침각 X-ray (Gl-SAXS)를 통하여 라멜라 밀도 및 배향을 정량화 할 수 있으며, 이는 XLPE 전력케이블의 반도전 재료의 처방 및 계면특성 정량화 기법으로 유효하게 사용될 수 있을 것이다.

• The Transactions of the Korea Information Processing Society
• /
• v.3 no.7
• /
• pp.1739-1752
• /
• 1996

Software reengineering involves improving the software maintenance process and improving existing systems by applying new technologies and software tools. Software reengineering can help us understand existing systems and discover software components that are common across systems. In the paper, we discuss the program analysis and environment to assist reengineering. Program analysis takesan existing program as input and generates information about structured part and object-oriented part. It is used to restructure the information by extracting code through reengineering methodology. These restructuring informations with object-oriented archilccture are mapping prolog form to query by using direct reation and summary relation.