• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.272-276
• /
• 1996

This study deals with the speed control of an overcentered variable-displacement hydraulic motor on a constant pressure network, which is noted for its high system efficiency fast dynamic response and energy recovery capability. The speed control characteristics of the conventional cascade PI controller are largely affected by load-torque disturbances. To obtain robust speed control despite torque disturbances, the load torque is estimated by an observer based on a mathematical model and compensated for by a feedforward loop. It is shown by experiment that robust speed control may be obtained with the proposed controller. The experimental data agree fairly well with the theoretical analysis.

• Journal of Advanced Marine Engineering and Technology
• /
• v.21 no.2
• /
• pp.186-194
• /
• 1997

In this thesis, a new speed control algorithm based on the load torque observer theory is pro¬posed for the high performance speed control of a voltage source inverter to drive a 3 - phase induction motor. The proposed system becomes robust against disturbances using a feed -- for¬ward control of the load torque estimated at load torque observer. Computer simulation and experimental works using the proposed control confirm that transient response for the varia¬tion ofload torque becomes improved, compared with the conventional PI control method.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.1
• /
• pp.58-66
• /
• 2009

In this paper, vector control to applied disturbance offset feedforward loop control for changing disturbances with various mechanical parameter is suggested. The proposed system estimate load torque based on induction motor torque using minimum diemension state observer. Because speed controller using state observer is used on condition of feedforward loop fur a torque, the robust speed control system realized. In this study, the proposed paper does to heighten reliability of system by presuming and use the speed by voltage and current that is detected without speed sensor. To prove the propriety of this paper, the various simulation carried out adequacy using a Matlab Simulink, and at the same time real system is made, using a ADMC300 digital signal processor, so it is proved. As the experimental result of embodying the system, the robust system is realized.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.170-173
• /
• 2002

시스템이 슬라이딩모드의 존재조건을 만족하는 경우, 전동기의 상태가 전동기의 파라미터에 의존하지 않고 결정되는 절환 초평면에 수렴하기 때문에 파라미터에 불감한 응답을 나타낸다. 본 연구는 소형 유도전동기에 의한 외란 및 파라미터의 변동에 대하여 로바스트(robust)와 동시에 정확한 응답을 나타내는 교류서보 전동기 구동시스템을 실현하는 것이다. 이를 실현하기 위해서 가변구조 제어이론에 기초한 슬라이딩모드 제어를 적용하여 유도전동기 자계 슬립주파수형 벡터제어를 실현한다. 이상적인 전동기에 대한 시뮬레이션의 결과에 의해서 관성, 점성마찰계수, 부하 토오크 등 의 파라미터의 변동 및 외란에 대하여 로바스터성이 있다는 것을 알 수 있고 슬라이딩모드 제어의 도입이 교류전동기 서보제어에 유효한 것을 확인하였다.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.1024-1026
• /
• 2006

This paper designed a robust control of an induction motor using a disturbance cancellation observer of a feedforward control. The speed response of conventional PI controller characteristic is affected by variations of load torque disturbance. In the proposed system, the speed control characteristic using a feedforward control isn't affected by a load torque disturbance. High speed calculation and processing for vector control is carried out by ADMC300 digital signal processor. Validity of the proposed control method is verified through simulation and experimental result.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.6
• /
• pp.1346-1360
• /
• 1989

본 연구에서는 기준 모델 적응제어 방식에서 직접 적응제어 방식을 사용하여 부하의 변동 및 외란이 발생할 경우에도 매니퓰레이터의 정확한 궤적의 추종 및 속도 의 실시간 제어가 가능한 적응제어시스템을 설계하고자 한다. 제2절에서는 로봇 매니퓰레이터의 기구학적 이론 및 동적 모델링에 대한 기본이론을 전개하고, 제3절 에서는 제어시스템의 설계를 위한 제어 알고리즘과 초안정(hyperstability)이론을 통한 안정성 해석을 다룬다. 그리고 제4절에서는 제안된 제어기의 성능 평가를 위해 6관절 로봇인 스탠포드 로봇 매니퓰레이터에 대한 시뮬레이션을 통한 결과를 토오크 계산법(computed torque method)에 의한 결과와 비교 검토함으로서 제안된 제어기의 성능을 예증한다.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.5 no.4
• /
• pp.101-110
• /
• 1995

In this paper, a DC servo motor position control system based on acceleration control is proposed. The proposed control system consists of an acceleration controller and an auto-tuqing fuzzy PID controller. The auto-tuning fuzzy PID controller provides corrections for an acceleration reference to remove the effect of parametric uncertainties. And it comprises of the expert system which performs the automatic tuning of the PID controller parameters and the conventional PID controller. Expermental results demonstrate strate thi~tth e proposed overall control system has robust properties and good control performances with regard to unmeasurable disturbances and parameter variations. Therefore, the proposed control scheme enhances the applicability of an acceleration control approach and especially performs accurate position control under such an operating environment that model uncertainties exist and/or load, etc. change significantly.