• The Korean Journal of Mycology
• /
• v.14 no.3
• /
• pp.231-235
• /
• 1986

Spore production mechanism of selected lignicolous basidiomycetes was inhibited by soaking their sporocarps in water for varying periods. Depending on the duration of immersion, some species resumed spore discharge, while in others it was completely ruined. This was related to the nature and consistency of these sporocarps. All the species studied absorbed water quite readily into their sporocarps. The loss of this water through dehydration was more rapid in smaller and delicate species than the bulky and robust ones.

• Journal of Welding and Joining
• /
• v.17 no.4
• /
• pp.53-59
• /
• 1999

Amorphous alloys have also been called glassy alloys or non-crystalline alloys. They are made by the rapid solidification. The solidification occurs so rapid that the atoms are frozen in their liquid configuration. There are unique magnetic, mechanical, electrical and corrosive behaviors which result form their amorphous structure. In the study. amorphous coatings were manufactured with Ni-Cr-B-Si powders by flame spray. Measurement of hardness, were resistance, corrosion resistance and observation of microstructures and XRD, DSC were performed to investigate characteristics of amorphous coatings. The experimental results obtained as follow: 1) Amorphous powders could not be manufactured with the spraying in the spraying in the liquid nitrogen. But, amorphous coatings could be manufactured with the rotation cooling method by liquid nitrogen. In the fabrication of amorphous coatings, major factor was the rapid cooling by rotation of the substrate. 2) Hardness of coatings was obtained Hv 960 by formation of amorphous phase. But, wear resistance decreased. That was due to porosity in the coatings by the rapid cooling. 3) In the case of corrosion resistance, amorphous coatings were superior to air-cooled coatings. That was due to formation of amorphous phase. 4) After amorphous coatings were heat-treated at 520℃ for 1hr. hardness increased 80% and wear resistance increased 30% comparing with air cooled coatings. These were due to crystallization of amorphous phase and decrease of porosity by heat-treatment.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2003.11a
• /
• pp.38-42
• /
• 2003

In a pressurized water reactor, radioactive corrosion products (CRUD) in primary coolant system are one of the major sources for the occupational radiation exposure of the personnel in a nuclear power plant. Through the recent trend of long term fuel cycle in a nuclear power plant, radioactive corrosion products deposited in reactor core for a long time are also the cause of Axial Offset Anomaly (AOA) having an effect on reactor power by the hideout of boron. CRUD consist primarily of magnetite, nickel ferrite, cobalt ferrite, and so on. They have the characteristic of strong magnetism. Therefore it is peformed the conceptual design to develop the filter which removes the CRUD by magnetic field that is generated by an arrangement of permanent and electric magnets. Contrary to the conventional filter, the proposed filter does not interrupt the fluid flow, so there is little pressure drop and it can be used continuously. It is expected to be applied as one of the technologies for removal of the CRUD.

• Journal of the Korean Chemical Society
• /
• v.60 no.3
• /
• pp.169-176
• /
• 2016

In a borate buffer solution, the growth kinetics and the electronic properties of passive film on aluminum were investigated, using the potentiodynamic method, chronoamperometry, and multi-frequency electrochemical impedance spectroscopy. The corrosion of aluminum was heavily influenced by the degree of oxygen concentration because of the increasing reduction current. The oxide film formed during the passivation process of aluminum has showed the electronic properties of n-type semiconductor, which follow from the Mott-Schottky equation. It was found out that the passive film (Al(OH)₃) of Al formed in the low electrode potential changes to Al₂O₃ while the electrode potential increases. The growth kinetics data as measured by chronoamperometry suggests a mechanism in which the growth of the film of Al₂O₃ is determined by field-assisted transport of ions through the film.

• Korean Journal of Soil Science and Fertilizer
• /
• v.11 no.3
• /
• pp.127-144
• /
• 1979

Recent trend in the studies on the forming processes, chemical characteristics and chemical structure of humic substances with some discussions are reviewed and some arguments for the elucidation of the chemical structure of humic substances are summarized.

• Journal of Ocean Engineering and Technology
• /
• v.12 no.1
• /
• pp.32-38
• /
• 1998

This paper is to investigate of microhardness, adhesive strength, tensile strength, and fatigue strength of ceramic sprayed steel. Rotary bending fatigue tests have been conducted at room temperature in air and 3% NaCl solution using specimens of carbon steel(S45C) with sprayed coating layers of Ni-4.5% Al(under coating) and $TiO_2$ (top coating). The microhardness has been improved at $800^{\circ}C$ heat treatment and 150mm spraying distance. Tensile strength of the sprayed steel is dependent on the substrate strength. The fatigue strength of the sprayed steel is larger than that of substrate due to blasting and constraint surface of plastic deformation effect. In low stress level, the corrosion fatigue strength of the sprayed steel were lower than that of fatigue strength in air by corrosion.

