• Proceedings of the Korean Society of Crop Science Conference
• /
• 2020.06a
• /
• pp.129-129
• /
• 2020

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2023.04a
• /
• pp.138-138
• /
• 2023

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2021.10a
• /
• pp.259-259
• /
• 2021

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2021.10a
• /
• pp.93-93
• /
• 2021

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2021.10a
• /
• pp.256-256
• /
• 2021

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2021.04a
• /
• pp.6-6
• /
• 2021

• Journal of the Korea Concrete Institute
• /
• v.18 no.4 s.94
• /
• pp.497-506
• /
• 2006

The precast concrete beam-column connectors for the high-rise office buildings were investigated experimentally in this study. The specimens of general precast beam-column connector which is used in a domestic site, specimen of DDC(dywidag ductile connectors) of Germany, and specimen of DDC with post-tensioning and modified DDC with post-tensioning were constructed and tested to verify the safety. The DDC with and without post-tensioning showed reliable joint strength and ductility but failed in critical inclined shear crackings at the column. The modified one showed better behaviors in tests because they did not show critical column crackings at failure. The use of prestressing did not helpful significantly to increase the strength and ductility of connectors but helpful only to develop self-centering behavior for stability.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.193-196
• /
• 2008

This paper proposes a method to predict the ductility capacity of reinforced concrete beam-column joints failing in shear after the formations of plastic hinges at both ends of the adjacent beams. The current design code divides joints into two categories: Type 1 for structures in non seismically hazard area and Type 2 in seismically hazard area. While there are many researches related to joint shear strength in Type 1, those in regard to joint ductility capacity of Type 2 are scarce. This paper classified the ductility capacity of beam-column joints into column, joint panel, and beam deformability. Since a brittle failure such as shear or bond failure in the columns must be avoided, column deformability was calculated by elastic analysis. The plastic hinges of the adjacent beams affect joint deformability. Therefore, the prediction of joint deformability was calculated with consideration to the degradation of the diagonally compressed concrete due to the strain penetration.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.5D
• /
• pp.627-638
• /
• 2008

At present, there is a no rational MOE for evaluating hazard level at curve sections. Therefore, this study focus on developing the MOE and algorithm for hazard level at curve sections. The scopes of this study limited to rural two-way roads. Actual data used is accident, geometric features, safety facilities of the selected sites at curve sections. In order to develop MOE for hazard level at curve sections, accident contributing factors were classified by road geometry, visual guidance facility, speed and driver factor. A relationship between the four factors mentioned and accidents was conducted. And, the MOE for hazard level at curve sections was derived from the previous relationship analysis, and the algorithm for hazard level was developed. Finally, worksheets were suggested based on the MOE and algorithm for road designers. These developed MOE and algorithm can be used to reduce serious accident contributing factors when designing roads and also, these will be used to determine an order of priority when reconstructing roads.

• Journal of Scientific & Technological Knowledge Infrastructure
• /
• s.10
• /
• pp.126-139
• /
• 2002

지난 2001년 12월에 과학기술부, 교육인적자원부, 농림부, 산업자원부, 보건복지부, 환경부, 해양수산부가 공동으로 발표한 생물공학육성 기본 계획을 요약하여 소개한다.