• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.27 no.4
• /
• pp.191-195
• /
• 2017

The microstructures of nonwoven fabric with and without nanofibers used as a filter for air purification type mask were investigated using scanning electron microscope. Moreover, we proposed a new mask design which is effective in the improvement of the fine dust blocking property. When comparing to nonwoven fabrics of which an average diameter was $25{\mu}m$, the nanofibers formed by the electrospinning process had a tight mesh structure arranged irregularly with a relatively large specific surface area, which could be associated with their much smaller diameter ranging from 25 to 120 nm. Such a prominent structural feature at nanofibers led to mechanical adsorption of fine particles, resulting in enhancement of filtering behavior maintaining high permeability. In addition to the excellent performance of the mask filter, wearing the mask properly is expected to maximize the blocking property of fine dust. To meet such a requirement, a new mask design that can be closely attached to the face in order to effectively block fine dust entering the gap between the face and the mask.

• Journal of the Korean Geosynthetics Society
• /
• v.9 no.1
• /
• pp.21-30
• /
• 2010

To understand the deformation behavior of nonwoven geotextiles(NWGT) reinforced soil wall, analyses of load-elongation properties, soil-reinforcement interface friction, laboratory model tests, and field cases throughout literature reviews are being studied in this paper. According to the analyses results, the stiffness and tensile strength of NWGT is increased in proportion to confinement pressures, and the interface shear strength at soil-NWGT appeared to be stronger than soil-geogrid interface. The deformation at the beginning of loading on NWGT reinforced soil wall is larger than geogrid reinforced soil wall, but the wall deformation with NWGT is smaller than the wall of geogrid after passing some loading point in laboratory model tests. Case analysis results have shown that the facing of NWGT reinforced soil wall should be rigid enough to be used as a permanent wall, and NWGT and in-situ poor soil can be used for reinforcement and backfill respectively if the wall is constructed as pre-reinforced soil body and with post-facing that has a full-height rigid concrete.

• Proceedings of the Korean Fiber Society Conference
• /
• 1992.06b
• /
• pp.43-43
• /
• 1992

• Proceedings of the Korean Fiber Society Conference
• /
• 1992.06b
• /
• pp.44-44
• /
• 1992

• Applied Chemistry for Engineering
• /
• v.17 no.3
• /
• pp.267-273
• /
• 2006

We have prepared PP/Ba-ferrite composite fabrics by a melt-blown spinning method and investigated the relationship between the properties of PP/Ba-ferrite composite fabrics and melt-blown processing factors. A PP composite containing Ba-ferrite as a magnetic particulate filler was prepared in the form of pellet from PP resin and Ba-ferrite powder by melt compounding using a single extruder. Screw turning force (rpm), DCD (die-to-collector distance), and Ba-ferrite content were changed. We measured diameters of fiber, mechanical, thermal, and magnetic properties for the composited PP fabrics. The elongation was increased and a fiber diameter and tensile strength were decreased as the spinning distance increased or screw turning force decreased. The crystallinity was increased with increasing spinning distance according to XRD. It was assumed that the orientation of crystalline domain in the neat PP without ferrite was increased by drawing in mechanical direction, however, the orientation in the PP composite was decreased according to XRD analysis. We measured a magnetic property of PP nonwoven fabric containing Ba-ferrite powder. A coercive force, maximum magnetization, and residual magnetization are reduced with the spinning distance. According to the result of TGA measurement, the heat resistance was increased with the Ba-ferrite powder content and with decreasing the spinning distance.

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 1999.04a
• /
• pp.87-91
• /
• 1999

