• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.371-371
• /
• 2023

담양 및 화순 홍수조절지는 홍수 시 본류에 계획방류량만 흘러가도록 제수문을 운영하고, 계획방류량을 초과하는 홍수량은 하도 및 조절지 내에 저류하여 홍수를 지체시킨 후 저류된 홍수량은 첨두홍수가 지나간 이후 방류하는 방법으로 영산강 유역의 홍수를 방어하기 위해 '12년 건설되었다. 그러나 홍수조절지는 200년 빈도의 홍수량을 저감 시키도록 설계됨에 따라 준공 이후 10년간 '20년 8월 홍수 등 3회만 홍수방어용으로 활용되었다. 영산강은 오염부하량 대비 유출량 부족 등으로 수질관리에 취약하고 하천유지용수를 공급하는 다목적댐이 없는 등 수자원 확보가 어려우므로, 비홍수기 홍수조절지에 환경대응용수를 담수 및 방류하여 영산강의 유량확보 및 수질개선 등 활용 다변화 방안을 모색하고자 한다. 이와 관련하여 '16년 및 '19년에 시범담수를 실시하였으나, 담수 수질 관리의 어려움, 방류 전후 강우 등 제한적 여건으로 인해 하류 유량증가 및 수질 개선 효과의 확인은 어려웠으며, 제방 물비침 등을 발견하여 시설 안정성 확보가 필요한 것으로 확인되었다. '21년 안정성 확보를 위한 보강 그라우팅을 시행했으며, '19년부터 '21년 2월까지 「홍수조절지를 활용한 영산강 수질개선 방안」연구용역을 실시하여, 비홍수기 활용방안을 수립하였다. '21년 4/4분기 댐과 보 등의 연계운영협의회에 '시범담수 계획' 안건 상정 및 의결을 거쳤고, '22년 3월 25~26일까지 담양 74mm, 화순 61mm 비가 내려 담양 63만m³, 화순 151만m³를 담수하고 18~19일간 저류 후 담양은 평균 3.0m³/초로 25시간 동안, 화순은 평균 5.0m³/초로 32시간 동안 하류로 방류하였다. 방류 후 담양·화순 모두 가까운 하류 수위국 수위 상승을 확인했으며, 화순의 경우 하류 수질에 일부 영향이 있음을 확인하였다. 다만, 초기유출수 배제 등을 고려하지 않아 담수의 수질이 본류보다 좋지 않았으며, 이에 따라 수질 영향의 인과관계 확인이 어려웠다. 기존 연구용역에서 제시한 비홍수기 활용방안의 검증·보완을 위한 연구용역이 '22.5월부터 '23.12월까지 진행될 예정이며, 초기유출수 배제를 위한 조건 재수립, 수질 모니터링지점 확대 등 보완된 '시범담수 계획'을 '23.3월 댐과 보 등의 연계운영협의회에 보고하였다. 연말까지 연구용역과 연계한 시범담수·방류 시행 및 모니터링·효과분석을 통해 비홍수기 홍수조절지 최적운영방안을 마련할 계획이다.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.3 no.1
• /
• pp.20-29
• /
• 2001

This study was carried out to find out basic data of the various cropping systems controlling the soil environment by analysing the historical literature, the changes of cropping system and the expected income of cropping system of the upland crop. The results were summerized as follows ; 1. According to the literature of 'Gumyangjoprok' and 'Sanlimgyungjae', published on 15 to 16 century in Korea, the cropping system of barley, soybean, red bean, and millet, etc. was done together both the 'kunkyong' and 'kanjong'. 2. Since 1970s the staple food grains had been self-sufficient and the setting up of the rice seedbed became faster. However, the cropping system of the rice after barley was rapidly fallen from 83.7% to 4.0% in 1990s. Furthermore, the food production and the rate of arable land utilization were also rapidly fallen. 3. The most prospective cropping system is considered the soybean after barley, and root & tuber crops considering with the soil environment. 4. The expecting income of cropping system ranged from 940,000won to l,970,000won per 10a but that of barley after soybean cropping for 610,000won, and that of barley-after mung bean cropping for 613,000won. 5. The maintenance and the preservation of agricultural environment shall become positive by practicing the Integrated Nutrients Management(INM), and the Integrated Pest Management(IPM) with control using of fertilizer and pesticide presenting the excessive loads to the soil environment.

