• Journal of the Korean Operations Research and Management Science Society
• /
• v.42 no.2
• /
• pp.49-61
• /
• 2017

The study on the efficiency analysis of Korean automobile parts companies is mostly based on the calculation of the size of output such as sales. However, the performance indicators such as sales, operating profit, and net profit are directly related to the cost structure, and this cost structure is affected by changes in the company's asset structure and capital structure. As a result, it is necessary that efficient capital procurement should be done at the same time to create efficient management performance through proper investment. In this study, we aim to measure the efficiency of asset and capital procurement compared to the sales figures, such as sales, generated by 33 primary suppliers who supply parts to Hyundai Kia Motors. For this purpose, this study proposed a DEA cross analysis model that can simultaneously measure efficiency in terms of input assets and capital procurement based on the same management performance when analyzing the efficiency of domestic auto parts companies.

• Journal of Intelligence and Information Systems
• /
• v.15 no.4
• /
• pp.37-51
• /
• 2009

One of the critical issues in the management of manufacturing companies is the efficient process of planning and operating service resources such as human, parts, and facilities, and it begins with the accurate service demand forecasting. In this research, service and sales data from the LCD monitor manufacturer is considered for an empirical study on Product Life Cycle (PLC) based service demand forecasting. The proposed PLC forecasting approach consists of four steps : understanding the basic statistics of data, clustering models using a self-organizing map, developing respective forecasting models for each segment, comparing the accuracy performance. Empirical experiments show that the PLC approach outperformed the traditional approaches in terms of root mean square error and mean absolute percentage error.

• Electronics and Telecommunications Trends
• /
• v.28 no.5
• /
• pp.111-121
• /
• 2013

인쇄전자(printed electronics) 기술은 인쇄가 가능한 기능성 전자 잉크 소재를 이용하여 초저가격의 프린팅 공정을 통해서 다양한 전자소자를 제작하는 기술로써, 차세대 ICT 기기의 제작에 적합한 전자제품을 생산하는데 적합한 공정기술로 잘 알려져 있다. 현재 인쇄전자의 기술수준은 일부 요소 부품들을 제작하고 간단한 전자회로를 구현하는 수준에 머무르고 있으나, 도체, 반도체, 절연체의 여러 잉크 소재 및 다양한 초미세 인쇄공정 기술의 개발이 진행됨에 따라 향후 폭넓은 분야에 적용될 것으로 기대된다. 이러한 인쇄전자의 관련 기술 중에서 최근 삼차원(3D) 프린팅 기술이 부상하고 있는데, 지난해 Economist에서는 3D 프린팅을 제3차 산업혁명을 가져올 기술 중 하나로 소개했으며, 세계경제포럼(WEF: World Economic Forum)에서는 2013년 10대 유망 기술 중 하나로 선정했다. 올해 초, 미국의 오바마 대통령은 국정연설에서 거의 모든 제품의 생산 방식을 바꿀 수 있는 잠재력을 가진 기술로 3D 프린팅을 언급했고, Optomec에서는 전자소자용 3D 프린팅 기술을 선보였다. 본 논문에서는 최근에 많이 연구되는 모바일용 무선통신소자나 차세대 디스플레이 백플레인용의 인쇄전자 기술과 상품의 모형인 목업(Mock-up)을 제작할때뿐 만 아니라 전자소자 제작에도 적용이 가능한 3D 프린팅 기술에 대하여 논하고자 한다.

• Journal of the Korea Society for Simulation
• /
• v.15 no.4
• /
• pp.59-67
• /
• 2006

An efficient PCB assembly method with Gantry type machine is developed and proposed in this paper to improve system productivity. Nozzle changes at Gantry type machine is the major reason causing lower system performance instead of header and slot movements on the other type machines. The problem is attacked by maximizing multiple adsorptions to reduce the number of necessary nozzle changes with Gantry type machine. It is designed to reduce the assembly time per PCB with multiple adsorptions based upon the positions of feeders and nozzles. A simulation model is constructed to show the effectiveness of the suggested heuristic and necessarily a comparison study is followed with different methods on selection of next assembly feeder and nozzle with various cases.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.8 no.4
• /
• pp.102-108
• /
• 2004

A layout of regenerative liquid rocket engine using turbo pump has been designed for development of high performance liquid rocket engine. each components of engine system was placed by considering assembly and characteristic. first stage engine system is controled by one plane of axis gimballing and composed of four engine assembly to cluster with launch vehicle. second stage engine system is controled by two plane of axis gimballing and composed of one engine assembly. assembly and disassembly Processes and required program have been developed. various shape of instruments were also developed for carrying out assembly and disassembly process efficiently.

• Journal of the Korea Safety Management & Science
• /
• v.16 no.2
• /
• pp.147-155
• /
• 2014

This paper suggests a specific model that could efficiently improve the interaction and the interface between WMS(Warehouse Management System) terminal and PDA terminal through real time processing in manufacturing shop. The proposed model shows that the new method can more efficiently perform to reduce processing time for shipping and receiving, compared with the current approach. As a result of the certain test among the main server, WMS system, and PDA terminal, it is noted in case of the new proposed system that the effects of proposed model are as follows: (a) While the receiving lead time for carrying by the current method was 2 hours, the receiving lead time by the new method was 20 minutes. (b) While the shipping lead time for carrying by the current method was 1 hours, the shipping lead time by the new method was 15 minutes. (c) While the inventory rate of accuracy by the current method was 85%, the inventory rate of accuracy by the new method was 98%.

