• Journal of Advanced Marine Engineering and Technology
• /
• v.21 no.5
• /
• pp.503-511
• /
• 1997

In 3 phase induction motor control system, the speed control using the load torque observer becomes robust against disturbances by means of a feed-forward control of the estimated load torque component. In case of variation of inertia moment, the estimated load torque has error because the observer uses the nominal inertia to estimate the load torque. And so, it is difficult to obtain good speed control characteristics. This paper has two study target strategy. First, we executes feed-forward control with the load torque observer when motor inertia has nominal value and compare it with conventional PI con¬trol. The second strategy estimates inertia moment error using the load torque observer when inertia moment change. The proposed two strategy is confirmed through the computer simulations and the experimental implementations by TMS320C31 microprocessor.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.7 no.6
• /
• pp.72-81
• /
• 1999

A nonlinear engine torque and speed control algorithm using throttle angle control is developed with an engine load torque estimation algorithm. Three 3-dimensional nonlinear engine maps as a part of the nonlinear control algorithm are obtained from steady state engine dynamometer tests. An electric throttle actuator is developed using a stepper motor and a 8 bit micro-processor. The speed control and external load estimation algorithm are tested via engine speed control experiments, and show performance good enough for using various engine torque and speed control applications.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.6
• /
• pp.1346-1360
• /
• 1989

본 연구에서는 기준 모델 적응제어 방식에서 직접 적응제어 방식을 사용하여 부하의 변동 및 외란이 발생할 경우에도 매니퓰레이터의 정확한 궤적의 추종 및 속도 의 실시간 제어가 가능한 적응제어시스템을 설계하고자 한다. 제2절에서는 로봇 매니퓰레이터의 기구학적 이론 및 동적 모델링에 대한 기본이론을 전개하고, 제3절 에서는 제어시스템의 설계를 위한 제어 알고리즘과 초안정(hyperstability)이론을 통한 안정성 해석을 다룬다. 그리고 제4절에서는 제안된 제어기의 성능 평가를 위해 6관절 로봇인 스탠포드 로봇 매니퓰레이터에 대한 시뮬레이션을 통한 결과를 토오크 계산법(computed torque method)에 의한 결과와 비교 검토함으로서 제안된 제어기의 성능을 예증한다.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.170-173
• /
• 2002

시스템이 슬라이딩모드의 존재조건을 만족하는 경우, 전동기의 상태가 전동기의 파라미터에 의존하지 않고 결정되는 절환 초평면에 수렴하기 때문에 파라미터에 불감한 응답을 나타낸다. 본 연구는 소형 유도전동기에 의한 외란 및 파라미터의 변동에 대하여 로바스트(robust)와 동시에 정확한 응답을 나타내는 교류서보 전동기 구동시스템을 실현하는 것이다. 이를 실현하기 위해서 가변구조 제어이론에 기초한 슬라이딩모드 제어를 적용하여 유도전동기 자계 슬립주파수형 벡터제어를 실현한다. 이상적인 전동기에 대한 시뮬레이션의 결과에 의해서 관성, 점성마찰계수, 부하 토오크 등 의 파라미터의 변동 및 외란에 대하여 로바스터성이 있다는 것을 알 수 있고 슬라이딩모드 제어의 도입이 교류전동기 서보제어에 유효한 것을 확인하였다.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.11
• /
• pp.208-217
• /
• 1998

본 연구에서는 ER 브레이크와 ER클러치를 피드백작동기로 사용하여 이송테이블의 위치 추적제어를 수행하였다. 이를 위해 먼저 아라빅 검(arabic gum)계통의 ER유체를 자체조성한 후 전기장에 대한 빙햄(Bingham)모델을 실험적으로 도출하였다. 빙햄모델에 근거하여 평판형의 ER브레이크와 실린더형의 ER클러치를 설계 제작하였으며, 계단입력(step input)전기장에 따른 출력토오크특성을 통하여 이들 작동기의 동적모델을 얻었다. 이들 작동기와 연계된 이송테이블시스템의 운동지배방정식을 유도한 후 위치추적제어를 위한 슬라이딩모드제어기를 설계하였다. 제어기 설계시 이송해이블의 부하질량 변화에 대한 시스템 불확실성과 마찰력을 고려하여 제어성능의 강건성을 보장하도록 하였다. 제안된 제어시스템의 제어영역(control bandwidth)을 주파수 영역에서 고찰한 후 여러 레적에 대한 위치추적제어 실험을 수행하였다.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.6
• /
• pp.1039-1048
• /
• 2018

