• The Korean Journal of Zoology
• /
• v.32 no.4
• /
• pp.412-419
• /
• 1989

Monoclonal antibodies (MAbs) reacting with the plasmalemma of Amoeba proteus were produced. Specificity of the 3 MAbs was determined by transfer blotting of the SDS polvacryfamide gel. AMS antibody reacted with the mucopolysaccharide bands of the spacer gel, 220 KD and 50 KD proteins of the resolving gel. The maior glycoprotein bands (175 KD, 165 KD) and 50 KD protein of the plasmalemma were recognized by AUG antibody. A third, AMP antibody reacted with the 50 KD protein only. In immunofluorescence microscopy of the enzyme treated cells, the antigens of these MAbs were sensitive to proteases, but not sensitive to neuraminidase. In the assay of cell to substratum attachment after binding with the antibody, AMG and AMP antibodies exerted no effect, but AMS hindered the attachment and cell spreading. Thus the effective components of the plasmalemma in cell to substratum attachment appear to be the mucopolysaccharides and 220 KD protein. The membranes of latex particle infested phagosomes did not show any distinction from the plasmalemma in fluorescence microscopy. Phagosome membranes of amoebae appear to be derived from the plasma membrane without selection in terms of the antigen composition. Amoeba Proteus의 세포막과 반응하는 단세포군 항체를 생산하였다. SDS polyacrylamide gel을 transfer blotting하여 이들 항체의 반응 특이성을 조사해 본 결과 AMS 단항체는 PAS로 염색되는 spacer gel의 mucopolysaccharide 린드, resolving gel의 220 KD 및 50 KD 단백질과 반응하였으며, 세포막의 주요 당단백질인 175 KD 및 165 KD 빈드와 50 KD 단백질은 AMG 단항체에 의해서 인지되었다. 그리고 AMP단항체는 공통인 50 KD 단백질과 특이하게 반응하였다. 효소처리한 아메바의 면역형광칠미경적 조사에서 이들 항체에 대한 항원분자들은 모두 단백질분해효소에 민감하였으며 neuraminidase에 대해서는 변화가 없었다. 이들 항체를 결합시킨 아메바의 용기표면 부착 가능성을 분석한 결과 AMP 및 AMG 단항체는 아무런 영향을 미치지 못하였으며 AMS 단항체는 세포의 용기표면 부착 및 세포의 펴짐을 저해하였다. 따라서 아메바의 용기표면 부착은 mucopolysaccharide 및 220 KD 단백질에 의해서 매게되는 것으로 나타났다. 그리고 latex particle을 담고 있는 식포막은 면역형광형미경적 조사에서 세포막과 차이가 없었다. 따라서 겐포막은 항원 조성에 있어서 비 선택적으로 세포막에서 유도되는 것으로 나타났다.

• Journal of the Korean Chemical Society
• /
• v.37 no.1
• /
• pp.154-161
• /
• 1993

Four kinds of new phosphinate derivatives with a pendant monoazacrown ether were synthesized and their biological activities were tested. These biologically active phosphinates were synthesized in relatively good yields (61∼72%) by one step reactions of phenylphosphinate with aldehyde and monoazacrown ether. Toxicity of these compounds was tested by intraperitoneal injection of the compounds to male mouse and revealed $LD_{50}$ value of 65∼90 mg/kg, which showed enhanced toxicity by attachment of a pendant azacrown ether to a simple phenylphosphinate structure. Although the ring size effect of the pendant crown ethers, (monoaza-15-crown-5 and monoazo-18-crown-6), beening negligible, the identity of the ester functional group in the phosphinate structure exerted sizable influence on toxicity. Thus, phosphinate derivative with octyl or propyl ester group showed somewhat higher toxicity than that with ethyl ester group.

