• Proceedings of the Costume Culture Conference
• /
• 2003.09a
• /
• pp.102-103
• /
• 2003

의복 장식은 인류 역사와 함께 인간의 표현 욕구를 위한 매개체로서 의복을 보충해 주거나 독립적인 형태로 존재하면서 발전해 왔으며, 인간을 아름답게 하려는 목적으로 피부 및 의복에 부착되는 각종 소도구들로서 기능적인 면에 치중하거나 장식성을 추구하기 위해 사용된다. 현대 복식의 형태는 활동하기 편리하도록 단순화되고, 다목적에 사용되는 경향이 늘어나고 있으므로 의복 장식의 비중은 점차 확대되고 있다. (중략)

• Journal of the Korea Fashion and Costume Design Association
• /
• v.20 no.1
• /
• pp.29-47
• /
• 2018

This study aims at looking into women's costume style seen in 18th century to 19th century, and reason out a major decoration, then the formative and aesthetic characteristics of the decoration were analyzed. Research results are same as follows. Firstly, the style of women's costumes in the 18th and 19th century includes the Rococo style, Polonaise style, Neo-classic style, Romantic style and Bustle-style. The main decorations shown in these styles are the gather pleats drape of Fold decoration, the flat embroidery quilting of embroidery decoration, and the ribbon braid fringe button feather and fur of attachment decoration. Secondly, the analyzed results found the formative and aesthetic characteristics of the decoration in the 18th and 19th century women's costumes. Fold decorations appeared as a voluminous property in the form of gown mantua jacket pelisse and dress. Especially, femininity and exaggeration were expressed through greatly inflated skirts. Embroidery decoration appeared as planarity by making patterns of gown mantua jacket stomacher overskirt coat dress shawl and dolman. Especially, exaggeration and extravagance were expressed through embroidered mantua surfaces with peony rose poppy primrose daffodil morning glory tulip leaf and lattice patterns in variety of colored silk threads. Attachment decorations were mixed with elements of heterogeneity added to jackets, coats, gowns, petticoats, stomachers, mantuas, pelisses, mantles, dolmans, capes, overskirts and dresses. In particular, exaggeration and extravagance strongly expressed through the decoration with white fox fur at the hemline, neckline and sleeves of cream colored silk dolman.

• Conservation Science in Museum
• /
• v.18
• /
• pp.1-18
• /
• 2017

This study investigated the techniques applied in the manufacturing of the horse trappings with jewel beetle adornment excavated from Geumgwanchong Tomb, with a focus on the use of jewel beetle wings. It is revealed that the wings of jewel beetles were stripped of their upper skeletal parts and applied as ornamentation under the gilt-bronze openwork plate, and no additional process was applied to improve adhesion. The horse trappings from Geumgwanchong Tomb include saddles, stirrups, horse strap pendants, and bamboo mudguards, but most of the components except the stirrups are failing or lost, making it difficult to identify the manufacturing techniques. The techniques used to affix the jewel beetle wings vary depending on the support materials. Small chisels were used to fix the jewel beetle wings to the stirrups and saddle made of wooden supports. In the case of the bamboo mudguards and metal artifacts, the wings were fixed with lacquer and then combined with the gilt-bronze openwork plate using pressure.

• Korean Journal of Heritage: History & Science
• /
• v.53 no.2
• /
• pp.242-253
• /
• 2020