• Korean Chemical Engineering Research
• /
• v.61 no.1
• /
• pp.58-61
• /
• 2023

The activation process is essential for PEMFC to improve initial performance. The most commonly used activation method is a voltage change (load change) method, which may accompany degradation of the electrode catalyst if excessively performed. In many activation processes, the voltage change range is activated in a wide range from 0.4 V to OCV, and research is needed to reduce the voltage change range in order to prevent electrode catalyst degradation and shorten the activation time. Therefore, in this study, when the activation voltage range was 0.4~0.6 V, 0.4~0.8 V, and 0.4~OCV, we tried to research and develop an effective activation method by analyzing the performance and characteristics of the electrode and polymer membrane. The performance improvement was the lowest in the activation with a wide voltage range from 0.4 V to the highest OCV, and the performance decreased by 10% when activated for 56 cycles. The 0.4~0.6 V activation cycle showed the highest performance improvement up to 20% and the smallest decrease in performance due to overactivation, indicating that it is optimal method.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.18-18
• /
• 2020

금강하구와 같이 막힌 대형 하구는 근본적으로 복잡한 물리화학적 프로세스와 다양한 이해당사자간의 갈등 때문에 단편적인 접근으로는 관리의 한계가 있을 수밖에 없는 환경이다. 더욱이 하굿둑의 갑문을 열어 하구순환을 복원하는 해수유통 사업은 그 자체가 가지는 환경적 효용성의 확인과 기존 용수이용 체계의 전면적 변화와 관련된 상당한 비용이 요구된다는 면에서 특별한 논란이 되어왔다. 본 연구는 해수유통으로 인한 금강 하구해역의 수리, 수질, 퇴적 및 생태 등 다양한 환경적 변화를 집중적인 현장 조사 및 통합 모델링을 통해 정량적으로 예측하고 이를 지역 이해당사자 논의 체계인 금강하구해역정책협의회에 제공함으로써 해수유통과 연관된 이해당사자 간 갈등을 완화하고 과학적 자료에 근거한 정책결정을 지원하기 위해 수행되었다(과학-정책의 통합). 조사연구는 하굿둑 갑문 개방에 따른 다양한 시나리오별로 해수유통으로 인한 영향을 하구해역(하굿둑의 바다 쪽 해역)과 하구호(하굿둑의 하천 쪽 담수역)에 미치는 영향을 검토하였다(하천-하구호-연안해역의 공간적 통합). 시나리오는 하구해역정책협의회의 요구사항을 반영하여 개발되었고, 시나리오별 영향파악은 수리(조석 및 파랑 포함), 퇴적물 이동 및 수질은 Delft3D모델을, 유역으로부터의 유량 및 오염물질 부하량은 분포형 비점모델인 STREAM을, 김양식과 이매패류 생산량을 추정하는 생태모델은 통계기반의 포인트 모델을 통해 이루어졌다(수리-퇴적-수질-생태계 모델의 통합). 시나리오 분석결과, 상시 해수유통을 제외한 대부분의 하굿둑 부분 개방 시나리오에서는 하구해역에 미치는 영향이 제한적으로 나타나는 것으로 예측되었다. 이는 하굿둑 부분 개방에 따른 담수방류량 및 이에 대응하는 해수의 유동패턴이 현재와 크게 달라지지 않음을 반영한다. 반면 하구호에 대한 영향은 하구해역에 비해 하굿둑 갑문 운영시나리오에 따라 상대적으로 민감하게 변화되는 것으로 예측되었다. 갑문의 부분 개방을 통해 하구호의 수위를 현재 대비 5cm~50cm 변화시켰을 때 1psu 염분의 저층에서의 침투거리는 하굿둑 상류 6km~18km 정도로 예측되었고 갑문 개방에 의해 염분 침투 거리의 조절이 가능할 것으로 나타났다. 단, 사용된 통합모델은 수년간의 검보정 과정을 반복적으로 수행하여 예측의 정확도를 지속적으로 개선하였지만, 모델운영 자체의 불확실성을 고려할 때 실제 해수유통을 위해서는 시범개방을 통해 모델 예측의 결과를 확인할 필요가 있다.