• Journal of Radiation Protection and Research
• /
• v.20 no.2
• /
• pp.79-83
• /
• 1995

A number of investigators have reported formation of radiolytic ultrafine particles produced by the interaction of ionizing radiation with atmospheric trace gases. Previous studies have suggested that a very high localized concentration of the hydroxyl radical produced by the radiolysis of water can react with atmospheric trace gases such as $SO_2$ and produce lower vapor pressure compounds that can subsequently nucleate. To determine the trace gas and water vapor concentration dependence of the active, positively charged, first decayt product of radon (Po-218), a well-controlled radon chamber was used in this research. The mobility spectrum of the decay products in the range of $0.07-5.0cm^2/V\;sec$ from the radon chamber was measured using alpha track detector installed inside a specially-designed electrostatic spectrometer. Measurements were taken for different concentrations (0.5ppm to 5ppm) of $SO_2$ in Purified, Compressed air. A kinetics Study following the clustering of $SO_2$ around the $PoO_x^+$ ion in an excess of $SO_2$ for interpretation of the reaction processes was performed.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1584-1585
• /
• 2011

분자의 전리(ionization)작용과 이온의 해리(dissociation)작용에 의한 유전체 내 방전해석을 위해서 전자, 양이온, 음이온의 생성과 소멸, 전자부착, 재결합 과정을 포함한 전하연속방정식, 전계에 의한 푸아송 방정식, 유전체 온도에 관한 열확산 방정식을 결합하여 해석하였다. 전계 방출 조건과 열전자 방출 조건이 경계조건으로 부여되었고 에너지 최소화 정류조건을 따르는 유한요소법(finite element method)을 이용하여 해석하였다. 비교적 작은 값을 가지는 확산성을 무시하고 대류성에 역점을 두어 발생하는 수치적 불안정은 인공확산항(artificial diffusion technique)을 도입하여 안정화하였다. 본 논문에서는 IEC standard 60897의 표준규격에 따른 2차원 축대칭 침-구 전극에 적용하여 제안된 다중물리해석기법의 타당성을 입증하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.04b
• /
• pp.103-105
• /
• 2009

본 연구에서 우리는 single walled carbon nanotube(SWNT) 용액 속의 TEOS와 VTMS 바인더가 나노튜브 센서의 감도의 증가와 선택성을 가지는 것에 대해서 조사하였다. 일반적으로 혼합된 SWNT 용액 속의 유기 화합물인 바인더는 기판에 잘 부착된다. 그리고 가수분해 된 바인더의 표면에는 바인더가 경화 되었을 때 기능화 된 하나의 그룹이 형성된다. 그것은 SWNT의 표면에 가수분해 된 TEOS와 VTMS의 -OH와 $-CH=CH_2$ 같이 기능화된 그룹이다. 그러므로 전하는 carbon nanotube와 흡착된 분자 사이에서 이동되고 그에 대한 영향으로 전기적인 전도성이 변화한다. 이 실험에서 증가되어지는 알콜 농도에 따라 TEOS 바인더를 사용한 센서의 저항은 감소하는 반면 VTMS 바인더를 사용한 센서의 저항은 증가한다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.141.1-141.1
• /
• 2014

오일 증기의 제트를 분사하여 잔류가스를 배기하는 오일확산펌프는, 구조가 간단하여 고장이 적고 저렴하며 소음 및 전기노이즈가 적게 발생하는 많은 장점을 가지고 있다. 그러나 오일의 증기압에 의해 그 도달압력이 10-9 Torr 이상으로 제한되어, 액체질소로 냉각되는 배플형태의 저온 트랩을 사용하지 않는 한 10-10 Torr영역의 초고진공 배기용으로는 사용하지 못하는 것으로 알려져 있다. 유회전펌프로 뒷받침 배기(foreline pumping)하는 700l/s의 배기속도를 가진 오일확산펌프에 300 liter/sec의 컨덕턴스를 가진 액체질소 트랩을 부착하여 메탈 실링을 사용하는 초고진공 챔버를 배기하였다. 액체질소트랩에 액체질소를 투입하면 $1{\times}10-8Pa$이하의 초고진공이 얻어졌으나, 액체질소가 증발하여 트랩의 온도가 상온으로 상승하면 압력도 $1{\times}10-7Pa$ 이상으로 상승하였다. 50 liter/sec의 배기속도를 가진 터보분자펌프로 오일확산펌프를 뒷받침 배기하면 액체질소를 투입하지 않은 상태에서 $5{\times}10-9Pa$이하의 초고진공이 얻어졌으며, 액체질소를 투입하여도 압력은 거의 변화하지 않았다. 잔류가스분석장치로 얻은 잔류가스 성분 스펙트럼은 수소가 잔류가스의 대부분을 차지하는 것을 보여주었다.

• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1455-1456
• /
• 2006

반도체 에칭분야에 많이 이용되고 있는 $CF_4$, $C_{2}F_6$, $C_{3}F_8$가스들의 전자수송계수들을 볼츠만 방정식을 이용하여 해석하고자 한다. 특히 혼합가스를 이용하여 확산방전스위치에서 요구되어지는 특성을 파악하고자 할 때 시뮬레이션에 의한 적절한 혼합비 구현을 위하여 이들 순수가스들이 가지고 있는 전자충돌단면적을 해석하고, 전자이동속도와 부착계수 값을 2항과 다항근사 볼츠만 해석을 통해 $0.1{\sim}300$ Td에 걸친 광범위 표에서 해석하고자 한다.

• Journal of the Korea Concrete Institute
• /
• v.15 no.4
• /
• pp.549-556
• /
• 2003

Various researches on the application of polymer dispersions to the cement mortar and concrete have been practised in many countries like America, Japan and Germany and so on because of high performance and good modification effect of these. In this study, SBR, Polymer dispersion that widely used in situ is employed that the self-flowability may be induced in the cemen mortar. In order to comprehend and investigate the modification of cement mortar with self-flowability by SBR and properties and fracture mode of adhesive strength in tension of that, experimental parameter was set as SBR solid-Cement ratio(S/C) and Cement:Fine aggregate(C:F) and the experiments such as Unit weight, Flow, Consistency change, Crack resistance and Segregation that inform on the general properties have been done. In addition of that, Adhesion in tension is measured with a view to comprehending the properties and fracture mode in tensile load. Consistency change of cement mortar modified by SBR did grow better as the ratio of SBR solid-Cement increased and was much superior to that of resin based flooring such as polyurethane and epoxy which recorded the loss of consistency in 90min. after mixing. Adhesive strength in tension increased with continuity in the curing age and showed the maximum in case of C:F=1:1 and S/C=20%. As the increase of curing age, the fracture mainly happened in the concrete substrate and the interface between the specimen and concrete substrate.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.2
• /
• pp.144-150
• /
• 2013

Hybrid ceramic membrane (HCM) processes that combined ozonation with a ceramic membrane (CM) or a reactive ceramic membrane (RM), an iron oxide nanoparticles (IONs) incorporated-CM were investigated for membrane fouling control. Alumina disc type microfiltration and ultrafiltration membranes doped with IONs by sintering method were tested under varying mass fraction of IONs. Scanning electron microscope (SEM) images showed that IONs were well-doped on the CM surface and doped IONs were approximately 50 nm in size. Change in the pure water permeability of RM was negligible compared to that of CM. These results indicate that IONs incorporation onto CM had little effect on CM performance in terms of the flux. Natural organic matter (NOM) fouling and fouling recovery patterns during HCM processes confirmed that the RM-ozonation process enhanced the destruction of NOM and reduced the extent of fouling more than the CM-ozonation process by hydroxyl radical formation in the presence of IONs on RM. In addition, analyses of NOM in the feed water and the permeate showed that the efficiency of membrane fouling control results from the NOM degradation during HCM processes; leading to removal and transformation of relatively high contents of aromatic, high molecular weight and hydrophobic NOM fractions.

• Korean Journal of Food Science and Technology
• /
• v.28 no.1
• /
• pp.44-52
• /
• 1996

Sensory properties of cooked rice were affected by the varieties and growing environments of the rice. Moistness, cohesiveness, and adhesiveness of cooked rice were highly and positively correlated each other, whereas firmness was negatively correlated with these attributes. Sixty rice samples which differed in varieties and/or growing environments were divided into four groups based on their textural properties through principal component analysis and cluster analysis. Quality type I showed the highest values for moistness, cohesiveness, and adhesiveness, and the lowest values for firmness of cooked rice. On the other hand, quality type IV showed just the opposite values. There was no significant difference among rice starches in amylose content (P<0.05). A17 (type III) and A09 (type IV) had higher blue values for starch and amylopectin than the other samples (type I and II). On the amylogram, these samples showed lower values for breakdown and higher values for setback than the other samples. Average degree of polymerization, average chain length, and average number of chains for amylose and amylopectin were 597-878 and 2660-3140, 140-230 and 17-19, and 3.1-4.9 and 140-170, respectively.