Six ornamental metal quiver fittings were excavated from stone chamber No.1 of the ancient tombs of Jeongchon, Bokam-ri, Naju. The ornamental quiver fittings are metal, but the body of the quiver was made of organic material, so that it corroded and disappeared in the burial environment. The ornamental metal quiver fittings were made in pairs, and decorated one quiver according to the location they were found in and their forms. The ornamental metal quiver fitting can be divided into two types: A band style ornament (帶輪狀金具) which decorates the arrow pouch, and a board style ornament (板狀金具) which decorates the board connecting the waist belt. Two ornamental metal quiver fittings excavated from wooden coffin 2 of stone chamber No.1, were made in the band style, while the ornamental metal quiver fittings from southeast of stone chamber No.1 were identified as two boardstyle ornaments and two band-style ornaments for what was presumed to be belt loops. Material analysis of the ornamental metal quiver fittings shows that they are made of a gilt bronze plate attached to an iron plate, and the surface is marked with a speck of chisel to make lines and patterns. Chemical composition analysis (XRF) established that 24~40wt% Au and 50~93wt% Cu were detected on the gold surface, and it was confirmed that bronze corrosion had taken place on the gilt surface. SEM-EDS analysis of the gold plating layer identified a working line for glossing, and 7~9wt% Hg and an amalgam of gilt layers was detected, confirming the amalgam gilding. CT and FT-IR analysis established that the band style was double-layered with silk fabric under the iron plate, and there was also a lacquer piece underneath. The band-style ornaments have two layers of silk under the iron plate, along with lacquer pieces. Adding the fabric to the arrow pouch increases adhesion and decorative value. It is assumed that the lacquer pieces indicate that the surface of the lacquered arrow pouch had fallen together with the ornaments. On the other hand, the board-style ornaments have a thick layer of organic matter under the iron plate, but this is difficult to identify and appears to be a remnant of the quiver board. The characteristics of these ornamental metal quiver fittings were similar in Baekje, Silla, and Gaya cultures from the late 4th to the late 5th centuries, and enable us to identify the art of ancient gold craftwork at that time.

• Journal of Conservation Science
• /
• v.38 no.2
• /
• pp.124-132
• /
• 2022

Through scientific analysis, this study identified the material characteristics of metal foil decorating the border line and knotting of the National Folklore Cultural Heritage 'Pouch for the Sutra Embroidered with a Sun and Moon Design'. Through Scanning Electron Microscope-Energy Dispersive Spectroscopy results, it was estimated that silver (Ag) and sulfur (S) were present in the metal foil, and silver leaf was also attached to the medium. S may discolor Ag from yellow to black depending on its concsentration and contact time. Yellow color could not be identified in metal foil at present. But there existed an example of the preparation of a gold-colored flat silver thread; therefore, further research is needed to estimate the original color. The lamella was reddish brown on the back. Aluminum, silicon, and iron were also detected and were the main components found in red soil. This is believed to be the red adhesive in traditional flat gold thread and is considered to be an adhesive-related component of the metal foil. From the gas chromatography mass spectrometry results, the adhesive component was confirmed to be animal glue.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.08a
• /
• pp.172-173
• /
• 2000

TiN 박막은 부착력이 좋은 기계적 성질을 갖고 있으며 화학적 안정성이 뛰어난 장점을 갖고 있어 수명이 긴 박막으로 사용 할 수 있다. 또한 반도체 집적 회로소자에서는 Al과 Si 사이의 확산 방지막으로 널리 사용하고 있으며, 티타늄과 질소의 화학 조성비를 적절히 조절하여 노란 금빛을 띠는 TiN 박막을 시계나 장신구 등의 표면에 코팅하여 장식에도 많이 사용하고 있다$^{[1]}$ . 최근에는 얇은 전도성 TiN 박막을 사용하여 무반사 영역을 넓히고, 무정전 효과를 지니며, TiN 박막의 두께를 변화시켜 투과율을 조절하여 명도대비(contrast)를 향상시킬 수 있는 2층 무반사 무정전 박막을 연구하고 있다.$^{[2]}$ 여기서는 티타늄과 질소의 원소조성비에 따른 TiN 박막의 복소수 굴절률의 분산이 단 2층으로 넓은 가시광선 영역에서 무반사 효과를 가질 수 있도록 TiN 박막을 증착해야 한다. (중략)

