• Journal of the Korean Institute of Gas
• /
• v.14 no.4
• /
• pp.37-44
• /
• 2010

To propose a cause analysis method of pressurized facilities, a likelihood of failure (LOF) for the thinning module by hydrochloric acid corrosion was analyzed through the risk-based inspection (RBI) using API-581 BRD. For this investigation, the technical module subfactor (TMSF), as a main factor of the LOF, was estimated, and the effects of parameters on the TMSF were analyzed quantitatively. As a result, we found that the TMSF increased with increasing chloride ion concentration and temperature, but it decreased with increasing thickness of the facilities, inspection number and inspection effectiveness. Also, the TMSF showed a relatively low value for the monitoring system implemented and the overdesign factor>1.5. In this condition, the TMSF changed sensitively with the inspection number, the inspection effectiveness and the overdesign factor, and its magnitude varied with the monitoring system.

• Corrosion Science and Technology
• /
• v.13 no.5
• /
• pp.186-194
• /
• 2014

Establishment of adhesion strength measurement procedure for marine epoxy coatings was conducted in order to ensure reliability of the test results. It was found that (1) the increase in thickness of the substrates would induce increase of pull-off strength. Especially, the increase in adhesion strength with the substrate thickness increment was attributed to the transition of stress mode to the pure tensile mode excluding bending effect. (2) The longer curing time, the higher pull-off strength. It may be due to higher cross-linking density of the coating (3) The pull-off strength increases as coating thickness increases due to the diminishment of bending effect (4) The longer drying time after water immersion, the higher pull-off strength. It may be due to the evaporation of water molecule at the coating-substrate interface.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.1391-1394
• /
• 2006

노후 상수도관의 개량사업이 지속적으로 시행되고 있지만 노후관 개량사업은 경험적 판단에 의존하는 노후관 평가 및 대안의 선정, 사고예방을 위한 대응적 차원의 개량 사업을 실시함으로 인해 경제적 손실은 물론 시스템의 유기적 기능향상이 이루어지지 않고 있는 실정이다. 이에 본 연구에서는 상수관로 중에서 아연도 강관, 도복장 강관, 닥타일 주철관을 선정하여 현장조사를 실시하였으며, 직접 채취된 관체 시편을 대상으로 육안분석, 관체분석, 그리고 토양부식성 등을 평가하여 채취한 관의 노후도를 종합적으로 평가하였다. 기본적으로 노후도 평가를 점수 평가법을 사용하였으며, 평가된 결과를 바탕으로 향후 노후 수도관 개량사업 추진 내용에서 개대체 우선순위를 결정하기 위한 모델을 제안하였다. 상수관로 노후도 영향 인자 및 가중치 추정은 현재 매설된 상수관로의 노후진척도를 평가하기 위한 노후도 예측모형의 기본 요소이며, 모형의 정확도를 향상시키기 위해 필수적인 사항이다. 관로 노후진척도 분석의 정확도는 장기간의 자료 수집을 통하여 이루어져 이에 대한 분석이 필요하며, 대상관로를 이용하여 개발된 제안식은 향후 지속적으로 현장조사를 실시하여 보완이 필요하겠지만, 노후수도관의 개량 우선순위를 분석하기 위한 매우 유용한 자료가 될 것으로 판단한다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.15 no.1
• /
• pp.51-58
• /
• 1991

Corrosion fatigue test was performed by the use of plane bending fatigue tester in marine environment having various specific resistance from 25(natural sea water) to 5000.ohm.cm. It is in order to investigate the effects of marine environmental factor on the corrosion fatigue fracture of SS41 steel. The main results obtained are as follows; 1. The aspect ratio(b/a) of corner crack growing in natural sea water is lower than that in air. 2. The surface crack growth rate(da/dN) in marine environment is faster than that in air and da/dN delaies with the specific resistance increased. 3. The experimental constant m of paris rule [da/dN=C(${\delta}$K)$^m$] decrease with the specific resistance decreased and the effect of corrosion in proportion to the specific resistance is more sensitive than that of stress intensity factor range(${\delta}$K) under region II. 4. The accelerative factor(${\alpha}$) in marine environment is about 1.1-2.7 and .alpha. is increase under the low region of stress intensity factor range(${\delta}$K). 5. The electrode potential($E_0$) gets less noble potential with the specific resistance decreased.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.945-945
• /
• 2012

본 연구에서는 낙동강 수계의 안동댐 유역을 대상지역으로 선정하여 미래 기후변화 시나리오에 따른 댐 유역의 수환경 영향을 예측해 보고자 하였다. 특히 미래기후에 대한 수환경 평가는 기후자료를 입력 값으로 요구하는 강우-유출모형을 이용하거나 유량 이외에 유사, 영양물질과 같은 수질인자를 동시에 모의할 수 있는 유역모형을 이용하여 평가하는 것이 일반적이다. 이를 위해 선행연구로 IPCC(Intergovernmental Panel on Climate Change)에서 제공하는 AR4 시나리오의 RCM 자료를 ANN(Artificial Neural Network)기법을 이용하여 안동댐 유역의 총 4개 기상관측소에 대한 과거 20년(1991~2010) 실측자료를 바탕으로 미래 강수 및 습도 그리고 온도에 대해 상세화 하여 미래 기후 시나리오를 생산하였다. 또한 안동댐 유역 단위의 수질을 예측하기 위해 토양과 토지이용 및 토지관리 상태에 따른 수문-수질 모의가 가능한 유역모형인 SWAT(Soil and Water Assessment Tool)을 이용하였다. 과거의 기상자료와 수질자료를 이용하여 유역모델의 검 보정을 실시하였으며 모형의 보정 및 검증결과에 따른 적합성과 상관성을 판단하기 위해 결정계수($R^2$)와 평균제곱근오차(Root Mean Square Error, RMSE)를 사용하였으며, 모형의 효율성 검증으로는 Nash and Sutcliffe(1970)가 제안한 모형효율성계수(NSE)를 사용하였다. 최종적으로 기후 시나리오에 대해서 전망된 지역상세기후를 유역모형의 입력자료로 이용하여 안동댐 유역의 미래수문 및 수질을 예측하고자 하였다.