• Journal of the Korean Chemical Society
• /
• v.56 no.1
• /
• pp.47-53
• /
• 2012

We have investigated the growth kinetics and electronic properties of passive film of zinc in borate buffer solution. The oxide film formed in passivation process of zinc has showed the electronic properties of n-type semiconductor based on the Mott-Schottky equation. And it was found out that the oxide film consisted ZnO and $Zn(OH)_2$ was composed of deep and shallow donors.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2009.04a
• /
• pp.323-326
• /
• 2009

콘크리트의 보강재로 높은 인장 강도와 비부식성, 비자기성, 비전기성 등의 장점을 갖는 FRP의 사용에 대한 연구가 활발히 진행되고 있다. 하지만 FRP가 갖는 낮은 탄성계수와 취성적 성질로 인해 기존 설계방법을 적용하기에는 문제가 있다. 본 연구에서는 보강비 변화에 따른 AFRP 보강 콘크리트 보의 구조 실험을 수행하여 FRP 보강근을 사용한 콘크리트 부재의 휨 성능 연구에 대한 기초적 자료를 제공하고자 하였다. 각 실험체의 결과 데이터를 비교 분석한 결과 균형보강비를 기준으로 저보강 실험체는 FRP의 파단에 의해 급격한 파괴양상을 보인 반면에, 과보강 실험체는 콘크리트가 압괴하는 파괴 징후를 보이며 파괴에 도달하였다. FRP 보강근을 사용한 보 부재의 설계에 균형보강 이상의 설계가 요구되며, 과보강의 경우 고강도 콘크리트의 사용이 요구되는 것으로 분석되었다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.60-64
• /
• 2005

강우-유출 모형을 수행하기 위해서는 지표면의 성질을 나타내는 보조 자료로서 식생피복자료, 토양분포, DEM 등이 주어지는데, 이러한 인자들이 흐름을 지배하게 되므로 중요하다. 그러므로 강우-유출 모형에서는 지표에서의 식생을 적절하게 나타내 줄 필요가 있는데, 최근의 원격 탐사 기술이 하나의 대안으로 제시되어 왔으며 식생 정보는 2차원 디지털 지도로 작성되어 수치모형에서는 이 디지털지도로부터 조도계수의 값을 전환하는 다단계 방법을 이용하여 오고 있다. 그러나 강우-유출 모형의 격자 간격이 식생 피복을 나타내기 위한 디지털 지도의 격자 간격과 항상 일치하는 것이 아니고 디지털 지도의 격자 간격이 일반적으로 더 세밀하므로 강우-유출 모형에서 디지털 지도를 이용하기 위해서는 적당한 방법의 스케일 확장 (up-scaling)이 필요하며, 이 연구에서는 질량 보존의 법칙을 사용하여 이론적 기반에 근거한 하나의 전략적인 방법이 제시된다. 이 연구의 목적은 강우-유출 모형의 수행 시 이질성을 보이는 지표면에서 식생과 관련된 매개변수를 통합/확장 처리하는 하나의 기법을 대기모형에서 이미 제시된 방법을 모사하여 제시함으로써 이질성을 보이는 지표면의 처리할 때 방향을 설정해 주고자함이다.

• Tribology and Lubricants
• /
• v.3 no.2
• /
• pp.15-22
• /
• 1987

윤활유는 일반적으로 윤활기유의 물성을 개량하기 위해 여러종류의 윤활유 첨가제를 포함하고 있는데 이 첨가제는 윤활기유가 가지고 있는 물성을 강화시키기 위해 첨가하는 것과 윤활기유에는 없는 물성을 얻기 위해 첨가하는 두가지로 나눌수 있다. 윤활기유의 산화분해, 열분해, 마찰이나 마모의 감소등을 위해 첨가흔 넉승 전자에 속하는 경우이고 기유 분해분의 침적을 막아주거나 부식을 방지하며 온도에 따른 점도변화를 극소화시키기 위한 첨가제는 후자에 해당한다. 즉 윤활유 첨가제는 윤활기유의 물리적, 화학적 성질을 보완 또는 강화시키므로서 윤활유로서의 소기의 목적을 달성하도록 첨가하는 화학물질을 말한다. 본 보에서는 위에서 열거한 여러종류의 첨가제 중 사용물량이 많아 수입대체 효과가 뚜렷한 6종의 첨가제의 국산화에 대한 연구결과를 간략하게 기술하였으며 앞으로 2회에 걸쳐 나누어 설명코자 한다.