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.83.1-83.1
• /
• 2013

반도체 미세화, Glass 대면적화에 따른 산포관리 및 불량방지 필요(공정이격관리), 설비 데이터만으로는 Sensitivity가 낮아 공정 관리 어려움에 따른 대안 필요, 향후 추가 센서에 대한 접목이 용이한 SW Frame 필요, 양산적용을 위한 설비 및 FAB Host의 자동화 연계 개발 필요, 이종데이터의 통합를 통한 최적의 진단 및 관리가 필요합니다(SCM:툴박스). 즉, 기존의 장비 Parameter가 아닌 실제 공정시 Chamber로부터 얻을 수 있는 물리, 전기, 화학적인 데이터를 적합한 이종(異種) 센서를 직접 부착하여 이들 데이터를 통합 관리 분석 및 실시간 Monitoring을 통한 공정 진단 및 실시간 진단을 실행하는 솔루션입니다. 실 공정 시 적용이 유리한 OES 데이터를 주요 인자로 이외의 기타 데이터를 추가로 통합하여 특화된 분석환경과 공정 모니터링을 통하여 TAT (Turn Around Time)를 줄이고, MTBC (Mean Time Between Clean)를 늘림으로써 궁극적으로 칩메이커의 제품의 가격 경쟁력을 확보 할 수 있는 기능이며, 설비사 입장에서는 자사설비의 지능형 시스템을 위한 제반 기술이기도 합니다.

• Journal of Conservation Science
• /
• v.26 no.1
• /
• pp.13-24
• /
• 2010

This study examined each handiwork method of 4 filigree artifacts from Neungsan-ri temple site in Buyeo, Korea through material characteristic and microstructure analysis. As a result, it was indicated that all of the artifacts have comparatively higher purity than 22.7K and some of filigree artifacts showed that gold is alloyed with silver at a certain ratio. Gold thread that decorates surface showed thickness of 0.2~0.8mm and displayed various forms of section. Gold granule indicated that 2 or 3 granules are adhered together and they are 0.3~0.8mm in diameter. Trace of soldering was observed from gold thread and gold granule joints on surface and it confirmed a possibility of being soldering using gold solder through componential analysis. Also, it reveals a surface decorated with pigments such as cinnabar(HgS) and black.

• Conservation Science in Museum
• /
• v.3
• /
• pp.29-36
• /
• 2001

The hat excavated from the tomb of Hojeo-myon Wonsung-gun in Kangwon province was dry-cleaned and restored. The hat was made of wool felt and decorated with several strands of silk cord. It was very dirty and moth-eaten. After getting rid of the particle soils on a surface with painting brush, the hat was dry-cleaned using perchloroethylene applying the minimum force, and blotting paper was used for drying. During cleaning, it was supported by the stainless steel net. The weight loss was 7.94% after cleaning. The soils sticked on the hat was removed clearly. The texture of the hat became softer after cleaning. Color difference(∆E) was 2.57, which is a noticeable change. The color became clear and changed to the red and yellow range. After dry-cleaning, the hat was repaired. Dislocated silk cords were fixed to the right place by stitching with silk yarn. To keep the shape of the hat, it should be supported by a hat-shaped stiff net during exibition and storing.

• Fire Science and Engineering
• /
• v.29 no.1
• /
• pp.12-18
• /
• 2015

This study has conducted an experiment of comparing the flame resistant performance and combustion characteristics according to flame resistant treatment using the Cypress Luba and particle board that is commonly used for interior decoration and furniture. As a result of testing the flame resistant performance of Cypress Luba, the Cypress Luba injected with flame resistant resin using the vacuum pressure treatment has shown to have better performances (carbonized area 9.55% and carbonized length 22.91%) than the Cypress Luba treated with flame resistant coating having rubberized plastic components on its surface. For particle board, the specimen attached with fireproof film was identified to be better (carbonized area 40.10% and carbonized length 43.40%) than the specimen with non-fireproof film. For the results of combustion characteristics using the Cone Calorimeter, the specimen treated with flame resistant coating on the surface had faster ignition than the Cypress Luba injected with fire resistant resin using vacuum pressure treatment, and in the total release of calories, the Cypress Luba injected with fire resistant resin using vacuum pressure had $68.2MJ/m^2$, and the specimen treated with fire resistant coating on the surface had $111.52MJ/m^2$. For the particle board, the ignition time had a little difference but in the total release of calories, the specimen attached with fireproof film had $90.1MJ/m^2$ and the specimen with non-fireproof film had $107.6MJ/m^2$.