• Smart Media Journal
• /
• v.12 no.10
• /
• pp.63-70
• /
• 2023

Recently, energy consumption for heating costs, which is 35% of smart farm energy costs, has increased, requiring energy consumption efficiency, and the importance of new and renewable energy is increasing due to concerns about the realization of electricity bills. Renewable energy belongs to hydropower, wind, and solar power, of which solar energy is a power generation technology that converts it into electrical energy, and this technology has less impact on the environment and is simple to maintain. In this study, based on the greenhouse heat storage tank and heat pump data, the factors that affect the heat storage tank are selected and a heat storage tank supply temperature prediction model is developed. It is predicted using Long Short-Term Memory (LSTM), which is effective for time series data analysis and prediction, and XGBoost model, which is superior to other ensemble learning techniques. By predicting the temperature of the heat pump heat storage tank, energy consumption may be optimized and system operation may be optimized. In addition, we intend to link it to the smart farm energy integrated operation system, such as reducing heating and cooling costs and improving the energy independence of farmers due to the use of solar power. By managing the supply of waste heat energy through the platform and deriving the maximum heating load and energy values required for crop growth by season and time, an optimal energy management plan is derived based on this.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.40 no.2
• /
• pp.64-71
• /
• 2024

Purpose: The purpose of this study is to evaluate Ti-base abutment's three different heights and three different cement types on the pull-off force of zirconia-based restorations. Materials and Methods: A total of 90 fixture lab analogs were embedded in auto polymerizing resin bloack. 90 Ti-base abutments heights of 3 mm, 5 mm, 7 mm were scanned and zirconia restoration were prepared from scanned files. Zirconia restoration were cemented with three different types of cements (temporary, semi-permanent, permanent) following manufacturer's instructions. All 90 specimens were placed and tested in a universal testing machine for pull-out testing. Retention was measured by recording the force at load drop. Statistical analysis was performed using Kruskal-Wallis test for detecting whether there are any statistical significance along cement types or abutment heights. After that, Mann-Whitney test was used for figuring out differences regarding abutment height and the comparison between 3 cements. Results: Temp bond showed significantly lower pull-off force compared to Fujicem regardless of any abutment height. However, there were significant differences between Cem-implant and Fujicem in abutment height of 3 mm and 7 mm, but there was no significant difference in 5 mm. Temp bond and Cem-implant had significant differences only in abutment height of 5 mm. Conclusion: Although Ti-base abutment height did not influenced zirconia restorations' retentiveness, cement types showed significant differences.

• Journal of Advanced Navigation Technology
• /
• v.28 no.3
• /
• pp.348-355
• /
• 2024

A current source capable of stably supplying current as a measurement medium is required in order to measure and test important facilities that require large-scale measurement current, such as a control element drive mechanism control system(CEDMCS), in case of dismantling a nuclear power plant. However, it can provides only voltage power as a source, not current, although direct voltage controlled constant current source is essential to test major equipment. That kind of source is not available to supply stable constant current regardless of load variation. It is just voltage supplier. Developing current source is not easy other than voltage source. Very large-scale current source up to ampere class more than such ten times of normal current is inevitable to test above mentioned equipment. So, we developed large-scale current source which is controlled by input DC voltage and supplies constant stable current to object equipment according to this requirement. We measured and tested nuclear power plant equipment using given real site data for a long time and afforded long period load test, and then proved its validity and verification. The developed invetion will be used future installed important equipment measuring and testing.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.14 no.2
• /
• pp.122-127
• /
• 2010

Purpose: The Xpress3.$cardiac^{TM}$ which is a kind of wide beam reconstruction (WBR) method developed by UltraSPECT (Haifa, Israel) enables the acquisition of at quarter time while maintaining image quality. The purpose of this study is to investigate the usefulness of WBR method for decreasing scan times and to compare to it with filtered back projection (FBP), which is the method routinely used. Materials and Methods: Phantom and clinical studies were performed. The anthropomorphic torso phantom was made on an equality with counts from patient's body. The Tl-201 concentrations in the compartments were 74 kBq (2 ${\mu}Ci$)/cc in myocardium, 11.1 kBq (0.3 ${\mu}Ci$)/cc in soft tissue, and 2.59 kBq (0.07 ${\mu}Ci$)/cc in lung. The non-gated Tl-201 myocardial perfusion SPECT data were acquired with the phantom. The former study was scanned for 50 seconds per frame with FBP method, and the latter study was acquired for 13 seconds per frame with WBR method. Using the Xeleris ver. 2.0551, full width at half maximum (FWHM) and average image contrast were compared. In clinical studies, we analyzed the 30 patients who were examined by Tl-201 gated myocardial perfusion SPECT in department of nuclear medicine at Asan Medical Center from January to April 2010. The patients were imaged at full time (50 second per frame) with FBP algorithm and again quarter-time (13 second per frame) with the WBR algorithm. Using the 4D MSPECT (4DM), Quantitative Perfusion SPECT (QPS), and Quantitative Gated SPECT (QGS) software, the summed stress score (SSS), summed rest score (SRS), summed difference score, end-diastolic volume (EDV), end-systolic volume (ESV) and ejection fraction (EF) were analyzed for their correlations and statistical comparison by paired t-test. Results: As a result of the phantom study, the WBR method improved FWHM more than about 30% compared with FBP method (WBR data 5.47 mm, FBP data 7.07 mm). And the WBR method's average image contrast was also higher than FBP method's. However, in result of quantitative indices, SSS, SDS, SRS, EDV, ESV, EF, there were statistically significant differences from WBR and FBP(p<0.01). In the correlation of SSS, SDS, SRS, there were significant differences for WBR and FBP (0.18, 0.34, 0.08). But EDV, ESV, EF showed good correlation with WBR and FBP (0.88, 0.89, 0.71). Conclusion: From phantom study results, we confirmed that the WBR method reduces an acquisition time while improving an image quality compared with FBP method. However, we should consider significant differences in quantitative indices. And it needs to take an evaluation test to apply clinical study to find a cause of differences out between phantom and clinical results.