• The Journal of the Acoustical Society of Korea
• /
• v.39 no.4
• /
• pp.331-341
• /
• 2020

At liftoff, launch vehicles are subject to harmful acoustic loads due to the intense acoustic waves generated by propulsion systems. Because these waves can cause electronic and mechanical components of launch vehicles and payloads to fail, predicting and mitigating acoustic loads is an important design issue. This article presents the latest information about the generation of acoustic waves and the acoustic design methods applicable to the launch pad. The development of the Japanese Epsilon solid launcher is given as an example of the new methodology for launch pad design. Computational fluid dynamics together with 1/42 scale model testing were performed for this development. Effectiveness of the launch pad design to reduce acoustic loads was confirmed by the post-flight analysis.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.1
• /
• pp.23-23
• /
• 2011

조선조 세종대는 천문과학기술의 전성기였다. 세종 자신도 천문학에 밝았던 데다 유교적 정치이념을 구현하기 위한 국책 사업의 성격이 강했기 때문에 조선조의 천문학은 세계적 수준으로 발돋움하였다. 이것은 고려시대부터 축적된 천문과학기술과 창조적 재능을 지닌 많은 과학기술자들이 있었기 때문에 가능했다. 1432년 세종이 천문의기 제작을 명한 지 6년만인 1438년에 각종 관측기기를 완비한 천문대인 간의대가 완성되었다. 당대로서는 세계 최대 규모로 인정받고 있는 거대한 종합 천문대인 간의대의 주변에는 혼천의, 혼상, 규표 등 다양한 천문 관측기기를 설치하였다. 규표로는 24기를 정밀하게 측정할 수 있었고, 각종 해시계로는 한양의 정확한 시간을 잴 수 있었다. 해와 별을 관측하여 낮과 밤의 시간을 측정하는 일성정시의와 천체 관측기기인 소간의 등 다양한 관측의기들이 독창적으로 창제되었다. 아쉽게도 세종대에 제작한 천문의기들 가운데 현존하는 유물은 한 점도 남아 있지 않다. 당시 천문유물은 사라져버렸지만 문헌을 통해 세종시대 각종 천문 관측의기의 복원 연구를 통해 설계와 복원을 수행하였다. 천문의기 복원(復元)은 모형(模型)을 만드는 것이 아니므로 자재와 공법들은 전통적인 방식으로 제작하여야 한다. 각 부품들이 계시기(計時器)로서 정확히 작동하도록 복원하려면 정교하게 제작하여야만 한다. 뿐만 아니라 천문의기들은 왕궁(王宮)에서 사용한 것으로 외형적으로 왕권을 상징하는 용(龍)의 형상과 화려한 문양으로 장식되어 있기 때문에 복원 과정에서 예술적인 면도 신중히 고려하여야 한다. 여기서는 지금까지 복원한 조선의 각종 천문의기의 구조와 기능 및 복원 과정의 주요 내용을 소개하고자 한다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.10a
• /
• pp.162-165
• /
• 2004

A layout of regenerative liquid rocket engine using turbo pump has been designed for development of high performance liquid rocket engine. each components of engine system was placed by considering assembly and characteristic. first stage engine system is controled by one plane of axis gimballing and composed of four engine assembly to cluster with launch vehicle. second stage engine system is controled by two plane of axis gimballing and composed of one engine assembly. assembly and disassembly processes and required program have been developed. various shape of instruments were also developed for carrying out assembly and disassembly process efficiently

• KIPS Transactions on Computer and Communication Systems
• /
• v.3 no.10
• /
• pp.383-392
• /
• 2014

The research for coatings is one of the most popular and active research in the polymer industry. For the coatings, electronics industry, medical and optical fields are growing more important. In particular, the trend is the increasing of the technical requirements for the performance and accuracy of the coatings by the development of automotive and electronic parts. In addition, the industry has a need of more intelligent and automated system in the industry is increasing by introduction of the IoT and big data analysis based on the environmental information and the context information. In this paper, we propose an optimization model for the design of experiments based coating formulation data objects using the Internet technologies and big data analytics. In this paper, the coating formulation was calculated based on the best data analysis is based on the experimental design, modify the operator with respect to the error caused based on the coating formulation used in the actual production site data and the corrected result data. Further optimization model to correct the reference value by leveraging big data analysis and Internet of things technology only existing coating formulation is applied as the reference data using a manufacturing environment and context information retrieval in color and quality, the most important factor in maintaining and was derived. Based on data obtained from an experiment and analysis is improving the accuracy of the combination data and making it possible to give a LOT shorter working hours per data. Also the data shortens the production time due to the reduction in the delivery time per treatment and It can contribute to cost reduction or the like defect rate reduced. Further, it is possible to obtain a standard data in the manufacturing process for the various models.