• Journal of Sericultural and Entomological Science
• /
• v.44 no.1
• /
• pp.37-41
• /
• 2002

The attaching treatment of sericin onto polyester fiber was attempted to improve its sanitary properties. Generally, sericin, a gummy material covering the outer layer of silk filament, is subjected to be removed during degumming process of silk textile process. For this study, sericin particle dissolved within the degumming waste water could be collected by sedimentation of polyaluminium chloride. It was revealed that sericin particle were attached onto the surface of polyester fiber evenly by treatment of glutaraldehyde, a crosslinking agent. A frictional static charge of the treated polyester fabric could be improved, while its hygroscopic property was little changed.

• Annual Conference on Human and Language Technology
• /
• 2019.10a
• /
• pp.246-251
• /
• 2019

품사 부착 말뭉치란 문장에 포함된 각 단어에 품사 표지를 부착한 말뭉치를 말한다. 이런 말뭉치에는 다양한 형태의 오류들이 포함되어 있으며, 오류가 포함된 말뭉치를 학습 자료로 사용하는 자연언어처리 시스템의 좋은 성능을 기대할 수 없다. 따라서 말뭉치의 일관성이나 정확도는 자연언어처리 시스템의 성능에 많은 영향을 준다. 하지만 말뭉치 구축 과정에서 작업자의 실수가 발생하고 여러 작업자가 작업을 수행하다 보니 일관성을 유지하기가 쉽지 않다. 본 논문에서는 이러한 문제를 해결하기 위해서 GMM을 이용한 군집화를 수행하여 오류 후보를 추출한다. 이를 통해서 말뭉치 구축 과정에서 작업자의 실수를 방지하고 일관성을 유지하고자 한다. 세종품사부착 말뭉치를 대상으로 임의로 오류를 유발시켜 실험한 결과, 재현율 84.74%의 성능으로 오류를 탐지하였다. 향후에 좀 더 높은 재현율을 위해서 자질 확장이나 회귀 분석 방법 등을 추진할 계획이다.

• Annual Conference on Human and Language Technology
• /
• 2000.10d
• /
• pp.116-123
• /
• 2000

한국어 구문 분석은 체언구 부착이나 부사구 부착의 문제를 가진다. 이런 부착의 문제는 많은 구문 모호성을 만들어 내어 올바른 의미를 가지는 파스 트리의 선택을 어렵게 한다. 한국어에서 이런 부착의 문제는 대부분 한국어 문장이 내포문을 포함하는 복문의 형태로 구성되어 있기 때문이다. 단문에서는 부착의 문제가 발생하지 않지만 복문에서는 체언구나 부사구가 어떤 용언에 부착하느냐에 따라 체언구 부착이나 부사구 부착의 문제가 발생한다. 따라서 용언이 가지는 정보를 이용하여 내포문의 범위를 결정해서 하나의 구문범주의 기능을 가지도록 분할한다. 이를 단문 분할이라 하며 문형이 가지는 필수격들을 최대로 부착하여 이루어진다. 단문분할을 하면 복문의 구조가 단문으로 바뀌므로 이런 부착의 문제가 자연스럽게 해결된다. 본 논문에서는 문형과 단문 분할을 이용하여 많은 구문 모호성을 해결할 수 있음을 제안한다.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.27 no.12
• /
• pp.1368-1373
• /
• 2003

본 연구에서는 견직물에 강경한 촉감을 부여하여 한복지 뿐만 아니라 현대의 패션경향에도 부합되는 소재를 개발하고자 하였다. 견직물에 강경성을 부여하기 위하여 의마가공용 폴리우레탄 수지를 이용하여 수지농도와 큐어링온도에 따른 수지부착율을 조사하였고, 여기에 수반되는 물리적 특성의 변화를 살펴보았다. 또한 가공된 견직물의 세탁에 대한 내구성도 살펴보아 동시에 실용가능성도 검토하였다. 이상의 연구를 통해 다음과 같은 결과를 얻었다. 1. 의마가공용 폴리우레탄 수지를 견직물에 처리할 경우 수지 농도가 증가할수록 수지 부착량이 증가하였다. 2. 열처리온도를 변화시켜 수지부착량의 변화를 살펴본 결과 열처리 온도가 증가할수록 수지의 부착량이 감소하여 본 실험에 사용된 수지의 적정 열처리 온도가 160-18$0^{\circ}C$인 것을 고려해 볼 때 견직물의 경우 17$0^{\circ}C$의 열처리 온도가 적절한 것으로 나타났다. 3. 수지 처리된 견직물의 역학적 특성치의 변화를 살펴본 결과 RT, EM, MIU값은 감소하는 경향을 가지며, LT, B, 2HB, G, 2HG, 2HG5값은 증가하는 경향을 나타내어 폴리우레탄 수지처리로 의마가공 효과를 갖는 견직물을 얻을 수 있었다. 4. 수지 처리된 견직물의 역학적 특성치는 물세탁 후에도 크게 변화가 없어 세탁에 대한 내구성을 지니고 있는 것으로 나타났다.