• Journal of Chest Surgery
• /
• v.43 no.6
• /
• pp.627-634
• /
• 2010

Background: The durability of the tissue valve is important in choice between a mechanical valve and a tissue valve in cardiac surgery. We studied the mid-term results of tissue valve in the aortic position. Material and Method: The subjects were 380 patients who had undergone aortic prosthesis replacement between May 1990 and March 2009. We retrospectively analyzed hospital and outpatient records: the mean age was $69{\pm}9$ years; the male to female ratio was 227 : 162; and the mean follow-up duration was $46.7{\pm}40.8$ months (range 0~196 months). Result: 389 surgical cases in total had been taken with 380 patients. Early death occurred in 15 patients (3.9%). Overall survival rate at 1, 5 and 10 years were 92.3%, 78.1% and 54.2% respectively. Freedom from reoperation at 1, 5 and 10 years were 98.4%, 97.1% and 91.7% respectively. Freedom from structural valvular deterioration at 1, 5 and 10 years were 96.1%, 92.3% and 88.0% respectively. In the multivariate analysis of preoperative risk factors, young age (p<0.001) was significant risk factor for reoperation. High peak velocity in the postoperative period (p=0.034) and young age (p=0.029) were significant risk factors for structural valvular deterioration. Old age (p=0.001), long bypass time (p=0.035), concomitant coronary artery bypass graft surgery (p=0.003) and preoperative low left ventricular ejection fraction (p=0.003) were significant factors for early mortality. Preoperative estimated glomerular filtration rate (< 60 mL/min) (p=0.025) and persistent left ventricular hypertrophy (p=0.032) were the risk factors for late mortality. Conclusion: This study showed that the freedom from reoperation and the freedom from structural valvular deterioration in aortic tissue valve replacement were acceptable. It will be necessary to conduct further studies with long-term follow-up and more patients.

• The Korean Journal of Physiology
• /
• v.23 no.1
• /
• pp.79-87
• /
• 1989

Molecular property as well as biological activities of bombesin-like substance (BBS-LS) isolated from the skin of B. orientalis in Korea was compared with those of synthetic BBS-14. BBS-LS in the crude extract was applied on a Sephadex G-50, superfine column $(1.6{\times}112\;cm)$. On chromatogram, the first peak (3.5% of BBS-LS) was found ahead of synthetic GRP-27, and the second peak (rest) between synthetic GRP-27 and synthetic BBS-14. The main form of BBS-LS was successfully purified by using a column of alkaline alumina followed by sequential gel-filtrations on a column of Sephadex G-10, fine and a column of Sephadex G-50, superfine. Chromatographic analysis of the purified BBS-LS using a column of Sephadex G-50, superfine and reversed phase HPLC revealed that the main form of BBS-LS in the skin of B. orientalis could be distinctly different from either BBS-14 or GRP-27 in molecular size. The purified BBS-LS exerted biological activities quite identical to those of synthetic BBS-14. The results of the present investigation indicate that the skin of B. orientalis contains BBS-LS composed of two distinct forms. The main form of BBS-LS purified in the present study is heterogenous to both synthetic BBS-14 and GRP-27 in molecular size but identical to BBS in biological activities.