• Journal of the Korean Institute of Telematics and Electronics
• /
• v.18 no.4
• /
• pp.49-61
• /
• 1981

A generally applicable computer simulation program for diffused silicon solar cells has been developed on the basis of the experimental results. The program can be easily used to obtain the spectral response and I-V characteristics for N+P, P+N N+PP+, P+NN+cells by changing various input parameters. The insolated spectra can be taken from AMI and constant intensity and GE - ELH lamp light sources. The options for AR coating are Si3N4 film and materials with constant reflectance including zero reflectance for ideal case. The computer simulation demonstrates successful results compared with the measured values for the short circuit current, open circuit voltage, efficiency, spectral response, quantum efficiency, I-V characteristics, etc. This program was used to optimize doping concentration, cell thickness, light concentration, junction depth, and to obtain the limit values for front surface recornbination velocity, effective carrier life time in the depletion regions and shunt resistance, and also to drive the changing rate in conversion efficiency depending on operation temperature, series resistance and electric field strength in N+P+ bulk regions.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.5 no.4
• /
• pp.318-328
• /
• 1993

A series of long wave measurements was made in the region of Shikotan Island (the South Kuril Islands) during 1990-1992: 7 bottom pressure stations were installed in 5 bays and inlets of Shikotan and 3 precise microbarographs were situated at the shore. The observations were taken in order to monitor tsunami waves, estimate resonance features of coastal topography, and investigate seiche generation mechanism. It was found that forced long waves dominate in the motions with periods exceeding 2 hours, freely propagating long waves prevail at periods of 30-120 min and eigen-oscillations of bays (seiches) are the predominant type of long waves at periods less than 30 min. The Helmholtz mode with period 30 min in Krabovaya Bay and 18.5 min in Malokurilskaya Bay is the most important type of wave motion in the inner Shikotan basins. There is a good correlation between passages of atmospheric disturbances and generation of seiches near the coast of Shikotan Island. In particular, jumps in atmospheric pressure excite seiches in different bays simultaneously, in each one with the corresponding dominant period. The atmospheric spectra were remarkably smooth and stable, and could be described by a $\omega$$^{-2}$26/ power law.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.18 no.4
• /
• pp.291-297
• /
• 2015

The wave spectrum was generated from wave data measured at the Chagwi-do site in Jeju, where a 10MW class floating wave-offshore wind hybrid power generation system will be installed. The latching control technology (Sheng et al.[2015]) was applied in order to improve the extracted power from WEC (Wave Energy Converter), which is heaving in corresponding irregular waves. The peak period as a representative value of irregular waves was used when we determined the latching duration. From the numerical results in the time-domain analysis, the latching control technology can significantly improve the extracted power about 50%.

• Journal of KIISE:Information Networking
• /
• v.28 no.4
• /
• pp.540-549
• /
• 2001

Internet telephony service is very cheap and very easy to introduce the value-added service than the POTS, but is difficult to the QoS of telephone service. The existing Internet typically offers 'best effort' services only, which do not make any commitment about delay, packet loss and jitter. This paper compensates the low quality of the speech for packet loss or delay using SOLA algorithm in Internet phone. SOLA algorithm is a popular technique for Time Scale Modification of speech and audio signal. In the proposed algorithm, the receiver expands the received packet under resonable threshold, and hence compensates the QoS of speech. From the simulation, this algorithm can conceals packet loss considerably, and is also improved the quality of the speech.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.8A
• /
• pp.671-678
• /
• 2005

This paper proposed symbol rate method which does not require a priori knowledge on the symbol rate and simplified modulation identification method to classify BPSK, QPSK, 8PSK signal. In order to estimate the unknown symbol rate, sliding FFT and simple moving average to estimate the spectrum of the signals is utilized, and sliding window and decimation, LPF blcok to estimate the proper symbol rate is used. Although conventional modulation ID method must use SNR value as the test statistics, the receiver cannot estimate the SNR value since the receiver cannot know the modulation type at the start of communication, and bit resolution is high due to using nonlinear function such as log, cosh. Therefore, we proposed the simplified fixed SNR value method. The performance of symbol rate estimation and modulation ID is shown using Monte Carlo computer simulation. This paper show that symbol rate estimation also has good performance in low SNR, and proposed simplified fixed SNR method has almost equivalent performance compared to conventional method.

• Journal of the Korean Wood Science and Technology
• /
• v.34 no.4
• /
• pp.76-82
• /
• 2006

The dried ground needles (2.0 kg) of Chamaecyparis pisifera (Sieb. et Zucc.) Endlicher were extracted with acetone-$H_2O$ (7:3, v/v), concentrated, and fractionated with a series of n-hexane, methylene chloride, ethyl acetate and water on a separation funnel. Each fraction was freeze dried, then a portion of ethyl acetate soluble powder was chromatographed on a Sephadex LH-20 column using a series of aqueous methanol and ethanol-n-hexane mixture as eluents. The isolated compounds were identified by cellulose TLC, $^1H$-, $^{13}C$-NMR, COSY, HETCOR, FAB and EI-MS. (+)-catechin, taxifolin-3-O-${\beta}$-D-xylopyrano-side, quercetin-3-O-${\alpha}$-L-rhamnopyranoside were isolated from the ethyl acetate soluble fraction of Chamaecypairs pisifera needle. Antioxidative tests on the isolated compounds indicated that all of the compounds showed similar values to ${\alpha}$-tocopherol and BHT as controls.

• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.2
• /
• pp.332-338
• /
• 2010

Annually, electrical fires caused by arcing phenomena in power system rapidly increase as the use of more electric appliances, but there is no established method for the prevention of the accidents. With this background, this paper dealt with the experimental results on a series arc detection technique and a device for air conditioners. Series arcing phenomena that is generated in incomplete connection of air conditioners was simulated, and the frequency spectrum was analyzed. The Fast Fourier Transform (FFT) of the arc pulse showed that the dominant frequency components exist in ranges of 190 kHz~250 kHz and 900 kHz~1.6 MHz. An arc detection circuit with low cut off frequency of 170 kHz to attenuate 60 Hz by 170 dB and a signal discriminator were designed. Also, an algorithm which separate series arc signal from unwanted noises produced by switching operation, inverter, and surge was proposed. Application experiment was carried out on several types of air-conditioners by using the arc generator specified in UL1699, and the results showed the over 99 % accuracy.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.22 no.2
• /
• pp.193-197
• /
• 2002

The frequency dependency of the Rayleigh surface wave was investigated indirectly by measuring the angular dependency of the backward radiation of the incident ultrasonic wave in the abrasion specimens, which was explained in view of the residual stress distribution. The peak intensity of the backward radiation profile decreased and the right half width of the profile increased with an increase of the variational rate of residual stress for the scuffing specimen. The peak intensity was also affected by the surface wave scattering during the propagation around the micro-damages. The peak angle might depend on not only the amount of residual stress but also the micro-structure. The result observed in this study demonstrates the high potential of the backward radiated ultrasound as a tool for the nondestructive evaluation of the subsurface gradients of materials.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.272-273
• /
• 2011

유기발광소자는 차세대 디스플레이 소자로서 빠른 응답 속도, 높은 색 재현성 및 매우 얇은 두께로 제작이 가능한 장점을 가지고 있어서 차세대 디스플레이 소자로서 많은 응용 가능성을 가지고 있다. 청색 유기발광소자는 적색 및 녹색의 유기발광소자의 발광 효율 특성보다 상대적으로 효율이 떨어지고, 색 순도가 낮으며 수명이 짧은 단점을 가지고 있어 소자 특성을 개선해야 한다. 본 논문에서는 청색 유기발광소자의 색 순도와 색 안정성 증진을 위하여 발광층을 2개의 층으로 나누어 15 nm 두께의 4,4'-Bis(2,2-diphenyl-ethen-1-yl)diphenyl (DPVBi) 형광 청색 호스트 물질에 4,4 '-Bis[4-(diphenylamino)stylyl]biphenyl (BDAVBi) 형광 청색 게스트 물질을 첨가하여 제 1 형광 발광층을 형성하고 15 nm 두께의 4,4'-Bis(carbazol-9-yl)biphenyl (CBP) 인광 호스트 물질에 bis(3,5-difluoro-2-(2-pyridyl)phenyl-(2-carboxypyridyl)iridium III (FIrpic) 인광 게스트 물질을 첨가한 제 2 인광 발광층으로 구성된 30 nm 두께의 하이브리드 발광층을 사용하여 청색 유기 발광소자를 제작하고 전기적 특성과 광학적 성질을 조사하였다. 하이브리드 발광층을 사용하여 제작된 유기발광소자는 20 mA/cm2의 전류 밀도에서 6.2 cd/A의 발광 효율을 나타내었고, 최대 밝기는 약 16,200 cd/m2로 측정 되었다. 하이브리드 발광층을 사용한 청색 유기발광소자는 전류의 흐름이 단일 발광층 유기발광소자에 비교하여 상대적으로 안정적인 전류 흐름을 가지며 발광층 내부에 더 많은 정공과 전자를 포획하여 엑시톤 형성 확률이 증가하여 발광효율과 밝기가 향상되었다. 하이브리드 발광층을 적용한 유기발광소자는 469 nm파장에서 형광 발광층의 주 전계발광 피크가 나타났고 그와 함께 인광 발광층의 부 전계발광 피크가 491 nm의 파장에서 관측되었다. 또한 전계발광 스펙트럼의 반치폭이 10 nm 감소하여 청색의 색 순도 증가에도 기여하였다. 하이브리드 발광층을 가진 청색 유기발광소자의 색 좌표는 전압 변화에 관계없이 일정한 값을 나타내었다. 이러한 결과는 형광과 인광 발광층으로 구성된 하이브리드 발광층 유기발광소자가 전기적으로 안정성을 가지며 발광 특성을 개선하고 안정적인 청색 유기 발광 디스플레이 소자로 사용 가능함을 나타내고 있다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.2
• /
• pp.9-17
• /
• 2002

A high-efficiency electronic ballast for HID lamps is presented. The ballast consists of a PFC and a resonant inverter. To reduce losses of the ballast, DC link voltage should be determined by taking into account the peak voltage of lamp and the maximum flux density should be kept 0.2[T] on all of inductors. AR inductor at bridge diode is employed in order to remove currant harmonics from PFC. An inductor is connected in series with an electrolytic capacitor at DC link to reject high-frequency current. The acoustic resonance is eliminated using the stead spectrum technique. The electronic ballast for 250[W] metal-halide discharge lamp is implemented and 96[%] efficiency, no acoustic resonance and low conducted EMI level are accomplished.