• KIPS Transactions on Software and Data Engineering
• /
• v.9 no.7
• /
• pp.221-228
• /
• 2020

Part-of-Speech (POS) tagged corpus is a collection of electronic text in which each word is annotated with a tag as the corresponding POS and is widely used for various training data for natural language processing. The training data generally assumes that there are no errors, but in reality they include various types of errors, which cause performance degradation of systems trained using the data. To alleviate this problem, we propose a novel method for detecting errors in the existing POS tagged corpus using the classifier of XGBoost and cross-validation as evaluation techniques. We first train a classifier of a POS tagger using the POS-tagged corpus with some errors and then detect errors from the POS-tagged corpus using cross-validation, but the classifier cannot detect errors because there is no training data for detecting POS tagged errors. We thus detect errors by comparing the outputs (probabilities of POS) of the classifier, adjusting hyperparameters. The hyperparameters is estimated by a small scale error-tagged corpus, in which text is sampled from a POS-tagged corpus and which is marked up POS errors by experts. In this paper, we use recall and precision as evaluation metrics which are widely used in information retrieval. We have shown that the proposed method is valid by comparing two distributions of the sample (the error-tagged corpus) and the population (the POS-tagged corpus) because all detected errors cannot be checked. In the near future, we will apply the proposed method to a dependency tree-tagged corpus and a semantic role tagged corpus.

• Journal of Plant Biotechnology
• /
• v.31 no.3
• /
• pp.209-217
• /
• 2004

The shoots of balloon flower (Platycodon grandiflorum A. DC.) in vitro germinated from seeds were cultured on MS basal medium containing 0.1 mg/L NAA under the various sucrose concentrations and with/without membrane filter (MF) on the lid of vessel. The growth responses were checked to obtain healthy plantlets. The $CO_2$ and $C_2$H$_4$ concentration in vessel without MF were higher than those with MF. The $CO_2$ concentration without MF was increased as days in culture went by whereas the $C_2$H$_4$ concentration was decreased. The plant growth with MF and high sucrose concentration was good. Fresh and dry weight of plantlets cultured in sucrose 4.5% with MF were higher than those in no sucrose without MF. Also the content of chlorophyll of plantlets cultured with MF was high and the content of sugar was shown a similar results and a remarkable difference between MF treatments, especially. Stomata cultured with MF was closer than that without MF and mesophyll of leaf were more developed with MF or in high sucrose concentration. When the plantlets were transplanted in the pot at 25$\pm$2$^{\circ}C$, 75% relative humidity and low PPFD (photosynthetic photon flux density), the percentage of survival after 13 days without MF was 0% but it was 100% with MF regardless of sucrose concentrations.

• Korean journal of applied entomology
• /
• v.8
• /
• pp.25-28
• /
• 1969

In order to find out the effect of contactor to form appressorial structure of Glomerella glycines, this experiment was carried out by using several contactors such as cover glass. cellophane, vinyl and oil paper respectively. In the case of cover glass placed on a drop of conidial suspension of the fungus which is incubated on water agar for 12 hours, 67.7 percent of appressoria were resulted, whereas no appressorial structure was found in the control. Vinyl was known best physical contactor and cellophane, cover glass and oil paper were fairly good in that order. Effects of temperature, time and relative humidity on the formation of appressoria of G. glycines were similar to each of optimum growth range of temperature and relative humidity $25^{\circ}-30^{\circ}C$ and 70-100 Percent, respectively. In addition, maximum appressorial formation was resulted in the conidial suspension incubated on soybean leaves for 36 hours. No appressorium was found at above $35^{\circ}C$, below R.H. 70 percent and 5 hours incubation.