봄철 하우스 수박 무가온 조숙재배에 알맞는 보온방법을 개발하고자 아취형 단동하우스에 PE필름터널, 유공필름＋축열물주머니, 유공필름터널＋부직포터널구를 처리하고, 삼복꿀수박을 '98년 3월 23일 정식하여 4월 27일까지 36일간 터널피복재의 보온성을 검토한 결과는 다음과 같다. (1) 보온재 피복 재배 기간중 터널내 최저온도는 PE터널구 10.9$^{\circ}C$에 비하여 유공필름터널에 축열물주머니구와 부직포터널구는 각각 0.9, 2.1$^{\circ}C$ 높았다. (2) 3월하순 활착기의 하우스내 일사량은 실외 175.2w/$m^2$ 비하여 124.2w/$m^2$로 51w/$m^2$ 낮았다. (3) 터널피복재 환기작업에 따른 소요 노동력은 PE터널구 25.2시간/10a/36일에 비하여 유공필름터널＋부직포터널구는 32.4시간으로 7.2시간/10a/36일 증가하였으나, 유공필름터널＋축열물주머니는 개폐작업으로 인한 투하 노동력이 없었다. (4) 터널재배 기간중 유공필름터널＋부직포터널구가 초기생육이 촉진되었으며, 생육후기에 발생한 흰가루병 이병엽율은 2.8%로 현저히 감소하였다. (5) 수박의 수확기는 PE필름터널구 6월 22일에 비하여 유공필름터널＋축열물주머니와 부직포터널구는 6월 12, 15일로 7, 10일 앞당겼으며, 수량은 PE터널구 2,385kg/10a에 비하여 20, 32% 각각 증수하였다.

• Korean Journal of Crystallography
• /
• v.13 no.2
• /
• pp.69-72
• /
• 2002

The interlaminar problems near the free edge of composite laminates are analyzed in this paper. CFRP specimen (［+40/-40］s) and interleaved specimen (［+40//-40］s) with non-woven carbon tissue (NWCT) are discussed under tensile loading condition. The symbol “//”means that the NWCT is located between the CFRP interfaces. The NWCT has carbon short fibers which are discretely distributed with the in-plane random orientation. It was reported/sup 3)/ that the Mode Ⅱ interlaminar fracture toughness of CFRP laminates with NWCT is increased largely and the Mode I interlaminar fracture toughness is not changed significantly. Mode Ⅲ interlaminar fracture toughness is also an important factor in composite structures. But it is not easy to experimentally investigate the Mode Ⅲ interlaminar fracture toughness. The objective of this work is to study the effect of the NWCT and to fundamentally understand the Mode Ⅲ interlaminar shear characteristics of laminated composites with NWCT in the vicinity of a free edge by using finite element method analysis.

• Journal of the Korean Geosynthetics Society
• /
• v.3 no.1
• /
• pp.37-42
• /
• 2004

In the reinforced retaining wall system, non-woven geotextiles are placed at the face of reinforced earth until the facing blocks are built up. And when this system is used as temporary structure, geotextiles facings are exposed to sunlight during service lifetime. During these periods, degradation of nonwoven geotextiles are occurred by UV light. So the UV-resistance of nonwoven geotextiles must be assessed correctly, in considering of the site conditions. In this study, laboratory test and the field test have been performed to evaluate the UV resistance of non-woven geotextiles used in KOESWall system and the results are expressed in terms of tensile characteristics & SEM photographs.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.10b
• /
• pp.283-284
• /
• 2003

습식응고법에 의한 다공성 폴리우레탄-부직포 합성피혁은 일반적으로 DMF 또는 MEK 둥의 용제로 희석한 폴리우레탄 수지에 니들펀칭 부직포를 함침하여 기포를 준비한 후, 폴리우레탄으로 코팅하여 비용매인 물에서 응고하는 방법으로 제조한다. 따라서 합성피혁은 부직포의 물성, 함침조건, 코팅조건 및 응고조건에 따라 물성의 차이를 나타낼 것으로 판단된다[l]. 특히 합성피혁의 물성은 폴리우레탄 코팅층의 내부에 형성되는 셀(cell)의 크기, 분포 및 형태에 크게 의존한다. (중략)

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.10b
• /
• pp.285-286
• /
• 2003

폴리우레탄은 복합재료의 함침 및 코팅용으로 가장 보편적으로 사용되는 수지이다. 폴리우레탄-부직포 복합소재는 폴리에스테르 또는 나일론과 같은 합성섬유로 제조된 부직포에 폴리우레탄으로 함침한 후 다시 폴리우레탄으로 코팅함으로써 소재의 단위 무게 당 폴리우레탄이 차지하는 비율이 매우 높고, 최종제품의 물성에 많은 영향을 끼치므로 이와 관련한 연구는 주로 기능성 및 내구성을 부여하는데 맞춰지고 있다[1]. (중략)