In urban tunnel construction, most of the Shield TBM method is applied to secure the safety of buildings and to minimize risks. On the other hand, in the urban development process, landfills are often embanked or improving in many cases, so that the boundary between the surface and the rock is often heterogeneous. In case of ground condition such as alluvial soil, granite, decomposed granite, core stone and rock with various layers, datas on shield TBM advancing according to each ground condition are analyzed, The characteristics of machine load were compared and analyzed. As a result, it can be predicted that the change of ground condition can be predicted by the tendency of discharge volume, thrust force and cutting wheel torque when the cutter is checked and replaced regularly on advancing under maintaining the design slurry pressure.

• 전기의세계
• /
• v.30 no.11
• /
• pp.734-746
• /
• 1981

This paper suggests on-load torque measurement for 3 phase induction motors by input -voltage and current utilizing symmetric coordinate analysis technique on the basis of the induction motor equivalent circuit. In this paper, two cases are treated with, i.e, one is the case where the motors' exciting current and primary leakage impedance voltage drop are compensated automatically, adopting the ideal wattmeter whose current coil impedance and voltage coil impedance are 0 and .inf. respectively, and the other is the case where non-ideal wattmeter is adopted and the compensation above is made by computation. As a result of the case study, following conclusions are obtained. 1) By proper combination of the error propagation law and the limit of power consumption, the desirable overall measurement error of the apparatus can be obtained on the basis of the inherent errors of CT and PT. 2) The measurement error is larger in current simulation circuit than in voltage simulation circuit. 3) Between the two cases, the latter is more advantageous than the former from the viewpoint of feasibility and the measurement error. 4) As the attachment of Ammeter in the current simulation circuit influences the measurement error considerably, its internal impedance should be large considerably. 5) The larger the consumption power of the apparatus is, the easier the feasibility is.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.5
• /
• pp.735-741
• /
• 1986

An experimental study on the effects of exhaust pipe curvature on the performance of a diesel engine is presented. The experiments were carried out on a 4-cycle, 216 c.c diesel engine and two types of pipe curvature, circular arc and rectangle, were tested. The shaft output, shaft torque and specific fuel consumption were obtained by inserting bent pipes of different dimensions into the exhaust pipe at various engine operation conditions. It was found that the engine performance was decreased by the circular arc bent pipe and the effects were dominated by its arc angle. The decrease of engine performance was minimized by the arc angle of 180.deg.. By the rectangle pipes the performance was more decreased and the effects were little influenced by its dimensions.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.2 no.2
• /
• pp.47-55
• /
• 1998

Steady-state and transient performance for the medium scale civil aircraft turbofan engine was analyzed. Steady-state performance was analyzed on maximum take-off condition, maximum climb condition, and cruise condition. At 90％RPM of the low pressure compressor, the partload performance was economized. The transient performance was analyzed with cases of the step increase, the ramp increase, the ramp decrease, and the step increase and ramp decrease for the input fuel flow. For the transient performance analysis, work matching between compressor and turbine was needed. Modified Euler method was used the integration of residual torque in work matching equation. At all flight condition, the overshoot of the high pressure turbine inlet temperature was appeared in the step and ramp increase case, and the surge of high pressure compressor was appeared in the step increase case and the ramp increase case within 5.5 seconds of maximum climb condition.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.5 no.4
• /
• pp.101-110
• /
• 1995

In this paper, a DC servo motor position control system based on acceleration control is proposed. The proposed control system consists of an acceleration controller and an auto-tuqing fuzzy PID controller. The auto-tuning fuzzy PID controller provides corrections for an acceleration reference to remove the effect of parametric uncertainties. And it comprises of the expert system which performs the automatic tuning of the PID controller parameters and the conventional PID controller. Expermental results demonstrate strate thi~tth e proposed overall control system has robust properties and good control performances with regard to unmeasurable disturbances and parameter variations. Therefore, the proposed control scheme enhances the applicability of an acceleration control approach and especially performs accurate position control under such an operating environment that model uncertainties exist and/or load, etc. change significantly.