• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.11
• /
• pp.1630-1637
• /
• 2002

A slab-wick heat pipe was fabricated and tested for applications where the condenser temperature is in a range of 80 to 12$0^{\circ}C$. The pipe material was 9.53 mm O.D. copper tube and the working fluids were ethanol and water. The total length of the heat pipe was 1.6 m, in which evaporator section was 1.4 m and the condenser was 0.10 m. The slab was a composite wick structure fabricated with STS316 wire screens. Thermal load was varied for a specified fill charge ratio and inclined angle. The optimum fill charge ratio was identified to be 110% based on a theoretical calculation of the pore space in the slab wick of the heat pipe. The maximum thermal load was 120W for ethanol and the same was 200W for water with the condenser temperature of 8$0^{\circ}C$. The thermal performance of the slab wick heat pipe is analysed in terms of temperature characteristics and thermal resistance against thermal load, tilt angle and fill charge ratio.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.7
• /
• pp.45-51
• /
• 2012

In this paper, the wireless power transfer system using the magnetic resonance was designed and the effect of resonant coil radius and load resistance to this system was analyzed by the circuit analysis method. As a result, the calculated transmitted-power is similar to measured one, and the coil size has a small effect to the coupling coefficients in the resonant frequency band. In addition, the fact that the calculated transmitted-power according to the source frequency is similar to measured one confirms that the circuit analysis methode in this paper is valid. The input side transmission efficiency ${\eta}_i$ including only the loss in the power transfer circuit is almost 90[%] with the large coil in the 10[cm] transfer distance, and 65[%] with the small coil in 1[cm]. The source side transmission efficiency ${\eta}_s$ is 30~40[%] at both coil when load resistance below 4.7[${\Omega}$] has been connected. Considering that the maximum ${\eta}_s$ is 50[%], this is valid in the practical applications.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.21 no.4
• /
• pp.570-578
• /
• 1997

At design stage of new motor or when taking remedial action of old motor, a lot of information can be obtained from thermal parameters analysis. This study focused on the temperature rise of TEFC induction motor with respect to various thermal parameters. Frame heat transfer had the most important effect on coil temperature rise. But those of air gap and rotor fan had no effect. This fact shows fan action is more important than fin action in the case of rotor fan. Coil temperature can be more decreased by cooling near the heat sources than any other parts from the results of thermal conductivity and loss tests. Variation of cooling air flow rate and motor volume effects on coil temperature were also tested. These tests suggest that improvement of cooling fan performance is important in reducing the coil temperature rise. Thermal equivalent program was verified by comparison of some experimental results.

• Proceedings of the KIEE Conference
• /
• 2002.11b
• /
• pp.329-334
• /
• 2002

우리나라 전력계통의 특성상 남부의 전원단과 수도권의 부하중심단과의 거리가 존재하여 안정적인 계통전압제어에 어려움이 존재한다. 이러한 계통전압제어의 어려움을 극복하기 위해 154kV 계통에 SC Bank를 설치 운용중에 있다. 운전 환경상 차단기의 투입과 차단이 잦은 154kV SC Bank에 리액터가 소손되는 등의 문제점이 발생하고 있어 154kV SC Bank의 써지응답특성을 규명하고 차단기의 투입차단시 발생하는 써지전류의 저감에 대한 연구의 필요성이 대두되고 있다. 본 연구에서는 154kV SC Bank를 대상으로하여 현장조사와 현장실증을 통해 써지전류를 측정하고, 모의를 통해 써지응답특성을 규명하였다. 그 결과, 차단기의 접점의 상태와 피뢰기의 동작여부에 의해 써지전류가 크게 영향을 받는다는 점을 확인하였다. 154kV SV Bank를 대상으로 한 현장시험과 서지응답특성의 분석결과를 기본으로 하여 피뢰기의 영향과 차단기의 투입차단 영향을 최소화하는 방안으로 피뢰기의 분리운전으로 전류재단현상을 막아 급준써지전류의 발생을 억제하고 저항투압방식의 차단기로 써지전류를 30%이하로 억제할 수 있음을 실증과 모의로 확인하였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.1900-1904
• /
• 2007