• Journal of the Korea Institute of Building Construction
• /
• v.16 no.3
• /
• pp.237-245
• /
• 2016

Structural performance and durability of ultra high performance concrete could demonstrate optimal performance when unity was kept. Accordingly, it is necessary to involve the characteristics and quantitative surface treatment at the same time in order to retain oneness of Ultra-High-Performance Concrete(UHPC) according to construction joint occurrence. Therefore, this study derives a reasonable surface treatment method in a material's point of view through the shear adhesion performance evaluation according to the construction joints surface processing method as a part for securing the adhesion performance of the construction joints when casting UHPC. 180 MPa of required average strength was used for mix of UHPC and surface treatment method was set to totally 7 level that MN, GR-10-0, GR-20-0, GR-30-0, SH-30-5, SH-30-10. After the specimen were manufactured to a size of $150{\times}150{\times}150mm$, Direct shear test was performed to evaluate the shear adhesion strength. As a result, it was confirmed that the adhesion performance was improved when executing a surface treatment for the construction joint interface and standard of failure mode of specimen was over Type C. Also, It was considered that interface of cross section and depth of concavo-convex should be concerned.

• Korean Journal of Weed Science
• /
• v.18 no.4
• /
• pp.304-313
• /
• 1998

Foliar retention of pyribenzoxim (1% EC) was measured using the fluorescent dye rhodamine B, and related to efficacy and phytotoxicity to barnyardgarss (Echinochloa crusgalli) and rice (Oryza sativa cv. Chucheong), respectively. Effects of nozzle types (8002E flat-fan and disk-type), addition of adjuvant, variation of herbicide concentration or spray volume were compared. In barnyardgrass, foliar retention of pyribenzoxim at a recommended condition (application rate : 30g ai/ha, spray volume : 1000 L/ha) was 2.3 to 2.7 or 1.4 to $1.5{\mu}g$ ai/g fresh foliage when sprayed using the disk-type nozzle with or without adjuvant, respectively, and 0.6 to 0.7 or 0.3 to $0.5{\mu}g$ ai/g fresh foliage when sprayed using the flat-fan nozzle with or without adjuvant, respectively. The slope of increase in foliar retention was 1.0 to 1.8 when application rates increased from 10 to 60g ai/ha at 1000 L/ha, while that was 1.6 to 2.4 when spray volume increased from 330 to 2000 L/ha at $30{\mu}g$ ai/L concentration. Foliar retention of pyribenzoxim had a close relationship with herbicidal activity; regardless of spray conditions, retention to provide 90% control was about $0.8{\mu}g$ ai/g fresh foliage, and below this retention amount, efficacy decreased almost linearly. In rice, foliar retention at the recommended condition was 1.9 to 2.3 or 1.2 to $1.3{\mu}g$ ai/g fresh foliage when sprayed using the disk-type nozzle with or without adjuvant, respectively, and 0.6 to 0.9 or $0.3{\mu}g$ ai/g fresh foliage when sprayed using the flat-fan nozzle with or without adjuvant, respectively. The slope of increase in foliar retention was 1.0 to 2.8 when application rates increased from 30 to 120g ai/ha at 1000 L/ha, while that was 1.3 to 4.4 when spray volume increased from 1000 to 4000 L/ha at $30{\mu}g$ ai/L concentration. Despite the great difference in retention, rice phytotoxicity was not observed in any of these spray conditions, suggesting retention differences within 4-fold increase of application rate or spray volume do not affect rice safety. When pyribenzoxim 1EC was sprayed in tank-mix with several other commercial pesticide formulations, its retention to rice foliage tended to increase by 30 to 50%.

• Annual Conference on Human and Language Technology
• /
• 2009.10a
• /
• pp.186-190
• /
• 2009

품사 부착은 각종 자연어처리의 기본적인 요소이며, 크게 규칙 기반 방법과, 통계 기반 방법으로 나눌 수 있다. 대부분은 통계 기반의 기계학습을 이용하고 있으며, 대개 95% 이상의 성능을 보여주고 있다. 그러나 미등록어에 대해서는 성능이 그다지 높지 않다. 이 논문에서는 단어의 접사 정보를 이용해서 미등록어에 대한 품사 부착의 성능을 높이는 방법을 제안한다. 제안된 시스템은 CRF(Conditional Random Fields)를 이용하며, 그 자질의 일부로 접사 정보를 이용한다. 그 결과 미등록어에 대해서 약 40%의 성능이 개선되었다. 앞으로 미등록어에 적합한 자질을 연구하고 개발할 필요가 있을 것으로 생각된다.