• Korean Journal of Metals and Materials
• /
• v.47 no.12
• /
• pp.819-827
• /
• 2009

This work is concerned with a statistical analysis of factors affecting the irradiation-assisted stress corrosion cracking (IASCC) of austenitic stainless steels for core internals of pressurized water reactors (PWR). The microstructural and environmental factors were reviewed and critically evaluated by the statistical analysis. The Cr depletion at grain boundary was determined to have no significant correlation with the IASCC susceptibility. The threshold irradiation fluence of IASCC in a PWR was statistically calculated to decrease from 5.799 to 1.914 DPA with increase of temperature from 320 to $340^{\circ}C$. From the analysis of the relationship between applied stress and time-to-failure of stainless steel components based on an accelerated life testing model, it was found that B2 life of a baffle former bolt exposed to neutron fluence of 20 and 75 DPA was at least 2.5 and 0.4 year, respectively, within 95% confidence interval.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.12
• /
• pp.3731-3739
• /
• 2009

One-chambered sediment cells with a variety of anodic electrodes were tested for generation of electricity. Material used for anodes was iron, brass, zinc/iron, copper and graphite felt which was used for a common cathode. The estuarine sediment served as supplier of oxidants or electron-producing microbial habitat which evoked electrons via fast metal corrosion reactions or a complicated microbial electron transfer mechanism, respectively. Maximum power density and current density were found to be $6.90\;W/m^2$ (iron/zinc) and $7.76\;A/m^2$ (iron), respectively. Interestingly, copper wrapped with carbon cloth produced better electric performance than copper only, by 60%, possibly because the cloth not only prevented rapid corrosion on the copper surface by some degrees, but also helped growing some electron-emitting microbes on its surface. At anodes oxidation reduction potential(ORP) was kept to be stationary over time except at the very initial period. The pH reduction in the copper and copper/carbon electrodes could be a sign of organic acid production due to a chemical change in the sediment. The simple estimation of interfacial, electrical resistances of electrodes and electrolyte in the sediment cell that a key to the electricity generation should be in how to control corrosion rate or microbial electron transfer activity.

• Journal of the Korea Concrete Institute
• /
• v.17 no.6 s.90
• /
• pp.931-938
• /
• 2005

When concrete structures are exposed under marine condition for a long time, the steel in concrete is corroded due to the ingression of chlorides in the seawater. Because the damages of corrosion resulting from the chloride ion are very serious, many researches have been performed. Silver nitrate colormetric method that can measure easily penetration depth of chloride ion has been executed, recent)y. However, characteristics of silver nitrate colormetric method were not fully examined. Therefore, the objective of this paper Is to study the applicability of colormetric method. For the purpose of this, effect factors and reaction mechanism of colormetric method were investigated, and the colormetric method is applied for marine concrete structures. According to the results of silver nitrate colored method, two reactions such as white reaction of AgCl and brown reaction of AgOH were shown when $AgNO_3$ was sprayed in splited section. And velocity constant ratio(K) of two reactions appeared that white reaction, AgCl reacts with the fast speed by 3240. When the colormetric method was applied in concrete, it is reasonable that $AgNO_3$ solution more than 0.05N concentration was sprayed. It is confirmed that the colormetric method is useful tool for estimating the chloride of concrete structures in situ. The average chloride amount of colored parts indicates $0.9kg/m^3$ per concrete unit weight.

• Journal of the Society of Naval Architects of Korea
• /
• v.38 no.1
• /
• pp.72-85
• /
• 2001

A study for the structural strength evaluation on the doubler plate subjected to the biaxial in-plane compression has been performed through the systematic evaluation process. In order to estimate the proper static strength of doubler plate, elasto-plastic large deflection analysis is introduced including the contact effect between main plate and doubler. The characteristics of stiffness and strength variation are discussed based on their results. A1so, in order to compare the doubler structure with the original strength of main plate without doubler, a simple formula for the evaluation of the equivalent flat plate thickness is derived based on the additional series analysis of flat plate structure. Using this derived equation, the thickness change of a equivalent flat plate is analyzed according to the variation of various design parameters of doubler plate and some design guides are suggested in order to maintain the original strength of main plate without doubler reinforcement. Finally, correlation between derived equivalent flat plate formula and the developed buckling strength formulas by author et a1. is discovered and these relations are formulated for the future development of simple strength evaluation formula of doubler plate structure.

• Journal of Korea Water Resources Association
• /
• v.45 no.6
• /
• pp.517-529
• /
• 2012

Climate change can impact hydrologic processes of a watershed system. The integrated modeling systems need to be built to predict and analyze the possible impacts of climate change on water environment for the optimal water resource operation and management. In this study, Namgang Dam watershed in the Nakdong River basin was selected as a study area. To evaluate the vulnerability of Namgang Dam watershed caused by climate change, the change in hydrologic runoff were predicted using the watershed model, SWAT. The RCM scenario was analyzed and downscaled using the artificial neural network and the dynamic quantile mapping. The results of this study will be utilized for suggesting an effective counterplan for climate change, and finally to propose the optimal water resource management method.