지금까지 수공구조물의 설계와 기존 시설의 안전도를 평가시 수문, 수리 및 경제학적 함수들에서 발생하는 불확실성을 설명하기 위하여 안전율 또는 여유고를 증가시키거나 이들 정보의 양과 질을 증가시켜 데이터베이스를 확장하고 측정오차를 최소화시키며, 전통적인 통계해석을 적용하였다. 공공의 안전을 확보하기 위하여 설계과정에 안전율 또는 여유고가 도입되었으나 이것은 단순히 보다 높은 재현기간의 적용을 의미하며, 수문현상이 가지는 추계학적 특성보다 확정론적인 근거로부터 안전설계 개념이 개발되었다. 수자원 계획시 고려되는 부하와 저항은 확정론적인 고정치가 아니라 시간에 따라 변하고 동적이며, 무작위적이므로 확률 변수로서 고려되어야 한다. 이에 따라 최근 수자원 계획과정에서 불확실성 해석에 의한 위험도 분석 개념이 도입되고 있으며, 특히 이상기후 및 집중호우의 빈발, 급격한 도시화로 인한 유출양상의 변화 등으로 급증하고 있는 훙수피해를 감안할 때 설계빈도의 상향조정과 같은 확정론적인 방법보다는 매개변수 또는 함수의 불확실성을 고려한 위험도 해석의 필요성이 더욱 증대되고 있는 실정이다. 따라서 본 논문에서는 수자원 계획시 입력자료 및 매개변수의 불확실성과 불확실성의 분리를 고려한 홍수량의 산정 및 각 매개변수의 영향을 평가하여 홍수위험도 해석에 있어서 모델 매개변수의 영향 규명과 처리방안을 제시하고자 한다.

• Journal of Korea Society of Industrial Information Systems
• /
• v.16 no.4
• /
• pp.1-7
• /
• 2011

In this paper, we design rectifing circuits at 910MHz, which is used for passive RFID system, for wireless power transmission system by using two types of schottkey diodes HSMS_2822 and HSMS 2852, and the RF-DC conversion efficiencies for the curcuits are compared and analyzed in terms of input power and load resistance. When the input power is -20 to 17dBm, the conversion efficiency for HSMS_2852 is larger than in case of HSMS_2822. The output voltage and current at the load of the fabricated rectifying circuit are measured through a dipole antenna when input power is transmitted by a RFID reader and the diatance varies. The measured ouput volatge and current for the distance of 50cm are 2.5V and 5.75mA.

• 유체기계공업학회:학술대회논문집
• /
• 2004.12a
• /
• pp.697-702
• /
• 2004

LG Electronics developed linear compressors for a household refrigerator which can reduce energy consumption up to $24\%$ by only Drop-ln instead of a conventional reciprocating compressor. The linear compressor is composed of a linear oscillating motor, a piston directly coupled with the linear motor, a cylinder and the specific discharge system of LG. Because of this free-piston structure, the position of the piston can be changeable according to the voltage variation, load variation and so on. By this reason, LG linear compressor has been in need of an additional unit to control the position of the free-piston stably. In this paper we will introduce the innovative technology which is able to operate the linear compressor without controlling the piston position like a conventional reciprocating compressor.

• Journal of the Korean Society for Railway
• /
• v.14 no.5
• /
• pp.411-415
• /
• 2011

DC/DC switching power converters are commonly used to generate a regulated DC output voltages with high efficiencies from different DC input sources. The voltage mode DC/DC converter utilizes MOSFET (metal-oxide semiconductor field effect transistor), inductor, and a PWM (pulse-width modulation) controller with oscillator, amplifier, and comparator, etc. to efficiently transfer energy from the input to the output at periodic intervals. The fundamental boost converter and a buck converter containing a switched-mode power supply are studied. In this paper, the electrical characteristics of DC/DC power converters are simulated by program of SPICE, and the PWM controller is implemented to check the operation. In addition, power efficiency is analyzed based on the specification of each component.

• Journal of the Korean Society for Railway
• /
• v.15 no.2
• /
• pp.116-121
• /
• 2012

DC/DC switching power converters produce DC output voltages from different DC input sources. The converter is used in regenerative braking of DC motors to return energy back in the supply, resulting in energy savings for the systems containing frequent stops. The DC/DC converter is composed of a PWM-IC (pulse width modulation integrated circuit) controller, a MOSFET (metal-oxide semi-conductor field-effect transistor), an inductor, capacitors, and resistors, etc. PWM is applied to control and regulate the total output voltage. In this paper, radiation shows the main influence on the changes in the electrical characteristics of comparator, operational amplifier, etc. in PWM-IC. In the PWM-IC operation, the missing pulses, the changes in pulse width, and the changes of the output waveform are studied by the simulation program with integrated circuit emphasis (SPICE) and compared with experiments.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.9
• /
• pp.1073-1078
• /
• 2012

This paper presented the extraction solution for the coupling coefficient at the magnetically coupled wireless power transmission(WPT) system through the analysis of its equivalent circuit considering the loss. The conventional extraction solution using coupled mode theory is generalized employing the extracted solution considering the load resistance. Consequently, the measuring process of extracting coupling coefficient becomes convenient since the even/odd mode analysis is not necessary. Furthermore, the coupling coefficient obtained from the induced extraction method was in excellent agreement with the coupling coefficient obtained using the ratio of magnetic flux passing through the two loops. The extraction of the accurate coupling coefficient at the magnetically coupled WPT is an essential work to analyze and optimize the WPT system.