• 제목/요약/키워드: 부온도특성

검색결과 5건 처리시간 0.02초

몰리브덴이 첨가된 이산화바나듐으로 표면처리한 탄소계 전도성판의 전기저항특성 (Electrical Resistance of Mo-doped $VO_2$ Films Coated on Graphite Conductive Plates by a Sol-gel Method)

  • 최원규;정혜미;이종현;임세준;엄석기
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2008년도 추계학술대회B
    • /
    • pp.2007-2010
    • /
    • 2008
  • Vanadium pentoxide ($V_2O_5$) powder was prepared and mixed with Molybdenum Oxides ($MoM_3$) to form Mo-doped and -undoped $VO_2$ films by a sol-gel method on graphite conductive substrates. X-Ray diffraction (XRD) and scanning electron microscopy (SEM) was used to investigate the chemical compositions and microstructures of the Mo-doped and -undoped $VO_2$ films. The variation of electrical resistance was measured as a function of temperature and stoichiometric composition between vanadium and molybdenum. In this study, it was found that Mo-doped and -undoped $VO_2$ shows the typical negative temperature coefficient (NTC) behavior. As the amount of the molybdenum increases, the electrical resistance of Modoped $VO_2$ film gets reduced under the transition temperature and a linear decrease in the transition temperature is observed. From these experimental results, we can conclude that the electrical resistance behavior with temperature change of $VO_2$ films can be utilized as a self-heating source with the electrical current flowing through the graphite substrate.

  • PDF

세라믹 센서의 현상과 장래동향

  • 박춘배;송민종
    • E2M - 전기 전자와 첨단 소재
    • /
    • 제7권5호
    • /
    • pp.438-446
    • /
    • 1994
  • 인류는 지금 2차석기시대를 맞이하고 있으며 이 시대는 인공으로 만들어지는 돌인 세라믹이 단순히 용기나 도구로 사용되는 것 이외에 정보화사회에 있어서 기술의 관건이 될 지능소자로서 사용되고 있다. 세라믹은 내열성, 내식성, 내마모성이라는 특성으로 인해 많이 이용되어 왔지만 이러한 특성 이외에도 전자적 기능, 광학기능, 화학기능 등 "두뇌"도 우수한 재료라 할 수 있다. 더구나 세라믹은 인간을 대신하여 감지하는 것이 가능한 각종 센서로서도 폭넓게 이용되고 있다. 인간에 있어서 눈, 코, 귀, 혀, 피부 등 오감이 센서이며, 눈은 물체를 식별하는 것으로 빛을 검출하고 귀는 소리를 듣는 것으로 압력과 음파를 검출하고, 코는 냄새로 가스나 온도를 검출하고, 혀는 맛으로 미각을 검출하고, 피부는 촉각에 의한 압력, 온도, 습도를 검출하며, 인간의 오감에 대응되지 않는 것으로 세라믹 센서는 자기장을 감지할 수 있다. 이와같이 센서는 용도에 따라 수많은 센서가 개발되어 그 종류가 대단히 많기 때문에 모든 센서에 대해서 기술한다는 것은 어렵다. 그러므로 여기서는 센서중에서 기본적인 가스센서와 습도센서에 대해 소개하기로 한다. 소개하기로 한다.

  • PDF

$Bi_2O_3$를 첨가한 Mn-Ni-Co계 써미스타의 자동차 연료 부족 감지용 센서 특성 (Characteristics of Mn-Ni-Co system for automobile fuel shortage detecting sensor with $Bi_2O_3$ addition)

  • 윤중락;이헌용;김두용;오창섭
    • E2M - 전기 전자와 첨단 소재
    • /
    • 제9권5호
    • /
    • pp.455-462
    • /
    • 1996
  • Automobile Fuel Shortage Detecting Sensor, in this paper, was fabricated by using heat dissipation coefficient difference between gasoline and air condition the NTC thermistor of Mn-Ni Co system with the composition ratio of Mn$_{3}$O$_{4}$ : 9wt%, NiO : 28wt%, and CO$_{3}$O$_{4}$ : 61wt%. The condition of sensor operation is that, for turn-on characteristics, the time of arriving at 135mA must be less than 180 second when the DC voltage of 11V is applied in the air condition of -10.deg. C and that, for turn-off characteristics, the saturation current must be less than 60mA when the DC voltage of 15V is applied in the gasoline condition of 60.deg. C. It is known, from the experimental results, that the resistance range and B-constant for the Automobile Fuel Shortage Detecting Sensor with dimension of 5*3*0.9mm were 850-1150.ohm. and 1150-1250.deg. C, respectively and the resistance range and B-constant were agree with that of sensor operation condition. When Bi$_{2}$O$_{3}$ of 0-0.5wt% was added to Mn$_{3}$O$_{4}$ : 9wt%, NiO : 28wt%, and CO$_{3}$O$_{4}$ : 61wt% composition, the resistivity and B-value were 380-430(.ohm.-cm) and 1930 - 2030, respectively. Particularly, for Bi$_{3}$O$_{3}$ of 0.25-0.5wt%, the sintering density of over 90% and the operation characteristics necessary to Automobile Fuel Shortage Detecting Sensor were obtained. The difference of heat dissipation coefficient gasoline and air condition was 15 times.

  • PDF

복합전이금속(Ni, Co, Mn) 기반 스피넬계 산화물의 소결 거동 및 온도센서 특성 연구 (Sintering behavior and electrical properties of transition metal (Ni, Co, Mn) based spinel oxides for temperature sensor applications)

  • 소영희;이은서;이진영;민성욱;이빈;김형태
    • 한국결정성장학회지
    • /
    • 제34권2호
    • /
    • pp.73-77
    • /
    • 2024
  • 스피넬계 산화물 중 (Nix, Mny, Co3-x-y)O4(NMC)는 부온도계수 온도센서 소재로 활용되어 전기자동차용 배터리 관리 시스템을 포함한 다양한 산업적 응용이 가능하다. 일반적으로 NMC는 Ni, Mn, Co 화합물 분말을 이용하여 고상반응법을 통해 제조되는데 이 중 소결 공정을 통한 치밀화 과정이 온도센서 소재의 온도에 따른 전기적 특성을 결정하는 중요한 인자로 알려져 있다. 본 연구에서는 NMC 펠렛을 고상반응법을 통해 제조하고 결정구조 및 미세구조를 관찰하였다. 또한, 소결 과정 동안의 치밀화 거동 분석을 위한 활성화 에너지를 도출하였다. 분석 결과에 따르면, NMC 펠렛의 상온 저항은 10.03 Kohm이었으며 센서민 감도인 B-value는 3601.8 K로 다양한 산업군에 온도센서로 적용이 가능할 것으로 기대된다. 또한, 치밀화를 위한 활성화 에너지는 273.3 ± 0.4kJ/mol로 도출되었으며, 이는 소결 과정의 열역학적 특성을 이해하는데 중요한 정보를 제공할 것으로 기대된다.